Showing 1–12 of 19 results

3-chamber tail light with lighting board

80,99 
3-chamber tail light with lighting board, scale 1/14, for 7,2 Volt, for 12 Volt use supplied diode, light functions: Rear light, brake light and turn signal, black perforated mask for LED - effect, cable length approx. 550mm, Ø of housing 11mm, height 7,5mm, fixing screw centered M2, content: 2 prefabricated housings with light inserts, circuit board and cable, 2x red glasses, 2x orange glasses, 2x perforated mask self-adhesive, 2x fixing screw, 1 diode at 12 Volt operating voltage item code: 907679 Attention : Not suitable for the MFC from Tamiya Attention. Not suitable for children under 14 years.  

6-chamber tail light with lighting board 7.2 volt

59,90 
6-chamber tail light with lighting board 7.2 volt, ready-made, suitable for the scale 1/16 – 1 / 14.5, with plastic inserts for better illumination of the individual chambers, equipped with SMD LEDs, common positive pole, 5 light functions: turn signal, brake light, Driving light + position light, reversing lamp and fog lamp, cable length approx. 60cm, dim .: LxWxH: 38x11x6,5mm, content: 1 tail light left, 1 tail light right, 4 fixing screws M2x6, instructions item code: 191531 Warning! Not suitable for children under 14 years

6-chamber tail light with lighting board 12 volt

59,90 
6-chamber tail light with lighting board 12 volt, ready-made, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, equipped with SMD LEDs, common positive pole, 5 light functions: turn signal, brake light, Driving light + position light, reversing lamp and fog lamp, cable length approx. 60cm, dim .: LxWxH: 38x11x6,5mm, content: 1 tail light left, 1 tail light right, 4 fixing screws M2x6, instructions item code: 191532 Warning! Not suitable for children under 14 years

7-chamber tail light with lighting board 12 volts

59,90 
7-chamber tail light with lighting board 12 volts, ready assembled, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive pole, 4 light functions: turn signals, Taillight, brake light and reversing light, cable length approx. 60cm, dim .: LxWxH: 32x12x7mm, content: 1 tail light left, 1 tail light right, 4 fastening screws M2x6, instructions item code: 191537 Warning! Not suitable for children under 14 years

7-chamber tail light with lighting board 7.2 volts

59,90 
7-chamber tail light with lighting board 7.2 volts, ready assembled, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive pole, 4 light functions: turn signals, Taillight, brake light and reversing light, cable length approx. 60cm, dim .: LxWxH: 32x12x7mm, content: 1 tail light left, 1 tail light right, 4 fastening screws M2x6, instructions item code: 191536 Warning! Not suitable for children under 14 years

SIGNAL LIGHT ROUND

5,59 
Signal light round, scale 1/14, the housing is from aluminum, the glass is to clip on, it can be lighted with a bulb, measure: diameter ca. 11,5mm, height ca. 6mm, included: 1 piece Item code : 907577

6 – CHAMBER – TAIL LAMPS

19,49 
6 - chamber - tail lamps, scale 1:14, for truck`s, measure: total length 38mm, length glass 27mm, width 11mm, height 6,5mm, included: 2 housings reflecting inside, 2 red and 2 white glasses Item code : 907038

3 – CHAMBER – TAIL LAMPS

19,49 
3 - chamber - tail lamps, scale 1/14, diameter ca. 11mm, height ca.6mm, included: 2 housings from aluminum with 3 chambers ( can be lighted ), 2 red and 2 yellow glasses Item code : 907039

7 – CHAMBER – TAIL LAMPS

19,49 
7 - chamber - tail lamps, scale 1/14, measure: length 32mm, width 12mm, height 7mm, included: 2 housings reflecting inside, 2 red and 4 white glasses for signal and back light, to fix it with 2 scrwes M2x6 from behind, Quantity: 1 Set Item code : 907037

3 + 1-chamber rear light

13,20 
3 + 1-chamber rear lightfor the 1/16 scale - 1/14, set of two 3-chamber and two 1-chamber lights, suitable for 3mm LED, dim .: 3-chamber: LxWxH 25x10x11mm, 1-chamber LxWxH9x10x11mm, Contents: 4 housing4 red, 2 orange, 2 clear glasses item code : 220986

REVERING LIGHT, ROUND

7,60 
Revering light, round, scale 1/16 to 1/14.5, the housing is from aluminium, the glass is to clip on, can be illuminated with a bulb Item code : 207041

3-CHAMBER TAIL LAMP 1:16

14,20 
3-chamber tail lamp, for scale 1:16, plastic, with holder for the lamps and the number plate, 2 housings with 2 red and 2 orange glasses, (it can not glow) diameter ca. 9mm, height ca. 4mm, length holder ca. 40mm, 2 piece at a Set Item code 2311