Goldhofer TU4 flatbed trailer
695,00 €
incl. 19% VAT plus Shipping
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
In stock
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
Warning! Not suitable for children under 14 years.
| Weight | 7 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Trailer hitch with drawbar
incl. 19% VAT
plus Shipping
Trailer hitch with drawbar, scale 1:14, housing and drawbar made of plastic boosted with fibre glass, mechanics made of steel, it works by hand or with a servo, measure: width 30mm, height 30mm, depth 36mm, fixing plate: width 22mm, height 12mm, depth 7mm, includet: 1 couplingl, 1 drawbarl, fixing screws, instruction
Item code: 907182
Related products
3-axle-semi-trailer chassis 1/16
incl. 19% VAT
plus Shipping
3-axle-semi-trailer chassis, 1/16 scale, kit, unpainted,
Ideal as a base for your own projects and ideas.
Product details:
Rigid steel frame in sandwich construction (3 mm and 1 mm steel, laser-cut)
SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
Aluminium rims with Fulda Multitonn II wide tyres, ball-bearing mounted
Mechanical trailer supports, pre-prepared for electric drive (gear motors not included in the kit)
Steel underrun protection (left/right)
Single-arm steel spare wheel holder with spare wheel
Mud flaps
Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 90 mm
Saddle height 90 – 100 mm
Weight 3,500 g
Warning! Not suitable for children under 14 years of age.
item Code: 251040
3-axle Material trailer 1/16
incl. 19% VAT
plus Shipping
3-axle Material trailer, scale 1/16, kit, unpainted
Product details:
- Torsion-resistant steel frame in sandwich construction (3 and 1 mm steel, laser cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball bearings
- Real wood floor application
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Side walls are locked with neodymium magnets
- All 9 side walls are functional
- 4 hinges per side wall (hinges made of 1 mm sheet steel)
- Side wall posts can be removed
- Aluminium front wall
- Steel underride guard (left/right)
- Single-arm steel spare wheel holder with spare wheel
- 16 lashing eyes
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Loading area 941x167mm
Saddle height 90 - 100mm
Weight 5,500g
Warning! Not suitable for children under 14 years of age.
item code: 251050
Draw Tube extens. Pole Trailer (56310)
incl. 19% VAT
plus Shipping
Draw Tube extens. Pole Trailer, scale 1/14, suitable for Tamiya telescopic semi-trailer (56310), metal kit
Product details:
Euro bumper with 7-chamber rear lights and number plate holder
Aluminium drawbar extension, easy to replace
For transporting goods up to a length of 1200 mm
Warning! Not suitable for children under 14 years of age.
item code: 907733
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
3-axle trailer
incl. 19% VAT
plus Shipping
3-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1950 had a permissible total weight of 24 tons and was equipped with twin tyres.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-moulded plastic drop sides and is covered with a real wooden floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at coupling height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and number plate holder complete the picture.
Optionally a lighting set is available for the 3-axle trailer art.no. 251006 (not included in the kit).
Technical details:
Total length approx. 635mm, length flatbed approx. 520mm, width approx. 160mm, total height approx. 125mm, weight approx. 1,350g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed.
- Platform gates made of injection moulded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tyres
- Bracket with spare tyres
- Platform with real wood floor
- Rear lights with number plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Attention! Not suitable for children under 14 years.
item code: 251005
2-axle dump truck semi-trailer
incl. 19% VAT
plus Shipping
2-axle dump truck semi-trailer, Tamiya scale, kit, tailgate with automatic 2-hook lock
- Trough and rear wall made of hard PVC, milled
- Air spring dummies
- Aluminum chassis, milled
- 8 times ball-bearing
- 4 semi-trailer rims, wide
- 4 wide tires
- 7-chamber taillights (without bulbs)
- license plate (illuminated)
- Plastic mudguards with holders
- Latch tailgate
- Aluminum underrun protection, milled
- Semi-trailer props, mechanically adjustable
- Pedestal aluminum / plastic
- Hydraulic cylinder dummy
item code : 907312
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Reviews
There are no reviews yet.