Liebherr LR 634 track loader
1.620,00 €
incl. 19% VAT plus Shipping
Liebherr LR 634 Track Loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale.
item code: 907111
Out of stock
Liebherr LR 634 track loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
The original: For the Litronic LR 634 crawler loader, the proven Liebherr hydrostatic drive system is used. Both chains have independent friction drive. The Litronic LR 634 system allows optimal control of driving speed and all steering movements. With a simple hand movement you can select any steering radius, right down to in-place rotation. The robust bell-crank linkage with cast cross tube provides maximum breakaway torque for the loading shovel, and the deep rake of the windscreen gives the best possible view of the work equipment.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale. At 15 kg unloaded and with a powerful chain drive, this “little” track loader is a real workhorse. The loading shovel and main frame are made of steel, giving the model the stability to handle shovel and lift operations.
The steel mast is brought to life by an optional powerful spindle drive. The 2-studded chain of reinforced plastic is run by steel support rollers and ensures traction on any terrain. Countless fittings and interior equipment in the cabin give the model an authentic look.
Scope of delivery:
Kit model (demonstration model only) of the Liebherr LR 634 track loader · manual · decal sheet.
Technical Data:
Length: 530 mm
Width: 185 mm
Height: 250 mm
| Weight | 9 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Electronic unit LR 634
incl. 19% VAT
plus Shipping
Electronic unit LR 634, included: 5 controller, the left and the right track forward and back, lift arm up and down, tilting forward and back, rear ripper up and down, infinitely variable, for operation the tilting and lifting with limit switch,signal for drive back, light effect, voltage control: 1 electronic unit, 1 limit switch lift arm, 1 limit stop tilting, cabling for the lighting, connecting cable, instruction
Item code: 907103
Gear actuation set LR 634
incl. 19% VAT
plus Shipping
Gear actuation set LR 634 Included in the gear actuation set for the LR 634, are all the piece`s required for the actuation of the track loader. Sprocket`s are made from hardened steel, with ball bearing, motor-holder from aluminum, fixing parts and fixing instruction, we have a proper gear motor with item code: 907106 ( you need 2 of them ), includet:: 1 motor holder for right and 1 motor holder for left, a pair of bevel pinion`s pre-installed, drive shaft with cogging, screws and instruction
Item code: 907105
Spindle drive set lift & bucket LR 634
incl. 19% VAT
plus Shipping
Spindle drive set lift & bucket LR 634, suitable for the Liebherr track loader LR 634 with item code: 907111. Spindle`s and driving pinion`s are from hardened steel, housing from aluminium, pre-installed, with all of the fixing parts and instruction, included: 1 lift spindle and 1 bucket spindle with a cylinder cap. Therefor suitable the gear motor`s with item code: 907108 for the bucket and 907066 for the lift (not included in this set).
Item code: 907102
Related products
3-axle Material trailer 1/16
incl. 19% VAT
plus Shipping
3-axle Material trailer, scale 1/16, kit, unpainted
Product details:
- Torsion-resistant steel frame in sandwich construction (3 and 1 mm steel, laser cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball bearings
- Real wood floor application
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Side walls are locked with neodymium magnets
- All 9 side walls are functional
- 4 hinges per side wall (hinges made of 1 mm sheet steel)
- Side wall posts can be removed
- Aluminium front wall
- Steel underride guard (left/right)
- Single-arm steel spare wheel holder with spare wheel
- 16 lashing eyes
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Loading area 941x167mm
Saddle height 90 - 100mm
Weight 5,500g
Warning! Not suitable for children under 14 years of age.
item code: 251050
3-axle trailer
incl. 19% VAT
plus Shipping
3-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1950 had a permissible total weight of 24 tons and was equipped with twin tyres.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-moulded plastic drop sides and is covered with a real wooden floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at coupling height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and number plate holder complete the picture.
Optionally a lighting set is available for the 3-axle trailer art.no. 251006 (not included in the kit).
Technical details:
Total length approx. 635mm, length flatbed approx. 520mm, width approx. 160mm, total height approx. 125mm, weight approx. 1,350g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed.
- Platform gates made of injection moulded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tyres
- Bracket with spare tyres
- Platform with real wood floor
- Rear lights with number plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Attention! Not suitable for children under 14 years.
item code: 251005
Flatbed trailer III made of steel
incl. 19% VAT
plus Shipping
Flatbed trailer III, scale 1/14 Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid aluminum front wall
- Detailed trailer axles with dummy air springs, optionally with a +8mm lift
- Solid steel underride protection (left/right)
- Steel spare wheel holder with spare wheel
- Chrome rims with ball bearings and wide road tires
- 7-chamber taillights and license plate
- holder included 16 lashing eyes
- Real wood floor application
- 8mm aluminum bumper
- detailed assembly instructions + decal sheet
Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g
Item No. 907650
Caution! Not suitable for children under the age of 14.
2-axle dolly rigid for Gigaliners
incl. 19% VAT
plus Shipping
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers.
- steel frame (laser cut and welded)
- 7 chamber taillights
- 8-way ball-bearing wheels
- Air spring dummies
- Saddle plate made of plastic
- Tiller made of aluminum, adjustable in length and height
Technical specifications:
Length: 365mm
Width: approx. 195mm
Height: about 85mm
item code : 907210
Warning! Not suitable for children under 14 years.
2-axle dump truck semi-trailer
incl. 19% VAT
plus Shipping
2-axle dump truck semi-trailer, Tamiya scale, kit, tailgate with automatic 2-hook lock
- Trough and rear wall made of hard PVC, milled
- Air spring dummies
- Aluminum chassis, milled
- 8 times ball-bearing
- 4 semi-trailer rims, wide
- 4 wide tires
- 7-chamber taillights (without bulbs)
- license plate (illuminated)
- Plastic mudguards with holders
- Latch tailgate
- Aluminum underrun protection, milled
- Semi-trailer props, mechanically adjustable
- Pedestal aluminum / plastic
- Hydraulic cylinder dummy
item code : 907312
Warning! Not suitable for children under 14 years.
3-axle Fliegl Megarunner
incl. 19% VAT
plus Shipping
3-axle Fliegl Megarunner, in the Tamiya scale, kit, new aluminum door hinges with 270 ° opening angle, new door locks
The kit contains no painted parts
- Air spring dummies on all 3 axes
- steel frame, (laser cut)
- Tarpaulin red with Fliegl logo
- 6 semi-trailer rims, wide, chrome + 6 wide tires
- Wheels are 12 ball bearings
- 7-chamber taillights (without bulbs)
- Underride protection made of steel
- license plate (illuminated)
- Plastic mudguards with brackets
- Semi-trailer bumper with lasered Fliegl logo
- Semi-trailer props, mechanically height adjustable
- Spare wheel holder one-armed
- Detailed construction manual
Dimensions: 995x195x270mm Weight 6.000 gr. Max.load 10kg.
item code : 907235
Warning! Not suitable for children under 14 years.
Reviews
There are no reviews yet.