1/14 Aluminum rim small long hole AG front axle
Aluminum rim small AG front axle, scale 1/14
• Small version
• Aluminum rims in 10-slot Euro Design
• Suitable to all wide tires in Tamiya scale
• Carrier 12 mm hexagon
• DimensionsØxB: 49 x 21 mm
• Weight approx. 57 g / piece
• Incl. 20 ornamental screws and 2 hub caps
• Delivery 2 pieces
item code: 907411
Warning! Not suitable for children under 14 years.
1/14 aluminum rim wide long hole AG front axle
Aaluminum rim wide long hole AG front axle, scale 1/14
• Wide version
• Aluminum rims in 10-slot Euro Design
• Suitable to all wide tires in Tamiya scale
• Carrier 12 mm hexagon
• DimensionsØxB: 49 x 28 mm
• Weight approx. 65 g / piece
• Incl. 20 ornamental screws and 2 hub caps
• Delivery 2 pieces
item code: 907412
Warning! Not suitable for children under 14 years.
Cab lock MB Arocs,
Top light holder MB Arocs
Top light holder MB Arocs, scale 1/14, suitable for the Arocs of Tamiya, plastic top light holder, headlight housing in black, four holders for the additional mounting of worklights (item code: 907144 and 907578), Contents: 1 Top light holder, 4 headlamp housing , 4 clear glasses, 4 blue glasses, 4 holders, mounting material and instructions (delivery without bulbs)
item code: 907599
Warning! Not suitable for children under 14 years.
Tank bracket set
Tank bracket set, suitable for the 3-axle Arocs (not suitable for the new tipper) and Actros from Tamiya, for attaching the tanks to the frame when the original battery compartment is removed. Contents: 2 aluminum brackets, mounting screws, instructions
item no: 907584
Warning! Not suitable for children under 14 years.
Truck antenna set universal
Trailer support set small
Trailer support set small, scale 1/14, housing made of aluminum, steel stamp with clamping screw, aluminum base, fixing screws. Dim. : Housing 10x10x34,5mm with 2 mounting holes M3, punch 5 Ø x 32mm, foot 19 Ø x 3,5mm, total length retracted: 38mm, extended 63mm, content: 2 housings, 2 punches, 2 feet, 2 clamping screws and four fixing screws M3x6
item code: 907589
Warning! Not suitable for children under 14 years.
Trailer door hinge
Alu rear wheel round hole
Alu rear wheel round hole, scale 1/14, round hole, aluminum wheel hubs with hexagon socket, aluminum cover, capsscrews chrom, set for one axle, fits all Tamiya 2 and 3 axles, content: 4 aluminum rims, 2 wheel hubs with hexagon socket, 2 alu cover with 0-ring, 20 capscrews chrome, manual
item code : 907160
Alu front wheel wide round hole
Alu – flat bed twin rim
1/14 Installation set AG front axle
1/14 Installation set AG front axle
This set contains all components to mount the front axle part no. 907267 to the TAMIYA frame.
Scope of delivery:
2 stainless steel leaf spring sets
Mounting material
Steering servo mount (steel)
Steering linkage.
Caution! Not suitable for children under the age of 14.
item code: 907280
1/14 Alloy rim wide AG front axle
1/14 Alloy rim wide AG front axle
-Design wide
-Aluminum rims in 10-hole Euro design
-Suitable for all wide tires in Tamiya scale
-Driver 12 mm hexagon
-Dimensions DMxW: 49 x 28 mm
-Weight approx. 65 g / piece
-Incl. 20 decorative screws and 2 hub caps
-Scope of delivery 2 pieces
Caution! Not suitable for children under the age of 14.
item code: 907278
1/14 Alloy 2-speed transfer case with speed compensation
1/14 Alloy 2-speed transfer case with speed compensation and self-locking longitudinal differential.
The 2-speed transfer case is designed for use in TAMIYA 2- and 3-axle chassis in conjunction with the 2-speed manual transmission Compact. It offers you the possibility to convert or upgrade your model to all-wheel drive. It impresses with its simple installation, as existing bores/threads are used here. The transfer case offers two additional shiftable gears and a self-locking longitudinal differential that compensates for the difference in speed between the front and rear axles and, in the event of a loss of traction, activates the differential lock independently/automatically and ensures 100% traction.
Note: By using the 2-speed transfer case, the battery mount must be removed and the 7.2 V drive battery must be placed in the cab.
Transfer case for driving one or more driven front and rear axles
2-speed shiftable (1st gear 3:1 / 2nd gear 1:1)
7-fold ball bearing
CNC milled aluminum housing
Hardened steel gears
5 mm gear/output shaft
The gears are shifted by a micro-servo
Built-in longitudinal differential for speed compensation between front and rear axles
Easy mounting by using existing holes (4 screws) on the TAMIYA ladder frame
Dimensions distributor LxWxH: 32 x 62 x 40 mm
Weight approx. 120 g.
Caution! Not suitable for children under the age of 14.
item code: 907266
1/14 Alloy 2-Speed Manual Transmission Compact
1/14 Alloy 2-Speed Manual Transmission Compact
This compact 2-speed transmission is designed for use in TAMIYA 2- and 3-axle chassis in conjunction with the 2-speed transfer case. It offers you the possibility to convert or upgrade your model to all-wheel drive. It impresses with its simple installation, as existing bores/threads are used here. The small design allows the installation of the driven front axle (500907267 - front axle installation kit 500907280 is required.) .
Compact 2-speed manual transmission
2-speed: gear ratio 1:11.3 (1st gear) and 1:5.666 (2nd gear)
5-fold ball bearing
CNC machined aluminum housing
Hardened steel gears
Incl. aluminum motor mount for 540 motors (suitable for CARSON and TAMIYA standard and truck motors)
Incl. motor pinion (3,17mm) and mounting material
Easy mounting by using existing holes (2 screws) on the ladder frame
5 mm gearbox/output shaft
The gears are shifted by a micro-servo
Dimension gearbox (o. motor) LxWxH: 47 x 62 x 35 mm
Weight (without motor) approx. 165 g.
Switching servo and 540 motor are not included.
Caution! Not suitable for children under the age of 14.
item code: 907265
1/14 driven front axle with self-locking differential
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
1/14 Rear axle w/Diff.-Lock&fixed drive
1/14 Rear axle w/Diff.-Lock&fixed drive
Official licensed by ZF Friedrichshafen AG.
The CARSON drive concept for TAMIYA trucks in 1:14 scale
Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A huge advantage of these axles is that there is no need for additional space for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically when there is a traction loss. Officially licensed by ZF Friedrichshafen AG.
- Detailed rear axle
- Reinforced plastic axle housing
- High ground clearance thanks to a slim? Differential housing (height 33 mm)
- 12-way ball bearing
- Hardened steel bevel gears
- axle ratio 1: 2,66
- 5 mm transmission / input shaft
- Aluminum rim driver 12 mm hexagon
- Easy conversion to the axle with and without drive (both shafts and housing covers are included in the axle kit)
- Dimensions rear axle LxBxH: 44 x 135 x 33 mm
- Weight approx. 150 g
- Delivered as kit with pre-assembled differential
- Suitable for TAMIYA suspension and independent suspension
- Suitable for all TAMIYA and CARSON truck rims with 12 mm hexagonal driver
- Self-locking differential (shifter servo, linkages and Bowden cables are not required)
item code 907268
Wheel axle – set
Heavy duty coupling
Trailer Coupling SAF
Locking cabin
Spare wheel holder 1-armed
Wooden board set
Alu – pallet box
Alu - pallet box, scale 1/14, model kit flaps to open, with 6 Euro plastic pallets, dim .: length 180mm, width 190mm, height 70mm, suitable for a frame width of 96mm, suitable for semi-trailers from Carson, Contents: 1 set of milled aluminum, mounting screws, 6 plastic pallets, building instructions
item code : 907379
Truck fanfare set
electrical support legs set
electrical support legs set, 1:14 scale, housing made of aluminum, steel punch with clamping screw, aluminum base, fixing screws. Dim. : Housing 15x15x73mm with 2 mounting holes M3, stamp 8 diameter x 62mm, retracted foot 19 dia x 3.5mm, total length: 76.5, extended 114mm, Contents: 2 Housing, 2 punch, 2 feet, 2 clamp screws and four mounting screws M3x6
item code : 907218
Gearmotor e-Support
Spindle drive for Fliegl Stone Master
Spindle drive for Fliegl Stone Master, the toggle pin "Z bar" for the motorized drive of the trough gives the CARSON 3-axle dump trucks Fliegl Stone Master (Item code 907216) a more prototypical function. For Operating a geared motor No. 907166 required.
Technical specifications: Material aluminum with steel bolts / shafts
item code : 907217
Fender semi-circular, plastic
Ramp-Set Goldhofer
Ramp-Set Goldhofer, scale 1/14, ramp 3/4 - 1/2, steel, Folding and sliding, wooden pad, cylinder dummy's function, with support rods and attachments, dim. Ramp length 290mm, ramp width 47mm, overall height 220mm, capacity: 2 ramps long, 2 short ramps, 4 wooden support pads, 2 bars, 4 cylinder dummy's, 2 mounting brackets, rope and redirection, hinges, mounting hardware, instructions
Item code : 907376
Pole for Trailer hitch
Frame access cover fourwheeler
Frame access cover fourwheeler, scale 1/14, from VA-chequered plate lasered and formed, drill holes for MFC are designed and can be taken out if you need, suitable for the Volvo, Scania, MAN and MB fom Tamiya, measure: length 295mm, width 180mm, thickness 0,8mm, weight 220g, included: 1 access cover, 6 screws from VA
Item code: 907180
Flat Bed Twin Rim Chrome
Splash guard – set
Underrun protection
Trailer hitch with drawbar
Trailer hitch with drawbar, scale 1:14, housing and drawbar made of plastic boosted with fibre glass, mechanics made of steel, it works by hand or with a servo, measure: width 30mm, height 30mm, depth 36mm, fixing plate: width 22mm, height 12mm, depth 7mm, includet: 1 couplingl, 1 drawbarl, fixing screws, instruction
Item code: 907182