Cardan Shaft 135-165mm 6/5mm
Cardan Shaft 115-145mm 6/5mm
Cardan Shaft 95-125mm 6/5mm
Cardan Shaft 73-101mm 6/5mm
Cardan Shaft 60-75mm 6/5mm
Cardan Shaft 52-62mm 6/5mm
Cardan Shaft 48-54mm 6/5mm
Cardan Shaft 45-50mm 6/5mm
VOLVO FH16 REAR LIGHT
Volvo FH16 rear light, scale 1/14, suitable for the Volvo FH16 from Tamiya, from 7.2 to 12 volts, true-to-original light functions and look of the rear lights with the following functions: brake light, reversing light, fog light, parking light, indicator l + r, cable length approx 75cm, content: 1 set of housings with built-in circuit board
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907508
Volvo FH16 headlight insert with daytime running lights
Volvo FH16 headlight insert with daytime running lights, scale 1/14, suitable for Tamiya FH16, from 7.2 to 14 volts, reflector with circuit board and daytime running lights "V", light functions: daytime running lights (burns with 100% brightness), low beam (brightness of daytime running lights reduced automatically to 25%), turn signals l + r, fog lights, high beam, cornering lights, cover caps, cable length approx. 25 cm, fastening material, installation instructions, content: 1 set of reflector with circuit board l + r, 1 set of cover caps, fastening material
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907507
1/14 Tire insert 20mm
Tire insert 20mm, scale 1/14, suitable for the tires 907012, 907612 and the original Tamiya tires in a wide version, made of cellular rubber (medium strength), this keeps the truck tire in shape and gives additional stability. Depending on the load, the better walking behavior on road and off-road courses is noticeable through higher traction. Can be used for all TAMIYA tractors, semitrailers and trailers with wide tires. Contents: 2 tire inserts 20mm
Attention! Not suitable for children under 14 years.
1/14 Tire insert 15mm
Tire insert 15mm, scale 1/14, suitable for the tires 907011, 907014 and for the original Tamiya tires in a narrow design, made of cellular rubber (medium strength), this keeps the truck tire in shape and gives additional stability. Depending on the load, the better walking behavior on road and off-road courses is noticeable through higher traction. Can be used for all TAMIYA tractors, semitrailers and trailers with narrow tires. Contents: 2 tire inserts 15mm
Attention! Not suitable for children under 14 years.
item code: 907516
Fittingset for 2-axle stanchion trailer
Fittingset for 2-axle stanchion trailer
This optional accessory set is available to refine the 2-axle stanchion trailer.
The scope of delivery includes: a spare wheel (wide chrome rim with wide tires), aluminum spare wheel holder, 2 aluminum compressed air tanks (made of solid aluminum) and a lashing kit.
If you need additional lashing sets for your transport project / load securing, these are listed under item no. 907450 sold separately.
Attention! Not suitable for children under 14 years.
item code: 907623
2-axle stanchion-trailer Riedler
2-axle stake trailer Riedler
The 2-axle stanchion trailer from "Riedler Fahrzeugbau" reflects its attractive workmanship and appearance as in the original as well as in the model and makes the trailer an unmistakable companion on real roads, as well as in the model on the course.
In conjunction with the TAMIYA Volvo FH16 timber transporter, this articulated train becomes a workhorse and is in no way inferior to the original. The massive frame made of sheet steel in connection with the aluminum stake allow a payload of approx. 5,500g. So that the different lengths of wood also lie optimally on the stanchions, they can be moved and freely positioned on the chassis frame.
To refine the 2-axle stake trailer, an optional set (item no .: 907623, with spare wheel and holder, 2 compressed air tanks and a lashing set) is available.
For use on the TAMIYA Volvo FH16 tractor, the towing hitch with item no .: 907182 is required, the assembly is carried out on the existing frame end crossmember.
Product details:
- 1:14 scale
- Torsionally stiff steel frame in sandwich construction
- Frame made of 3 and 1 mm steel sheet laser cut
and CNC bent
- Turntable made of sheet steel in sandwich construction
- Stored turntable (adjustable) with sliding pad
for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with
Checker plate application
- For easier attachment, the drawbar is attached to two
Tension springs held in the coupling height of 75 mm
- Posts (one piece) milled from solid aluminum material
- Post bracket can be loosened using two grub screws
be repositioned or removed as needed
become.
- Trailer axles with dummy air springs
- Ball-bearing chrome rims with wide tires
- Solid aluminum underride protection (left / right)
- Mudguard splash guard and bumper grille set
- CNC milled aluminum rear bumper
- 7-chamber taillights, license plate holder and
Work lights included
- Decor set
Dim .: LxWxH: 620 x 190 x 305 mm
Weight: 2,600g
- Optional Available: 907623 Accessory set for 2-axle Riedler stanchions
* Official Licensed by Ernst Riedler Fahrzeugbau- und Vertriebs.m.b.H
Attention! Not suitable for children under 14 years.
item code: 907622
3-Axle Heavy Low Loader
3-Axle Heavy Low Loader
A successful addition to the various TAMIYA tractors. The ramp can be folded down by hand to drive on.
The kit impresses with the following features:
CNC machined aluminum frame plus king pin
• Height adjustable trailer supports
• 3 axles with twin tires suspended from leaf springs
• ball bearing
• 4-chamber rear lights can be electrically retrofitted.
Suitable for all TAMIYA tractors.
The ramp can be folded down by hand to drive on.
The trailer is equipped with three axles with twin tires. The chassis is suspended with leaf springs. The CNC machined frame is made of aluminum. All supports are mechanically adjustable. The 4-chamber taillights can be electrically retrofitted.
Length: ca. 990 mm, Width:ca. 190 mm, Height: ca. 135mm, Weight:ca .4,5 kg
Attention! Not suitable for children under 14 years.
item code: 907000
Mudguard set low loader
Mudguard set low loader, scale 1/14, consisting of 4 black plastic mudguards, handrail made of steel M3, suitable for the Goldhofer TU4 item code: 907400 or for self-built, dimensions: width 34.5mm, height 36mm, content: 4x mudguard, 4x handrail, instructions
item code: 907451
Attention! Not suitable for children under 14 years
Aluminium Front Rim small round hole
Aluminium Front Rim small long hole
Volvo FH 16 Propeller shaft set 6×6
Universal tie-down-set lowloader
Universal tie-down-set lowloader, scale 1/14, consisting of 25cm steel chain with 2 hooks made of aluminum, 5x lugs made of steel with M3 thread, suitable for the Goldhofer TU4 item code: 907400 and every other low loader, content: 1x chain, 2x hooks, 5x lugs, 7x stainless steel rings, instructions
item code: 907450
Attention! Not suitable for children under 14 years.
Alum. stow case for wood plank
Alum. stow case for wood plank, storage compartment with wooden boards, scale 1/14, for transporting excess vehicle widths, only suitable for the Goldhofer TU4 item code: 907400, storage compartment made of aluminum, 12x wooden boards to lay on, contents: 1x storage compartment, 12x wooden boards, mounting hardware, instructions.
item code: 907449
Attention! Not suitable for children under 14 years.
Lifting suspension kit + 8mm 2-axle truck
Lifting suspension kit + 8mm 2-axle truck, 1/14 scale, suitable for all Tamiya 2-axle trucks, made of aluminum, with shock absorber extensions, the vehicle is optically higher, a greater ground clearance and better off-road capability of the model is not achieved, Content: 2 bucks at the back, 2 fastenings at the front + 4 brackets, 4 shock absorbers extensions, fixing material, instructions
item code: 907452
Attention! Not suitable for children under 14 years.
Volvo FH16 Alum. fuel tank mount
Volvo FH16 Alum. fuel tank mount, scale 1/14, suitable for the Tamiya Volvo FH16, made of aluminum, is required for the removal of the original battery compartment, contents: 1x left and 1x right aluminum holder, mounting screws, instructions
item code: 907491
Attention! Not suitable for children under 14 years.
Alu warning sign
Alu warning sign, scale 1/14, with decals, suitable for the Goldhofer STN-L3 907060 and Goldhofer TU4 Art.No. 907400 or for any other low loader, consisting of a right and left aluminum holder with decals, content: 1x left and 1x right aluminum holder, decals, mounting screws, instructions
item code: 907448
Attention! Not suitable for children under 14 years.
Alum. cylinder mount
Alum. cylinder mount, scale 1/14, suitable for the Goldhofer STN-L3 item code: 907060 and Goldhofer TU4 item code: 907400, is simply replaced by the plastic part, content: 2x cylinder holder, 2x rail, mounting screws, installation instructions
item code: 907476
Attention! Not suitable for children under 14 years.
Alu ramp hinge
Volvo FH16 front winker
Volvo FH16 front winker, 1/14 scale, from 6.6 to 15 volts, suitable for the Volvo FH16 from Tamiya, as in the original the indicator lights backwards, consisting of a plastic housing with built-SMD, is installed in the existing luminaire housing, cable length approx. 25cm, Contents: 1 left and 1 right case, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907506
Attention! Not suitable for children under 14 years.
Volvo FH16 position lights set
Volvo FH16 position lights set, scale 1/14, from 6.6 to 15 volts, suitable for the Volvo FH16 from Tamiya, consisting of 6 pieces of orange 3mm LED's for the side position light, kabellength about 65cm, 2 lighting boards for installation in the roof , with parking light / high beam + with 2 each white 3mm LED's for the headlights - roof lamp bracket, colored stranded cable with a length of about 45cm, content: 1 left and 1 right lighting board, 6x orange LEDs, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907494
Attention! Not suitable for children under 14 years.
Volvo FH16 LED-PCB taillight
Volvo FH16 LED-PCB taillight, 1/14 scale, from 6.6 to 15 volts, fits the Volvo FH16 from Tamiya, with metal tail light mask (for a true to the original look) 5 light functions: turn signal right / left, kombie effect brake light / tail light , Reversing spotlight and fog light, colored stranded cable with a length of approx. 80cm, contents: 1 left and 1 right lighting board, 2x rear light mask, mounting material, installation instructions
Attention: Not suitable for the MFC of Tamiya
Volvo FH16 headlight board
Volvo FH16 headlight board, scale 1/14, from 6.6 to 15 volts, suitable for the Volvo FH16 from Tamiya, 6 light functions: turn signal right / left, parking light (attention without daytime running lights), low beam, high beam, cornering and fog lights, colored Litz cable with a length of approx. 25cm, contents: 1 left and 1 right lighting board, mounting material, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907492
Attention! Not suitable for children under 14 years.