Showing 1–12 of 14 results

Planetary gear plastic

14,95 
Planetary gear plastic, speed reduction 6:1, output shaft 4mm, housing and gear wheels from plastic Item code 224504

Planetary gear metal

24,95 
Planetary gear metal, speed reduction 3:1, output shaft 4mm, housing from plastic, gear wheels from steel Item code 215589

Planetary gear metal

24,95 
Planetary gear metal, speed reduction 6:1, output shaft 4mm, housing from plastic Item code 224503

3-speed gearbox with transfer case and self-locking differential

289,00 
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm. The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm. Contents: 1 manual gearbox with distributor, fixing screws, linkages item code: 251106 Warning! Not suitable for children under 14 years.

Four-wheel transfer case 1:1 with self-locking differential

125,00 
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages item code: 251200 Warning! Not suitable for children under 14 years.

Four-wheel transfer case 2:1 with self-locking differential

125,00 
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages item code: 251205 Warning! Not suitable for children under 14 years.

Transfer gear box

72,00 
Transfer gear box, scale 1:8, Housing from aluminum, pinion`s from steel, hardened, speed reduction 3:1, with ball bearing, 1 input and 2 output shaft`s with SW 5, holder from aluminum Item code: 216127

2-speed control gear box

165,00 
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324 Item code: 242424

Transfer gear box with differential

105,00 
Transfer gear box with differential for balancing 1:3, scale 1:8, housing from aluminum, sprocket from steel, hardened, speed reduction 3:1, one input - and two output-shaft`s with SW5, holder from aluminum Item code: 216119

Transfer gear box, shiftable

105,00 
Transfer gear box, shiftable, scale 1:8, perfect for off-road-driving, the front axle can be switching on or off with a servo, speed reduction 3:1, housing from aluminum, pinion`s from steel, hardened, with ball bearing, holder from aluminum Item code: 216933

3-speed gearbox with transfer case

257,00 
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm. The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm. Contents: 1 manual gearbox with distributor, fixing screws, linkages Item code: 251105

3-speed gearbox

175,00 
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm Contents: 1 manual transmission, fixing screws, ball heads Item code: 251100