Goldhofer Heavy-Loader BAU STN-L3
585,00 €
incl. 19% VAT plus Shipping
Goldhofer Heavy-Loader “BAU STN-L3” (with plateau)
Carry it all piggyback …
Fits all Tamiya trucks. These equipment highlights make the set stand out: the divided ramp can be manually folded down for driving operation.
item code: 907060
In stock
Goldhofer Heavy-Loader “BAU STN-L3” (with low loading platform)
Carry it all piggyback …
Fits all Tamiya trucks. The equipment highlights of this model make the set stand out: the divided ramp can be manually folded down for loading operations. · 3 axles with twintyres· suspension with true to original dummy air suspension · ball raced · steel profile · height adjustable trailer supports · 4-chamber tail lights electrically retrofittable · length of the ramp (opened up) 290 mm.
Technical Data:
Length: ca. 1000 mm, Width:ca. 190 mm, Height: ca. 275mm, Weight:ca. 6 Kg
Features:
– steel profile (laser-cut and hard soldered)
– split folding loading ramps 3/4 – 1/2
– 7-chamber taillights
– low loading platform with tailgate
– 3 axles with twin tyres and dummy air springs
– all columns are mechanically adjustable
– kit
| Weight | 7 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Servo bracket set steering axle GH
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
1/14 Steered low loader axle
incl. 19% VAT
plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Alum. cylinder mount
incl. 19% VAT
plus Shipping
Alum. cylinder mount, scale 1/14, suitable for the Goldhofer STN-L3 item code: 907060 and Goldhofer TU4 item code: 907400, is simply replaced by the plastic part, content: 2x cylinder holder, 2x rail, mounting screws, installation instructions
item code: 907476
Attention! Not suitable for children under 14 years.
Related products
3-axle Material trailer 1/16
incl. 19% VAT
plus Shipping
3-axle Material trailer, scale 1/16, kit, unpainted
Product details:
- Torsion-resistant steel frame in sandwich construction (3 and 1 mm steel, laser cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball bearings
- Real wood floor application
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Side walls are locked with neodymium magnets
- All 9 side walls are functional
- 4 hinges per side wall (hinges made of 1 mm sheet steel)
- Side wall posts can be removed
- Aluminium front wall
- Steel underride guard (left/right)
- Single-arm steel spare wheel holder with spare wheel
- 16 lashing eyes
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Loading area 941x167mm
Saddle height 90 - 100mm
Weight 5,500g
Warning! Not suitable for children under 14 years of age.
item code: 251050
3-axle semi-trailer chassis Ver.III
incl. 19% VAT
plus Shipping
3-axle semi-trailer chassis Ver.III, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, laser cut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, ball-bearing chrome rims wide with wide tyres, new axle suspension optionally with lift +8 mm (included), aluminium semi-trailer supports adjustable (manually), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, the kit is supplied unpainted, assembly instructions
Dimensions: length approx. 980 mm, width approx. 190 mm, height approx. 110 mm, weight 3,500 g
Item code: 907730
Attention! Not suitable for children under 14 years.
3-axle trailer
incl. 19% VAT
plus Shipping
3-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1950 had a permissible total weight of 24 tons and was equipped with twin tyres.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-moulded plastic drop sides and is covered with a real wooden floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at coupling height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and number plate holder complete the picture.
Optionally a lighting set is available for the 3-axle trailer art.no. 251006 (not included in the kit).
Technical details:
Total length approx. 635mm, length flatbed approx. 520mm, width approx. 160mm, total height approx. 125mm, weight approx. 1,350g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed.
- Platform gates made of injection moulded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tyres
- Bracket with spare tyres
- Platform with real wood floor
- Rear lights with number plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Attention! Not suitable for children under 14 years.
item code: 251005
2-axle trailer
incl. 19% VAT
plus Shipping
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed
- Drop sides made of injection molded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tires
- Bracket with spare tire
- Platform with real wooden floor
- Tail lights with license plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
Flatbed trailer III made of steel
incl. 19% VAT
plus Shipping
Flatbed trailer III, scale 1/14 Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid aluminum front wall
- Detailed trailer axles with dummy air springs, optionally with a +8mm lift
- Solid steel underride protection (left/right)
- Steel spare wheel holder with spare wheel
- Chrome rims with ball bearings and wide road tires
- 7-chamber taillights and license plate
- holder included 16 lashing eyes
- Real wood floor application
- 8mm aluminum bumper
- detailed assembly instructions + decal sheet
Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g
Item No. 907650
Caution! Not suitable for children under the age of 14.
Goldhofer TU4 flatbed trailer
incl. 19% VAT
plus Shipping
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
2-axle dump truck semi-trailer
incl. 19% VAT
plus Shipping
2-axle dump truck semi-trailer, Tamiya scale, kit, tailgate with automatic 2-hook lock
- Trough and rear wall made of hard PVC, milled
- Air spring dummies
- Aluminum chassis, milled
- 8 times ball-bearing
- 4 semi-trailer rims, wide
- 4 wide tires
- 7-chamber taillights (without bulbs)
- license plate (illuminated)
- Plastic mudguards with holders
- Latch tailgate
- Aluminum underrun protection, milled
- Semi-trailer props, mechanically adjustable
- Pedestal aluminum / plastic
- Hydraulic cylinder dummy
item code : 907312
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Reviews
There are no reviews yet.