Alum. mount (2) Tipper Fitting
Alum. mount (2) Tipper Fitting, Scale 1/14, suitable for the Tamiya Arocs tipper, if the original battery compartment is removed, these holders are needed to attach the tank and exhaust. Content: 2 brackets (1x left and 1x right side), mounting screws, instructions
item code: 907615
Warning! Not suitable for children under 14 years
Speed-up spindl.dri. shaft f. 56545
Speed-up spindl.dri. shaft f. 56545, 1/14 scale, fits Tamiya Spindle Drive Set 56545 (Arocs Rear Tipper), original parts are changed 1 to1, increasing stroke speed by about 25%, with maximum payload of 10kg receive. Contents: 1 spindle, 1 piston, installation instructions
item code: 907611
Warning! Not suitable for children under 14 years.
Fulda Variotonn off-road tire wide
1/14 Aluminum rim small long hole AG front axle
Aluminum rim small AG front axle, scale 1/14
• Small version
• Aluminum rims in 10-slot Euro Design
• Suitable to all wide tires in Tamiya scale
• Carrier 12 mm hexagon
• DimensionsØxB: 49 x 21 mm
• Weight approx. 57 g / piece
• Incl. 20 ornamental screws and 2 hub caps
• Delivery 2 pieces
item code: 907411
Warning! Not suitable for children under 14 years.
1/14 aluminum rim wide long hole AG front axle
Aaluminum rim wide long hole AG front axle, scale 1/14
• Wide version
• Aluminum rims in 10-slot Euro Design
• Suitable to all wide tires in Tamiya scale
• Carrier 12 mm hexagon
• DimensionsØxB: 49 x 28 mm
• Weight approx. 65 g / piece
• Incl. 20 ornamental screws and 2 hub caps
• Delivery 2 pieces
item code: 907412
Warning! Not suitable for children under 14 years.
Cab lock MB Arocs,
Cardan taker, 4mm bore
Cardan taker, 4mm bore, made of steel, with transverse bore M3 for mounting on the drive shaft, suitable for the rear axle item code: 251210, for cardan shaft assembly item code: 224489, for double cardan item code: 224490 and to the planetary gears item code: 215589, 224503 and 224504, Contents: 2 drivers, 2 stud bolts M3x3
item code: 224499
Warning! Not suitable for children under 14 years.
Top light holder MB Arocs
Top light holder MB Arocs, scale 1/14, suitable for the Arocs of Tamiya, plastic top light holder, headlight housing in black, four holders for the additional mounting of worklights (item code: 907144 and 907578), Contents: 1 Top light holder, 4 headlamp housing , 4 clear glasses, 4 blue glasses, 4 holders, mounting material and instructions (delivery without bulbs)
item code: 907599
Warning! Not suitable for children under 14 years.
Tank bracket set
Tank bracket set, suitable for the 3-axle Arocs (not suitable for the new tipper) and Actros from Tamiya, for attaching the tanks to the frame when the original battery compartment is removed. Contents: 2 aluminum brackets, mounting screws, instructions
item no: 907584
Warning! Not suitable for children under 14 years.
Truck antenna set universal
3-speed gearbox with transfer case and self-locking differential
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
item code: 251106
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 2:1 with self-locking differential
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 1:1 with self-locking differential
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251200
Warning! Not suitable for children under 14 years.
1/16 rim adapter rear for double tires
Driven front axle with self-locking differential
Driven front axle with self-locking differential, very true to detail, for truck models in the scale 1/16.
The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing.
• Lifelike front axle
• high ground clearance thanks to a "slim" differential housing (height 35 mm)
• 13-times ball-bearing
• self-locking differential (shift servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model.
• 4 mm transmission / input shaft
• Axle shaft 6mm, fits the most popular rims in 1/16 scale
• simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit)
• Dimensions front axle LxWxH: 57 x 167 x 35 mm
• with flanged wheel hub, suitable for the most common rims in 1/16 scale
• Weight approx. 160 g
• Supplied as a kit with pre-assembled differential
• suitable for the most common axle suspensions, including attachment point for pendulum suspension systems
item code: 251215
Warning! Not suitable for children under 14 years.
Warning! Not suitable for children under 14 years. 
Rear axle with self-locking differential
Rear axle with self-locking differential, very true to detail, for truck models in the scale 1/16.
The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing.
• Exactly modeled rear axle
• high ground clearance thanks to a "slim" differential housing (height 35 mm)
• 11 ball bearings
• self-locking differential (shift servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model.
• 4 mm transmission / input shaft
• Axle shaft 6mm, fits the most popular rims in 1/16 scale
• simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit)
• Dimensions rear axle LxWxH: 46 x 165 x 35 mm
• Weight approx: 130 g
• Supplied as a kit with pre-assembled differential
• suitable for the most common axle suspensions, including attachment point for pendulum suspension systems
item code: 251210
Warning! Not suitable for children under 14 years.
Trailer support set small
Trailer support set small, scale 1/14, housing made of aluminum, steel stamp with clamping screw, aluminum base, fixing screws. Dim. : Housing 10x10x34,5mm with 2 mounting holes M3, punch 5 Ø x 32mm, foot 19 Ø x 3,5mm, total length retracted: 38mm, extended 63mm, content: 2 housings, 2 punches, 2 feet, 2 clamping screws and four fixing screws M3x6
item code: 907589
Warning! Not suitable for children under 14 years.
Trailer door hinge
Number plate holder and buffer
Alu rear wheel round hole
Alu rear wheel round hole, scale 1/14, round hole, aluminum wheel hubs with hexagon socket, aluminum cover, capsscrews chrom, set for one axle, fits all Tamiya 2 and 3 axles, content: 4 aluminum rims, 2 wheel hubs with hexagon socket, 2 alu cover with 0-ring, 20 capscrews chrome, manual
item code : 907160
Alu front wheel wide round hole
Alu – flat bed twin rim
1/14 servo mount, fits Carson 2 speed transfer case
