2-speed manual gearbox
219,00 € 197,10 €
incl. 19% VAT plus Shipping
2-speed manual gearbox, for 1/8 scale, very powerful, designed for brushless motor item no. 220355, suitable only for planetary shafts, total reduction ratio 1st gear 20:1, 2nd gear 10:1, flanged planetary stage with a reduction ratio of 10:1, for 5mm motor shafts, shifting via servo is possible whilst driving, housing and carrier milled from aluminium, output shaft SW5, 3-ball bearing, shafts and gears hardened, input speed max. 12,000 rpm, shift rod and mounting hardware included, Contents: 1 gearbox with planetary stage, mounting parts
Warning! Not suitable for children under 14 years of age.
item code: 220350
In stock
2-speed manual gearbox, for 1/8 scale, very powerful, designed for brushless motor item no. 220355, suitable only for planetary shafts, total reduction ratio 1st gear 20:1, 2nd gear 10:1, flanged planetary stage with a reduction ratio of 10:1, for 5mm motor shafts, shifting via servo is possible whilst driving, housing and carrier milled from aluminium, output shaft SW5, 3-ball bearing, shafts and gears hardened, input speed max. 12,000 rpm, shift rod and mounting hardware included, Contents: 1 gearbox with planetary stage, mounting parts
Warning! Not suitable for children under 14 years of age.
| Dimensions | 15 × 10 × 10 cm |
|---|
You must be logged in to post a review.
You may also like…
Roxxy brushless motor
incl. 19% VAT
plus Shipping
Roxxy brushless motor, for 1/8 scale, compatible with the 2-speed manual gearbox (item no. 220350), with an adapter plate for easy mounting on the gearbox, 1,100 rpm per volt, motor shaft 5 mm, motor power 680 watts, operating voltage 12 volts, milled aluminium adapter plate, contents: 1 brushless motor, 1x adapter plate, mounting hardware, instructions
Warning! Not suitable for children under 14 years of age.
item code: 220355
Related products
Half-round mudguard set
incl. 19% VAT
plus Shipping
Half-round mudguard set, scale 1/16, made of plastic, for trailers with single tires, dimensions: length 88mm, width 31mm, height 43mm, mounting hole spacing 55.5mm, steel retaining rods with M3 thread, for frame widths of 84mm, contents: 2 mudguards, 4 steel retaining rods, 1 instruction manual
Attention! Not suitable for children under 14 years of age.
item code: 220963
Low loader wheel hub
incl. 19% VAT
plus Shipping
Low loader wheel hub, scale 1/8, wheel hub and hub cap turned from aluminum, 10 threaded holes M3, 2x ball bearing seat 13 Ø, hub cap removable, brake drum indicated, dimensions: total length 55mm, Ø drum 45mm, Ø hub 22mm, bolt circle 28mm, contents: 1x wheel hub, 1x hub cap, 1x O-ring
Attention! Not suitable for children under 14 years.
item code: 220935
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
3-speed gearbox with transfer case and self-locking differential
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
item code: 251106
Warning! Not suitable for children under 14 years.
1/14 Alloy 2-Speed Manual Transmission Compact
incl. 19% VAT
plus Shipping
1/14 Alloy 2-Speed Manual Transmission Compact
This compact 2-speed transmission is designed for use in TAMIYA 2- and 3-axle chassis in conjunction with the 2-speed transfer case. It offers you the possibility to convert or upgrade your model to all-wheel drive. It impresses with its simple installation, as existing bores/threads are used here. The small design allows the installation of the driven front axle (500907267 - front axle installation kit 500907280 is required.) .
Compact 2-speed manual transmission
2-speed: gear ratio 1:11.3 (1st gear) and 1:5.666 (2nd gear)
5-fold ball bearing
CNC machined aluminum housing
Hardened steel gears
Incl. aluminum motor mount for 540 motors (suitable for CARSON and TAMIYA standard and truck motors)
Incl. motor pinion (3,17mm) and mounting material
Easy mounting by using existing holes (2 screws) on the ladder frame
5 mm gearbox/output shaft
The gears are shifted by a micro-servo
Dimension gearbox (o. motor) LxWxH: 47 x 62 x 35 mm
Weight (without motor) approx. 165 g.
Switching servo and 540 motor are not included.
Caution! Not suitable for children under the age of 14.
item code: 907265
Transfercase for 4-wheel drive
incl. 19% VAT
plus Shipping
Transfercase for 4-wheel drive, support set, the front axle can be connect with a servo, the output shaft have a diameter from 5mm and be feature with 4 ball bearings, speed reduction 2:1, this set is suitable for the 3-gear with item code 251100, instruction and fixing parts are included
Item code 251180
Reviews
There are no reviews yet.