Regardless if you are on a construction site or on the street, with our trailers you always will get noticed. Heavy metal for the construction site. With our new Liebherr LR L634 crawler loader and dump truck you will get into action.
2-axle trailer in scale 1/16 suitable for the Büssing 8000 S13 ( item no. 251000 ) ( the expected delivery date is in November ) The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road. The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture. A lighting set is optionally available for the 2-axle trailer (item no. 251004). Technical details: Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g. Scope of delivery: - Milling plates made of polystyrene for frame, bogie and flatbed - Drop sides made of injection molded parts - Steel axles with leaf spring suspension - Trilex - double rims with Fulda Coloss tires - Bracket with spare tire - Platform with real wooden floor - Tail lights with license plate holder - Towing eye and drawbar made of reinforced plastic - Decal sheet and detailed building instructions Caution. Not suitable for children under 14 years. item code: 251003
Büssing 8000 S 13
Büssing 8000 S 13 as a new edition in scale 1:16 In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters. More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever. Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road. Technical details: Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g. The kit is supplied unpainted. Scope of delivery: - Frame made of aluminum with all drill - and threaded holes - Ball bearing rear axle made of reinforced plastic with metal differential - Front axle made of reinforced plastic - Ball bearing Trilex - rims in front, in the rear Trilex - double rims - original Fulda Coloss tires plus spare tires - Leaf spring set front and rear made of spring steel - driver's cab consists of several plastic parts (ABS) - flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor - Interior, tank, air tank, splash flaps, hardware parts, exhaust etc. - Decal sheet and detailed building instructions Caution. Not suitable for children under 14 years. item code: 251000
Flatbed trailer III made of steel
Flatbed trailer III, scale 1/14 Technical details: - Torsion-resistant steel frame in sandwich construction - Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent - Solid aluminum front wall - Detailed trailer axles with dummy air springs, optionally with a +8mm lift - Solid steel underride protection (left/right) - Steel spare wheel holder with spare wheel - Chrome rims with ball bearings and wide road tires - 7-chamber taillights and license plate - holder included 16 lashing eyes - Real wood floor application - 8mm aluminum bumper - detailed assembly instructions + decal sheet Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g Item No. 907650 Caution! Not suitable for children under the age of 14.
2-Axle Material Trailer
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set. Technical details: - Torsion-resistant steel frame in sandwich construction - Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent - Bogie made of sheet steel in sandwich construction - Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering - Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application - The drawbar is held by two tension springs for easier attachment - Coupling height 75 mm - CNC milled aluminum side panels with detailed surface engravings - The side walls are locked by neodymium magnets - All 5 drop sides are functional - 5 hinges per side wall - 4 hinges on the rear drop side - Real wood floor application - Chrome rims with ball bearings and wide tires - Solid underrun protection made of steel (left / right) - Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation) - Mudguards with splash guards - Bumper rag set - CNC machined aluminum rear bumper - Decor set, detailed building instructions Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm item code: 907624 Attention! Not suitable for children under 14 years.
3-axle Fliegl Megarunner
3-axle Fliegl Megarunner, in the Tamiya scale, kit, new aluminum door hinges with 270 ° opening angle, new door locks The kit contains no painted parts - Air spring dummies on all 3 axes - steel frame, (laser cut) - Tarpaulin red with Fliegl logo - 6 semi-trailer rims, wide, chrome + 6 wide tires - Wheels are 12 ball bearings - 7-chamber taillights (without bulbs) - Underride protection made of steel - license plate (illuminated) - Plastic mudguards with brackets - Semi-trailer bumper with lasered Fliegl logo - Semi-trailer props, mechanically height adjustable - Spare wheel holder one-armed - Detailed construction manual Dimensions: 995x195x270mm Weight 6.000 gr. Max.load 10kg. item code : 907235 Warning! Not suitable for children under 14 years.
Semi Trailer The white 3-axles box trailer fits perfectly to various Tamiya Trucks. item code: 907092
Stanchion Trailer II
Flatbed Trailer II
Flatbed Trailer This modern 3-axle platform trailer is a successful addition to various Tamiya trucks. item code: 907081
3-Axle Heavy Low Loader
3-Axle Heavy Low Loader A successful addition to the various TAMIYA tractors. The ramp can be folded down by hand to drive on. The kit impresses with the following features: CNC machined aluminum frame plus king pin • Height adjustable trailer supports • 3 axles with twin tires suspended from leaf springs • ball bearing • 4-chamber rear lights can be electrically retrofitted. Suitable for all TAMIYA tractors. The ramp can be folded down by hand to drive on. The trailer is equipped with three axles with twin tires. The chassis is suspended with leaf springs. The CNC machined frame is made of aluminum. All supports are mechanically adjustable. The 4-chamber taillights can be electrically retrofitted. Length: ca. 990 mm, Width:ca. 190 mm, Height: ca. 135mm, Weight:ca .4,5 kg Attention! Not suitable for children under 14 years. item code: 907000
2-axle stanchion-trailer Riedler
2-axle stake trailer Riedler The 2-axle stanchion trailer from "Riedler Fahrzeugbau" reflects its attractive workmanship and appearance as in the original as well as in the model and makes the trailer an unmistakable companion on real roads, as well as in the model on the course. In conjunction with the TAMIYA Volvo FH16 timber transporter, this articulated train becomes a workhorse and is in no way inferior to the original. The massive frame made of sheet steel in connection with the aluminum stake allow a payload of approx. 5,500g. So that the different lengths of wood also lie optimally on the stanchions, they can be moved and freely positioned on the chassis frame. To refine the 2-axle stake trailer, an optional set (item no .: 907623, with spare wheel and holder, 2 compressed air tanks and a lashing set) is available. For use on the TAMIYA Volvo FH16 tractor, the towing hitch with item no .: 907182 is required, the assembly is carried out on the existing frame end crossmember. Product details: - 1:14 scale - Torsionally stiff steel frame in sandwich construction - Frame made of 3 and 1 mm steel sheet laser cut and CNC bent - Turntable made of sheet steel in sandwich construction - Stored turntable (adjustable) with sliding pad for easy maneuvering - Drawbar (one-piece) made of fiber-reinforced plastic with Checker plate application - For easier attachment, the drawbar is attached to two Tension springs held in the coupling height of 75 mm - Posts (one piece) milled from solid aluminum material - Post bracket can be loosened using two grub screws be repositioned or removed as needed become. - Trailer axles with dummy air springs - Ball-bearing chrome rims with wide tires - Solid aluminum underride protection (left / right) - Mudguard splash guard and bumper grille set - CNC milled aluminum rear bumper - 7-chamber taillights, license plate holder and Work lights included - Decor set Dim .: LxWxH: 620 x 190 x 305 mm Weight: 2,600g - Optional Available: 907623 Accessory set for 2-axle Riedler stanchions * Official Licensed by Ernst Riedler Fahrzeugbau- und Vertriebs.m.b.H Attention! Not suitable for children under 14 years. item code: 907622
3-AXLE STANCHION TRAILER III, NEW SUSP.
3-AXLE STANCHION TRAILER III, NEW SUSP. The new 3-axle stanchion trailer from CARSON for transporting logs or similar long loads is a perfect addition to the TAMIYA tractors. The basis for the trailer is a newly developed torsion-resistant frame (sandwich construction) made of 3 and 1 mm laser-cut sheet steel. A new suspension is also included, this can optionally be raised by 8 mm and thus balances the level of the saddle to a higher tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. Depending on the load and requirements, the six aluminum stanchions can be steplessly positioned on the chassis or removed. These are loosened or fixed using the two countersunk grub screws. A massive steel front wall secures the load to the front of the tractor. Two work lights can be optionally mounted on the front wall and also on the rear frame, the fixings are already provided. A stable underrun protection and a spare wheel holder made of steel complete the detailing of the model. Technical details: - Torsion-resistant steel frame in sandwich construction - Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent - Solid steel front wall - Stakes (one-piece) milled from solid aluminum - The stanchion bracket can be loosened using two grub screws and repositioned or removed as required. - Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm - Solid underrun protection made of steel (left / right) - One-arm spare wheel holder made of steel with spare wheel - Chrome rims with ball bearings and wide off-road tires - 7-chamber taillights and license plate holder included - Decor set, detailed building instructions Dimensions: LxWxH: 980 x 190 x 310 mm, weight: 5,100 g Attention! Not suitable for children under 14 years. item code: 907629
2-axle dolly rigid for Gigaliners
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers. - steel frame (laser cut and welded) - 7 chamber taillights - 8-way ball-bearing wheels - Air spring dummies - Saddle plate made of plastic - Tiller made of aluminum, adjustable in length and height Technical specifications: Length: 365mm Width: approx. 195mm Height: about 85mm item code : 907210 Warning! Not suitable for children under 14 years.