Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions Item No. 907643 Caution! Not suitable for children under 14 years of age.
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
item code: 907644
Caution! Not suitable for children under 14 years of age.
Semitrailer axle with flat springs, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 168mm, length of the flat springs ca.87mm, distance from centre to centre from the flat springs ca.112mm, holding fixture for flat springs from plastic, suitable for a width of frame from 96mm, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts Item code : 907355
Flat bed axle with flat spings, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 176mm, length of the flat springs ca.70mm, distance from middle to middle from the flat springs ca.120mm, holding fixture for flat springs from plastic, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts Item code : 907354
Semi-trailer axle with dummy air bag bellows, scale 1/14, axle shaft from aluminium, wheel bolt from steel, link and axle suspension from plastic, bellow dummy fromrubber, total width with wheel bolt ca. 165mm, total height ca. 51mm, diameter of the wheel bolt 5mm, suitable for a width of frame from 96mm, Parts supplied with the kit include: axle shaft, wheel bolt´s, link, wheel suspension, dummy air bag bellows, fixing parts and construction manual. Item code 907069
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions Technical details: - Bogie made of sheet steel in sandwich construction - Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering - Drawbar (one-piece) made of fiber -reinforced plastic with checkered plate application - The drawbar is held by two tension springs for easier attachment - Coupling height 75 mm- Trailer axle with dummy air suspensionDanger! Attention! Not suitable for children under 14 years. item code: 907625
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. • Matching aluminum rims (front driven) Art.-No. • Incl.
Flat bed axle with bellow dummys, scale 1/14, kit from boosted fiber glass-plastik,axle shaft from metal, track width with tires 190mm, to need a width of frame from 76mm, diameter of the wheel axle 5mm, shipment from the kit include are 1 axle with fixing parts and construction manual Item code : 907140
1/14 Rear axle w/Diff.-Lock&fixed drive Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A huge advantage of these axles is that there is no need for additional space for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically when there is a traction loss. - High ground clearance thanks to a slim? - Self-locking differential (shifter servo, linkages and Bowden cables are not required) item code 907268
Wheel bolt remodeling-set, for the front axle from all Tamiya - truck´s, if you change the wheel bolts and the ball heads you can reduce the clearenc ofthe wheel to a minimumt, so the steering works better, this shipment included: 2 wheel boltsfrom steel, 2 ball headsfrom steel, 2 shim rings and 2 lock washers and construction manual, Quantity: 1 set Item code : 907091