Liebherr LR 634 track loader
1.620,00 €
incl. 19% VAT plus Shipping
Liebherr LR 634 Track Loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale.
item code: 907111
Out of stock
Liebherr LR 634 track loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
The original: For the Litronic LR 634 crawler loader, the proven Liebherr hydrostatic drive system is used. Both chains have independent friction drive. The Litronic LR 634 system allows optimal control of driving speed and all steering movements. With a simple hand movement you can select any steering radius, right down to in-place rotation. The robust bell-crank linkage with cast cross tube provides maximum breakaway torque for the loading shovel, and the deep rake of the windscreen gives the best possible view of the work equipment.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale. At 15 kg unloaded and with a powerful chain drive, this “little” track loader is a real workhorse. The loading shovel and main frame are made of steel, giving the model the stability to handle shovel and lift operations.
The steel mast is brought to life by an optional powerful spindle drive. The 2-studded chain of reinforced plastic is run by steel support rollers and ensures traction on any terrain. Countless fittings and interior equipment in the cabin give the model an authentic look.
Scope of delivery:
Kit model (demonstration model only) of the Liebherr LR 634 track loader · manual · decal sheet.
Technical Data:
Length: 530 mm
Width: 185 mm
Height: 250 mm
| Weight | 9 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Electronic unit LR 634
incl. 19% VAT
plus Shipping
Electronic unit LR 634, included: 5 controller, the left and the right track forward and back, lift arm up and down, tilting forward and back, rear ripper up and down, infinitely variable, for operation the tilting and lifting with limit switch,signal for drive back, light effect, voltage control: 1 electronic unit, 1 limit switch lift arm, 1 limit stop tilting, cabling for the lighting, connecting cable, instruction
Item code: 907103
Gear actuation set LR 634
incl. 19% VAT
plus Shipping
Gear actuation set LR 634 Included in the gear actuation set for the LR 634, are all the piece`s required for the actuation of the track loader. Sprocket`s are made from hardened steel, with ball bearing, motor-holder from aluminum, fixing parts and fixing instruction, we have a proper gear motor with item code: 907106 ( you need 2 of them ), includet:: 1 motor holder for right and 1 motor holder for left, a pair of bevel pinion`s pre-installed, drive shaft with cogging, screws and instruction
Item code: 907105
Spindle drive set lift & bucket LR 634
incl. 19% VAT
plus Shipping
Spindle drive set lift & bucket LR 634, suitable for the Liebherr track loader LR 634 with item code: 907111. Spindle`s and driving pinion`s are from hardened steel, housing from aluminium, pre-installed, with all of the fixing parts and instruction, included: 1 lift spindle and 1 bucket spindle with a cylinder cap. Therefor suitable the gear motor`s with item code: 907108 for the bucket and 907066 for the lift (not included in this set).
Item code: 907102
Related products
3-axle Material trailer 1/16
incl. 19% VAT
plus Shipping
3-axle Material trailer, scale 1/16, kit, unpainted
Product details:
- Torsion-resistant steel frame in sandwich construction (3 and 1 mm steel, laser cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball bearings
- Real wood floor application
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Side walls are locked with neodymium magnets
- All 9 side walls are functional
- 4 hinges per side wall (hinges made of 1 mm sheet steel)
- Side wall posts can be removed
- Aluminium front wall
- Steel underride guard (left/right)
- Single-arm steel spare wheel holder with spare wheel
- 16 lashing eyes
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Loading area 941x167mm
Saddle height 90 - 100mm
Weight 5,500g
Warning! Not suitable for children under 14 years of age.
item code: 251050
Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
2-Axle Material Trailer
incl. 19% VAT
plus Shipping
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm
- CNC milled aluminum side panels with detailed surface engravings
- The side walls are locked by neodymium magnets
- All 5 drop sides are functional
- 5 hinges per side wall
- 4 hinges on the rear drop side
- Real wood floor application
- Chrome rims with ball bearings and wide tires
- Solid underrun protection made of steel (left / right)
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
- Mudguards with splash guards
- Bumper rag set
- CNC machined aluminum rear bumper
- Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
item code: 907624
Attention! Not suitable for children under 14 years.
2-axle stanchion-trailer Riedler
incl. 19% VAT
plus Shipping
2-axle stake trailer Riedler
The 2-axle stanchion trailer from "Riedler Fahrzeugbau" reflects its attractive workmanship and appearance as in the original as well as in the model and makes the trailer an unmistakable companion on real roads, as well as in the model on the course.
In conjunction with the TAMIYA Volvo FH16 timber transporter, this articulated train becomes a workhorse and is in no way inferior to the original. The massive frame made of sheet steel in connection with the aluminum stake allow a payload of approx. 5,500g. So that the different lengths of wood also lie optimally on the stanchions, they can be moved and freely positioned on the chassis frame.
To refine the 2-axle stake trailer, an optional set (item no .: 907623, with spare wheel and holder, 2 compressed air tanks and a lashing set) is available.
For use on the TAMIYA Volvo FH16 tractor, the towing hitch with item no .: 907182 is required, the assembly is carried out on the existing frame end crossmember.
Product details:
- 1:14 scale
- Torsionally stiff steel frame in sandwich construction
- Frame made of 3 and 1 mm steel sheet laser cut
and CNC bent
- Turntable made of sheet steel in sandwich construction
- Stored turntable (adjustable) with sliding pad
for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with
Checker plate application
- For easier attachment, the drawbar is attached to two
Tension springs held in the coupling height of 75 mm
- Posts (one piece) milled from solid aluminum material
- Post bracket can be loosened using two grub screws
be repositioned or removed as needed
become.
- Trailer axles with dummy air springs
- Ball-bearing chrome rims with wide tires
- Solid aluminum underride protection (left / right)
- Mudguard splash guard and bumper grille set
- CNC milled aluminum rear bumper
- 7-chamber taillights, license plate holder and
Work lights included
- Decor set
Dim .: LxWxH: 620 x 190 x 305 mm
Weight: 2,600g
- Optional Available: 907623 Accessory set for 2-axle Riedler stanchions
* Official Licensed by Ernst Riedler Fahrzeugbau- und Vertriebs.m.b.H
Attention! Not suitable for children under 14 years.
item code: 907622
2-axle dolly rigid for Gigaliners
incl. 19% VAT
plus Shipping
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers.
- steel frame (laser cut and welded)
- 7 chamber taillights
- 8-way ball-bearing wheels
- Air spring dummies
- Saddle plate made of plastic
- Tiller made of aluminum, adjustable in length and height
Technical specifications:
Length: 365mm
Width: approx. 195mm
Height: about 85mm
item code : 907210
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Reviews
There are no reviews yet.