Roxxy brushless motor
75,90 €
incl. 19% VAT plus Shipping
Roxxy brushless motor, for 1/8 scale, compatible with the 2-speed manual gearbox (item no. 220350), with an adapter plate for easy mounting on the gearbox, 1,100 rpm per volt, motor shaft 5 mm, motor power 680 watts, operating voltage 12 volts, milled aluminium adapter plate, contents: 1 brushless motor, 1x adapter plate, mounting hardware, instructions
Warning! Not suitable for children under 14 years of age.
item code: 220355
In stock
Roxxy brushless motor, for 1/8 scale, compatible with the 2-speed manual gearbox (item no. 220350), with an adapter plate for easy mounting on the gearbox, 1,100 rpm per volt, motor shaft 5 mm, motor power 680 watts, operating voltage 12 volts, milled aluminium adapter plate, contents: 1 brushless motor, 1x adapter plate, mounting hardware, instructions
Warning! Not suitable for children under 14 years of age.
You must be logged in to post a review.
You may also like…
2-speed manual gearbox
incl. 19% VAT
plus Shipping
2-speed manual gearbox, for 1/8 scale, very powerful, designed for brushless motor item no. 220355, suitable only for planetary shafts, total reduction ratio 1st gear 20:1, 2nd gear 10:1, flanged planetary stage with a reduction ratio of 10:1, for 5mm motor shafts, shifting via servo is possible whilst driving, housing and carrier milled from aluminium, output shaft SW5, 3-ball bearing, shafts and gears hardened, input speed max. 12,000 rpm, shift rod and mounting hardware included, Contents: 1 gearbox with planetary stage, mounting parts
Warning! Not suitable for children under 14 years of age.
item code: 220350
Related products
Gear motor for low bed low loader
incl. 19% VAT
plus Shipping
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
item code : 907703
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
Scania SLT8x4 warning bar/strobo set
incl. 19% VAT
plus Shipping
Scania SLT8x4 warning bar/strobo set, suitable for the Scania SLT8x4 from Tamiya, for 7.2 or 12 volt, warning bar SMD LED circuit board with 40 SMD LEDs, 2 rotating beacons
with strobe function, contents: 1 warning bar circuit board, 2 rotating beacon inserts, installation instructions
Suitable electronics: 907685 Universal light module LBS (not included)
Attention : Not suitable for the MFC
Caution! Not suitable for children under 14 years of age.
item code: 907697
1/16 Steered low-loader axle
incl. 19% VAT
plus Shipping
Steered low-loader axle, scale 1/16, very sturdy design, axle parts made of hardened steel, aluminum linkages, steering heads with plain bearings, wheel studs Ø 5mm, track width adjustable between 163 and 165mm, steering angle up to a maximum of 45° possible, steering rod for connecting additional steel axles with M3 ball joints, two different hole patterns for adapting the leaf springs to the frame width, weight approx. 110g, total length: 142.5mm, height: 18.5mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 251225
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
1/14 Alloy 2-Speed Manual Transmission Compact
incl. 19% VAT
plus Shipping
1/14 Alloy 2-Speed Manual Transmission Compact
This compact 2-speed transmission is designed for use in TAMIYA 2- and 3-axle chassis in conjunction with the 2-speed transfer case. It offers you the possibility to convert or upgrade your model to all-wheel drive. It impresses with its simple installation, as existing bores/threads are used here. The small design allows the installation of the driven front axle (500907267 - front axle installation kit 500907280 is required.) .
Compact 2-speed manual transmission
2-speed: gear ratio 1:11.3 (1st gear) and 1:5.666 (2nd gear)
5-fold ball bearing
CNC machined aluminum housing
Hardened steel gears
Incl. aluminum motor mount for 540 motors (suitable for CARSON and TAMIYA standard and truck motors)
Incl. motor pinion (3,17mm) and mounting material
Easy mounting by using existing holes (2 screws) on the ladder frame
5 mm gearbox/output shaft
The gears are shifted by a micro-servo
Dimension gearbox (o. motor) LxWxH: 47 x 62 x 35 mm
Weight (without motor) approx. 165 g.
Switching servo and 540 motor are not included.
Caution! Not suitable for children under the age of 14.
item code: 907265
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.