Gear motor for low bed low loader
99,99 €
incl. 19% VAT plus Shipping
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
item code : 907703
In stock
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
| Weight | 0105 kg |
|---|---|
| Dimensions | 14 × 85 × 4 cm |
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
Related products
Conv. Box Body for Tractor Vol.FH16 (56360)
incl. 19% VAT
plus Shipping
Conv. Box Body, scale 1/14, suitable for Tamiya Volvo FH16 (56360), metal kit
Product details:
Box body made of CNC-milled aluminium parts
Subframe made of sheet steel, laser-cut and CNC-bent
Plastic side panels screwed together in a sandwich design
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Dimensions: LxWxH: 545 x 195 x 195 mm
Total weight: 3,200 g
Warning! Not suitable for children under 14 years of age.
item code: 907732
Intermediate bearing block
incl. 19% VAT
plus Shipping
Intermediate bearing block, suitable for extra-long cardan shafts with an installation length of 165 mm to 330 mm, compatible with our cardan shafts, item nos. 251260 to 251287, double ball bearing, 5 mm steel shaft, total width 62 mm, height 15 mm, thickness 8 mm, shaft length 26 mm, contents: 1 bearing block, mounting screws
Warning! Not suitable for children under 14 years of age.
item code: 251240
Half-round mudguard set
incl. 19% VAT
plus Shipping
Half-round mudguard set, scale 1/16, made of plastic, for trailers with single tires, dimensions: length 88mm, width 31mm, height 43mm, mounting hole spacing 55.5mm, steel retaining rods with M3 thread, for frame widths of 84mm, contents: 2 mudguards, 4 steel retaining rods, 1 instruction manual
Attention! Not suitable for children under 14 years of age.
item code: 220963
Rear light set FH16 XL750 (4×2)
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 XL750 (4×2), from 7.2 to 12 volts, true to original light functions and look of the tail lights with the following functions: Brake light, reversing light, fog light, parking light, blinker l+r, cable length approx. 55cm, contents: 1 set of housing with built-in circuit board
Attention : Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907702
Scania SLT8x4 warning bar/strobo set
incl. 19% VAT
plus Shipping
Scania SLT8x4 warning bar/strobo set, suitable for the Scania SLT8x4 from Tamiya, for 7.2 or 12 volt, warning bar SMD LED circuit board with 40 SMD LEDs, 2 rotating beacons
with strobe function, contents: 1 warning bar circuit board, 2 rotating beacon inserts, installation instructions
Suitable electronics: 907685 Universal light module LBS (not included)
Attention : Not suitable for the MFC
Caution! Not suitable for children under 14 years of age.
item code: 907697
1/14 Steered low loader axle
incl. 19% VAT
plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Drive set for the Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Drive set for the Büssing 8000 S 13, consisting of a 7.2 volt underfloor motor with planetary gearbox from the company Servonaut, the motor is pre-disturbed , has an idle speed of 470 rpm, the rated speed is 390 rpm, rated torque: 34.6 Ncm, the matching motor holder made of aluminum and the cardan shaft made of stainless steel with appropriate length compensation, mounting hardware and installation instructions. Contents: 1 gear motor, 1 motor holder, 1 cardan shaft, installation instructions
Caution. Not suitable for children under 14 years.
item code: 251001
Reviews
There are no reviews yet.