Showing 1–12 of 26 results

Gear diff

7,09 
Gear diff, module 1, 36 teeth, steel Item code : 216224

Gearmotor e-Support

29,99 
Gearmotor e-Support, suitable for supporting set item code  907018Rated voltage 7.4 VDC, idle speed 130 U / min, ratio 1: 100, continuous current 0.8 A, Contents: 1 Engine item code : 907199

Planetary gear plastic

14,95 
Planetary gear plastic, speed reduction 6:1, output shaft 4mm, housing and gear wheels from plastic Item code 224504

Planetary gear metal

24,95 
Planetary gear metal, speed reduction 3:1, output shaft 4mm, housing from plastic, gear wheels from steel Item code 215589

Planetary gear metal

24,95 
Planetary gear metal, speed reduction 6:1, output shaft 4mm, housing from plastic Item code 224503

Universal – Differential

35,95 
Universal - Differential, with spur gears, housing from aluminium turned, pinion`s from steel, the input comes from the pinion with item code: 216224 over the housing, also you have 2 half wave`s with a diameter from 6mm for the power transmission at one`s disposal Item code: 216208

3-speed gearbox with transfer case and self-locking differential

289,00 
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm. The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm. Contents: 1 manual gearbox with distributor, fixing screws, linkages item code: 251106 Warning! Not suitable for children under 14 years.

Four-wheel transfer case 1:1 with self-locking differential

125,00 
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages item code: 251200 Warning! Not suitable for children under 14 years.

Gear motor spindle drive Fliegl

69,99 
Gear motor spindle drive Fliegl, rated voltage 7.2 voltsidle speed 262 rev / mincontinuous current 1.5A peak torque 588mNm, reduction ratio 66: 1, weight 88g, dim .: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3 , Contents: 1 gear motor item code : 907166

Four-wheel transfer case 2:1 with self-locking differential

125,00 
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages item code: 251205 Warning! Not suitable for children under 14 years.

Drive – gear motor LR 634

47,49 
Drive - gear motor LR 634, you need 2 pice of them, rated voltage 6 Volt, idle-running speed 114 U/min, transmission 125:1, continuous current 1,8 A, continuous torque 300mNm, suitable for the actuation set with item code: 907105 Item code: 907106

Gear motor

44,99 
Gear motor, line voltage 6 Volt, idle-speed 300 U/min Item code 907066