Servo bracket set steering axle GH
31,49 €
incl. 19% VAT plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
In stock
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
| Weight | 0,055 kg |
|---|---|
| Dimensions | 15 × 8 × 1 cm |
You must be logged in to post a review.
You may also like…
1/14 Steered low loader axle
incl. 19% VAT
plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Related products
Half-round mudguard set
incl. 19% VAT
plus Shipping
Half-round mudguard set, scale 1/16, made of plastic, for trailers with single tires, dimensions: length 88mm, width 31mm, height 43mm, mounting hole spacing 55.5mm, steel retaining rods with M3 thread, for frame widths of 84mm, contents: 2 mudguards, 4 steel retaining rods, 1 instruction manual
Attention! Not suitable for children under 14 years of age.
item code: 220963
Rear light set FH16 XL750 (4×2)
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 XL750 (4×2), from 7.2 to 12 volts, true to original light functions and look of the tail lights with the following functions: Brake light, reversing light, fog light, parking light, blinker l+r, cable length approx. 55cm, contents: 1 set of housing with built-in circuit board
Attention : Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907702
Gear motor for low bed low loader
incl. 19% VAT
plus Shipping
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
item code : 907703
Plast. Parts Trailersus. w/8mm lift
incl. 19% VAT
plus Shipping
Trailer axle with lift kit + 8mm
incl. 19% VAT
plus Shipping
Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions
Item No. 907643
Caution! Not suitable for children under 14 years of age.
Ramp set Low loader GH TU4
incl. 19% VAT
plus Shipping
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
Wheel bolt remodeling-set
incl. 19% VAT
plus Shipping
Wheel bolt remodeling-set, for the front axle from all Tamiya - truck´s, if you change the wheel bolts and the ball heads you can reduce the clearenc ofthe wheel to a minimumt, so the steering works better, this shipment included: 2 wheel boltsfrom steel, 2 ball headsfrom steel, 2 shim rings and 2 lock washers and construction manual, Quantity: 1 set
Item code : 907091
Semitrailer with flat springs
incl. 19% VAT
plus Shipping
Semitrailer axle with flat springs, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 168mm, length of the flat springs ca.87mm, distance from centre to centre from the flat springs ca.112mm, holding fixture for flat springs from plastic, suitable for a width of frame from 96mm, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts
Item code : 907355
Reviews
There are no reviews yet.