Liebherr LR 634 track loader
1.620,00 €
incl. 19% VAT plus Shipping
Liebherr LR 634 Track Loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale.
item code: 907111
Out of stock
Liebherr LR 634 track loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
The original: For the Litronic LR 634 crawler loader, the proven Liebherr hydrostatic drive system is used. Both chains have independent friction drive. The Litronic LR 634 system allows optimal control of driving speed and all steering movements. With a simple hand movement you can select any steering radius, right down to in-place rotation. The robust bell-crank linkage with cast cross tube provides maximum breakaway torque for the loading shovel, and the deep rake of the windscreen gives the best possible view of the work equipment.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale. At 15 kg unloaded and with a powerful chain drive, this “little” track loader is a real workhorse. The loading shovel and main frame are made of steel, giving the model the stability to handle shovel and lift operations.
The steel mast is brought to life by an optional powerful spindle drive. The 2-studded chain of reinforced plastic is run by steel support rollers and ensures traction on any terrain. Countless fittings and interior equipment in the cabin give the model an authentic look.
Scope of delivery:
Kit model (demonstration model only) of the Liebherr LR 634 track loader · manual · decal sheet.
Technical Data:
Length: 530 mm
Width: 185 mm
Height: 250 mm
| Weight | 9 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Electronic unit LR 634
incl. 19% VAT
plus Shipping
Electronic unit LR 634, included: 5 controller, the left and the right track forward and back, lift arm up and down, tilting forward and back, rear ripper up and down, infinitely variable, for operation the tilting and lifting with limit switch,signal for drive back, light effect, voltage control: 1 electronic unit, 1 limit switch lift arm, 1 limit stop tilting, cabling for the lighting, connecting cable, instruction
Item code: 907103
Gear actuation set LR 634
incl. 19% VAT
plus Shipping
Gear actuation set LR 634 Included in the gear actuation set for the LR 634, are all the piece`s required for the actuation of the track loader. Sprocket`s are made from hardened steel, with ball bearing, motor-holder from aluminum, fixing parts and fixing instruction, we have a proper gear motor with item code: 907106 ( you need 2 of them ), includet:: 1 motor holder for right and 1 motor holder for left, a pair of bevel pinion`s pre-installed, drive shaft with cogging, screws and instruction
Item code: 907105
Spindle drive set lift & bucket LR 634
incl. 19% VAT
plus Shipping
Spindle drive set lift & bucket LR 634, suitable for the Liebherr track loader LR 634 with item code: 907111. Spindle`s and driving pinion`s are from hardened steel, housing from aluminium, pre-installed, with all of the fixing parts and instruction, included: 1 lift spindle and 1 bucket spindle with a cylinder cap. Therefor suitable the gear motor`s with item code: 907108 for the bucket and 907066 for the lift (not included in this set).
Item code: 907102
Related products
2-axle boxed trailer
incl. 19% VAT
plus Shipping
2-axle boxed trailer, scale 1/14, suitable for Volvo FH16 (56360), metal kit
Product details:
Torsion-resistant steel frame in sandwich construction
Frame made of 3 and 1 mm sheet steel, laser-cut and CNC-bent
Steel sheet bogie in sandwich construction
Bearing bogie (adjustable) with sliding pads for easy manoeuvring
Drawbar (one-piece) made of fibre-reinforced plastic with chequer plate application
The drawbar is held in place by two tension springs for easier coupling
Coupling height 75 mm
Box body made of CNC-milled aluminium parts
Plastic side panels screwed on in sandwich look
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Ball-bearing chrome rims with wide tyres
Solid steel underride guard (left/right)
Detailed semi-trailer axles with dummy air springs, optionally with + 8 mm lift (kit contains both versions with/without lift)
Mudguards with splash guards
Bumper mud flap set
CNC-milled aluminium rear bumper
Decor set, detailed assembly instructions
Dimensions: LxWxH: 545 x 195 x 290 mm
Total weight: 4,800 g
Warning! Not suitable for children under 14 years of age.
item code: 907731
2-Axle Material Trailer
incl. 19% VAT
plus Shipping
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm
- CNC milled aluminum side panels with detailed surface engravings
- The side walls are locked by neodymium magnets
- All 5 drop sides are functional
- 5 hinges per side wall
- 4 hinges on the rear drop side
- Real wood floor application
- Chrome rims with ball bearings and wide tires
- Solid underrun protection made of steel (left / right)
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
- Mudguards with splash guards
- Bumper rag set
- CNC machined aluminum rear bumper
- Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
item code: 907624
Attention! Not suitable for children under 14 years.
3-AXLE STANCHION TRAILER III, NEW SUSP.
incl. 19% VAT
plus Shipping
3-AXLE STANCHION TRAILER III, NEW SUSP. The new 3-axle stanchion trailer from CARSON for transporting logs or similar long loads is a perfect addition to the TAMIYA tractors. The basis for the trailer is a newly developed torsion-resistant frame (sandwich construction) made of 3 and 1 mm laser-cut sheet steel. A new suspension is also included, this can optionally be raised by 8 mm and thus balances the level of the saddle to a higher tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. Depending on the load and requirements, the six aluminum stanchions can be steplessly positioned on the chassis or removed. These are loosened or fixed using the two countersunk grub screws. A massive steel front wall secures the load to the front of the tractor. Two work lights can be optionally mounted on the front wall and also on the rear frame, the fixings are already provided. A stable underrun protection and a spare wheel holder made of steel complete the detailing of the model.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid steel front wall
- Stakes (one-piece) milled from solid aluminum
- The stanchion bracket can be loosened using two grub screws and repositioned or removed as required.
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm - Solid underrun protection made of steel (left / right)
- One-arm spare wheel holder made of steel with spare wheel
- Chrome rims with ball bearings and wide off-road tires
- 7-chamber taillights and license plate holder included
- Decor set, detailed building instructions
Dimensions: LxWxH: 980 x 190 x 310 mm, weight: 5,100 g
Attention! Not suitable for children under 14 years.
item code: 907629
3-Axle Heavy Low Loader
incl. 19% VAT
plus Shipping
3-Axle Heavy Low Loader
A successful addition to the various TAMIYA tractors. The ramp can be folded down by hand to drive on.
The kit impresses with the following features:
CNC machined aluminum frame plus king pin
• Height adjustable trailer supports
• 3 axles with twin tires suspended from leaf springs
• ball bearing
• 4-chamber rear lights can be electrically retrofitted.
Suitable for all TAMIYA tractors.
The ramp can be folded down by hand to drive on.
The trailer is equipped with three axles with twin tires. The chassis is suspended with leaf springs. The CNC machined frame is made of aluminum. All supports are mechanically adjustable. The 4-chamber taillights can be electrically retrofitted.
Length: ca. 990 mm, Width:ca. 190 mm, Height: ca. 135mm, Weight:ca .4,5 kg
Attention! Not suitable for children under 14 years.
item code: 907000
2-axis Dump Trailer
incl. 19% VAT
plus Shipping
2-axis Dump Trailer, 1/14 scale, fits the Arocs tipper Tamiya
Technical details:
• Kit
• Steel profile frame (laser cut and welded)
• Trough made of hard PVC (gray)
• 8-way ball-bearing wheels
• Fulda Variotonn off-road tires
• 7-chamber taillights
• Semitrailer axles with air spring dummies
• Automatic 2-hook rear panel lock
Length: 570mm, width: 190mm, height: 200mm, weight: 3.000g
item code: 907425
Attention! Not suitable for children under 14 years.
Goldhofer TU4 flatbed trailer
incl. 19% VAT
plus Shipping
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Reviews
There are no reviews yet.