Plast. Parts Trailersus. w/8mm lift
29,99 €
incl. 19% VAT plus Shipping
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
item code: 907644
Caution! Not suitable for children under 14 years of age.
In stock
SKU:
907644
Categories: Truck axles Scale 1/14, New Products
Description
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
Caution! Not suitable for children under 14 years of age.
Additional information
Weight | 0,070 kg |
---|---|
Dimensions | 26 × 12 × 3 cm |
Product safety
Product safety
Shipping & Delivery
Related products
Trailer side-marker light clear
19,90 €
incl. 19% VAT
plus Shipping
2-Axle Material Trailer
575,00 €
incl. 19% VAT
plus Shipping
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm
- CNC milled aluminum side panels with detailed surface engravings
- The side walls are locked by neodymium magnets
- All 5 drop sides are functional
- 5 hinges per side wall
- 4 hinges on the rear drop side
- Real wood floor application
- Chrome rims with ball bearings and wide tires
- Solid underrun protection made of steel (left / right)
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
- Mudguards with splash guards
- Bumper rag set
- CNC machined aluminum rear bumper
- Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
item code: 907624
Attention! Not suitable for children under 14 years.
Rear light board with housing Volvo FH16 tow truck
89,99 €
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 tow truck, from 7.2 to 12 volts, the following light functions: rear light with position light, left and right indicators, reversing light, fog light and brake light, metal rear light mask, cable length approx. 80cm, content: 1 right rear light, 1 left rear light, 2 metal rear light masks, tape, instructions
Attention! Not suitable for children under 14 years.
item code: 907632
VOLVO FH16 REAR LIGHT
83,99 €
incl. 19% VAT
plus Shipping
Volvo FH16 rear light, scale 1/14, suitable for the Volvo FH16 from Tamiya, from 7.2 to 12 volts, true-to-original light functions and look of the rear lights with the following functions: brake light, reversing light, fog light, parking light, indicator l + r, cable length approx 75cm, content: 1 set of housings with built-in circuit board
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907508
1/14 Tire insert 15mm
11,49 €
incl. 19% VAT
plus Shipping
Tire insert 15mm, scale 1/14, suitable for the tires 907011, 907014 and for the original Tamiya tires in a narrow design, made of cellular rubber (medium strength), this keeps the truck tire in shape and gives additional stability. Depending on the load, the better walking behavior on road and off-road courses is noticeable through higher traction. Can be used for all TAMIYA tractors, semitrailers and trailers with narrow tires. Contents: 2 tire inserts 15mm
Attention! Not suitable for children under 14 years.
item code: 907516
1/14 Rear axle w/Diff.-Lock&fixed drive
200,00 €
incl. 19% VAT
plus Shipping
1/14 Rear axle w/Diff.-Lock&fixed drive
Official licensed by ZF Friedrichshafen AG.
The CARSON drive concept for TAMIYA trucks in 1:14 scale
Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A huge advantage of these axles is that there is no need for additional space for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically when there is a traction loss. Officially licensed by ZF Friedrichshafen AG.
- Detailed rear axle
- Reinforced plastic axle housing
- High ground clearance thanks to a slim? Differential housing (height 33 mm)
- 12-way ball bearing
- Hardened steel bevel gears
- axle ratio 1: 2,66
- 5 mm transmission / input shaft
- Aluminum rim driver 12 mm hexagon
- Easy conversion to the axle with and without drive (both shafts and housing covers are included in the axle kit)
- Dimensions rear axle LxBxH: 44 x 135 x 33 mm
- Weight approx. 150 g
- Delivered as kit with pre-assembled differential
- Suitable for TAMIYA suspension and independent suspension
- Suitable for all TAMIYA and CARSON truck rims with 12 mm hexagonal driver
- Self-locking differential (shifter servo, linkages and Bowden cables are not required)
item code 907268
Wheel bolt remodeling-set
18,29 €
incl. 19% VAT
plus Shipping
Wheel bolt remodeling-set, for the front axle from all Tamiya - truck´s, if you change the wheel bolts and the ball heads you can reduce the clearenc ofthe wheel to a minimumt, so the steering works better, this shipment included: 2 wheel boltsfrom steel, 2 ball headsfrom steel, 2 shim rings and 2 lock washers and construction manual, Quantity: 1 set
Item code : 907091
Flat bed axle with flat springs
59,99 €
incl. 19% VAT
plus Shipping
Flat bed axle with flat spings, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 176mm, length of the flat springs ca.70mm, distance from middle to middle from the flat springs ca.120mm, holding fixture for flat springs from plastic, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts
Item code : 907354