Showing all 5 results

3-speed gearbox with transfer case and self-locking differential

289,00 
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm. The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm. Contents: 1 manual gearbox with distributor, fixing screws, linkages item code: 251106 Warning! Not suitable for children under 14 years.

Transfercase for 4-wheel drive

98,00 
Transfercase for 4-wheel drive, support set, the front axle can be connect with a servo, the output shaft have a diameter from 5mm and be feature with 4 ball bearings, speed reduction 2:1, this set is suitable for the 3-gear with item code 251100, instruction and fixing parts are included Item code 251180

2-speed control gear box

165,00 
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324 Item code: 242424

3-speed gearbox with transfer case

257,00 
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm. The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm. Contents: 1 manual gearbox with distributor, fixing screws, linkages Item code: 251105

3-speed gearbox

175,00 
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm Contents: 1 manual transmission, fixing screws, ball heads Item code: 251100