Goldhofer Heavy-Loader BAU STN-L3
585,00 €
incl. 19% VAT plus Shipping
Goldhofer Heavy-Loader “BAU STN-L3” (with plateau)
Carry it all piggyback …
Fits all Tamiya trucks. These equipment highlights make the set stand out: the divided ramp can be manually folded down for driving operation.
item code: 907060
In stock
Goldhofer Heavy-Loader “BAU STN-L3” (with low loading platform)
Carry it all piggyback …
Fits all Tamiya trucks. The equipment highlights of this model make the set stand out: the divided ramp can be manually folded down for loading operations. · 3 axles with twintyres· suspension with true to original dummy air suspension · ball raced · steel profile · height adjustable trailer supports · 4-chamber tail lights electrically retrofittable · length of the ramp (opened up) 290 mm.
Technical Data:
Length: ca. 1000 mm, Width:ca. 190 mm, Height: ca. 275mm, Weight:ca. 6 Kg
Features:
– steel profile (laser-cut and hard soldered)
– split folding loading ramps 3/4 – 1/2
– 7-chamber taillights
– low loading platform with tailgate
– 3 axles with twin tyres and dummy air springs
– all columns are mechanically adjustable
– kit
| Weight | 7 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Servo bracket set steering axle GH
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
1/14 Steered low loader axle
incl. 19% VAT
plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Alum. cylinder mount
incl. 19% VAT
plus Shipping
Alum. cylinder mount, scale 1/14, suitable for the Goldhofer STN-L3 item code: 907060 and Goldhofer TU4 item code: 907400, is simply replaced by the plastic part, content: 2x cylinder holder, 2x rail, mounting screws, installation instructions
item code: 907476
Attention! Not suitable for children under 14 years.
Related products
Draw Tube extens. Pole Trailer (56310)
incl. 19% VAT
plus Shipping
Draw Tube extens. Pole Trailer, scale 1/14, suitable for Tamiya telescopic semi-trailer (56310), metal kit
Product details:
Euro bumper with 7-chamber rear lights and number plate holder
Aluminium drawbar extension, easy to replace
For transporting goods up to a length of 1200 mm
Warning! Not suitable for children under 14 years of age.
item code: 907733
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
3-axle box trailer Ver.III white
incl. 19% VAT
plus Shipping
3-axle box trailer Ver.III white, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, lasercut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, wide chrome rims with ball bearings and wide tyres, new axle suspension optionally with height adjustment +8 mm (included), aluminium trailer supports adjustable (manual), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, aluminium box body with plastic side panels in sandwich look (screwed together), aluminium door hinges (270° opening angle), loading door locking with magnets, the kit is supplied unpainted, assembly instructions, decal sheet
Dimensions: length approx. 980 mm, width approx. 195 mm, height approx. 300 mm, weight 7,400 g
item code: 907792
Caution! Not suitable for children under 14 years.
Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
Flatbed trailer III made of steel
incl. 19% VAT
plus Shipping
Flatbed trailer III, scale 1/14 Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid aluminum front wall
- Detailed trailer axles with dummy air springs, optionally with a +8mm lift
- Solid steel underride protection (left/right)
- Steel spare wheel holder with spare wheel
- Chrome rims with ball bearings and wide road tires
- 7-chamber taillights and license plate
- holder included 16 lashing eyes
- Real wood floor application
- 8mm aluminum bumper
- detailed assembly instructions + decal sheet
Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g
Item No. 907650
Caution! Not suitable for children under the age of 14.
2-axle dump truck semi-trailer
incl. 19% VAT
plus Shipping
2-axle dump truck semi-trailer, Tamiya scale, kit, tailgate with automatic 2-hook lock
- Trough and rear wall made of hard PVC, milled
- Air spring dummies
- Aluminum chassis, milled
- 8 times ball-bearing
- 4 semi-trailer rims, wide
- 4 wide tires
- 7-chamber taillights (without bulbs)
- license plate (illuminated)
- Plastic mudguards with holders
- Latch tailgate
- Aluminum underrun protection, milled
- Semi-trailer props, mechanically adjustable
- Pedestal aluminum / plastic
- Hydraulic cylinder dummy
item code : 907312
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Reviews
There are no reviews yet.