Here you get going with your truck or trailer. You can find a rich selection of parts to upgrade your truck or trailer.
Fulda Variotonn off-road wide tyres 1/8
Trailer axle for classic trucks
Trailer axle for classic trucks, scale 1/16, axle made of 8mm steel, leaf spring mount made of plastic, suitable for the leaf spring set art.no. 2124, distance between leaf springs approx. 50mm ( from centre to centre ), track width approx. 150mm with double tyres ( trilex rims art.no. 220995 ), contents: 1 axle shaft, 1 set of leaf spring mounts, fixing material
Attention! Not suitable for children under 14 years.
item code: 220992
Drive set for the Büssing 8000 S 13
Drive set for the Büssing 8000 S 13, consisting of a 7.2 volt underfloor motor with planetary gearbox from the company Servonaut, the motor is pre-disturbed , has an idle speed of 470 rpm, the rated speed is 390 rpm, rated torque: 34.6 Ncm, the matching motor holder made of aluminum and the cardan shaft made of stainless steel with appropriate length compensation, mounting hardware and installation instructions. Contents: 1 gear motor, 1 motor holder, 1 cardan shaft, installation instructions
Caution. Not suitable for children under 14 years.
item code: 251001
Rear axle for classic trucks
Rear axle for classic trucks, scale 1/16, reduction 3:1, bevel gears and spur differential made of hardened steel, 6 ball bearings, reinforced axle housing made of plastic, input and output shafts 5mm Ø, track width 150mm (with our Trilex - double rims item no. 220995), mounting width of the leaf springs 58mm, suitable for a frame width of 50mm, kit with detailed assembly instructions.
Attention! Not suitable for children under 14 years.
item code: 220993
Road tire Fulda Coloss
Aluminum stanchion
Aluminum stanchion, scale 1/14, made of aluminum and steel, for retrofitting and expanding, suitable for the 3-axle stanchion trailer III item code: 907629 and for the 2-axle stake trailer Riedler item code: 907622, stanchion holder can be loosened using two grub screws and repositioned or removed as required, detailed assembly instructions and fastening material, content: 1 stanchion
item code: 907652
Caution! Not suitable for children under the age of 14.
Conversion kit building material trailer
Conversion kit building material trailer, scale 1/14, suitable for flatbed trailer III item code: 907650
Technical details:
- CNC milled aluminum side walls with detailed surface engravings
- Hinge made of 1mm sheet steel
- The side walls are locked by neodymium magnets
- All 9 side walls are functional 4 hinges per board wall
- Center posts can be removed for better loading
- detailed assembly instructions + decal sheet
Weight: approx. 2,500g
Item code: 907649
Caution! Not suitable for children under the age of 14.
Flatbed trailer III made of steel
Flatbed trailer III, scale 1/14 Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid aluminum front wall
- Detailed trailer axles with dummy air springs, optionally with a +8mm lift
- Solid steel underride protection (left/right)
- Steel spare wheel holder with spare wheel
- Chrome rims with ball bearings and wide road tires
- 7-chamber taillights and license plate
- holder included 16 lashing eyes
- Real wood floor application
- 8mm aluminum bumper
- detailed assembly instructions + decal sheet
Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g
Item No. 907650
Caution! Not suitable for children under the age of 14.
Pallet box made of steel
Pallet box made of steel, scale 1/14, compatible with the new 3-axle flatbed trailer III item code: 907650 and item code: 907629 Stanchion trailer III
Technical details:
- Sheet steel laser cut and CNC bent
- authentic opening mechanism
- Space for 24 pallets
- The flap is locked by neodymium magnets
- 6 Euro pallets made of plastic
- detailed assembly instructions and fastening material
Dimensions: LxWxH: 215 x 185 x 45mm, weight: 1,200g
item code: 907651
Caution! Not suitable for children under the age of 14.
Drive shaft set (5) 8×8 MB Arocs rear tipper with compensation
Drive shaft set (5) 8x8 MB Arocs rear tipper with compensation, scale 1/14
This drive shaft set is required to convert the MB Arocs rear tipper to all-wheel drive.
(Application: From 2-speed compact transmission to 2-speed transfer case and on to front axle 1 and front axle 2, rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft from 2-G gearbox to transfer case 155 mm
- Shaft from transfer case to rear axle 1 38 mm
- Shaft from transfer case to front axle 1 45 mm
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (with compensation 38 - 43 mm)
- Shaft with length compensation from front axle 1 to front axle 2 67 mm (with compensation 67 - 72 mm)
- Material: hardened steel
Content: 5 drive shafts
item code: 907642
Caution! Not suitable for children under 14 years of age.
Drive shaft set (4) 6×6 Volvo FH16 timber truck with compensation
Drive shaft set (4) 6x6 Volvo FH16 timber truck with compensation, scale 1/14
This drive shaft set is required to convert the Volvo FH16 timber truck to four-wheel drive.
(Application: From the 2-speed compact transmission to the 2-speed transfer case and on to the front, rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers. Total length / (with length compensation):
- Shaft from 2-G gearbox to transfer case 45 mm
- Shaft with length compensation from transfer case to rear axle 1 57 mm (57 - 62 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (with compensation 38 - 43 mm)
- Shaft with length compensation from transfer case to front axle 67 mm (with compensation 67 - 82 mm)
- Material: hardened steel
Content: 4 drive shafts
item code: 907639
Caution! Not suitable for children under 14 years of age.
Drive shaft set (4) 6×6 MB Arocs tipper with compensation
Drive shaft set (4) 6x6 MB Arocs tipper with compensation, scale 1/14
This drive shaft set is required when the 3-axle rear tipper is converted to four-wheel drive.
(Application: From the 2-speed compact transmission to the 2-speed transfer case and on to the front, rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft from 2-G gearbox to transfer case 45 mm
- Shaft with length compensation from transfer case to rear axle 1 57 mm (57 - 62 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (with compensation 38 - 43 mm)
- Shaft with length compensation from transfer case to front axle 67 mm (with compensation 67 - 82 mm)
- Material: hardened steel
Content: 4 drive shafts
item code: 907638
Caution! Not suitable for children under 14 years of age.
Drive shaft set (2) 6×4 MB Arocs tipper with compensation
Drive shaft set (2) 6x4 MB Arocs tipper with compensation, scale 1/14
(application: from TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft from 3-G gearbox (TAMIYA) to the rear axle 1 111 mm
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907637
Caution! Not suitable for children under 14 years of age.
Drive shaft set (2) 6×4 with compensation
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
Drive shaft set (4) 6×6 with compensation
Drive shaft set (4) 6x6 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is converted to four-wheel drive.
(Application: From the 2-speed compact transmission to the 2-speed transfer case and on to the front, rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft from 2-G gearbox to transfer case 45 mm
- Shaft from transfer case to rear axle 1 26 mm
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (with compensation 38 - 43 mm)
- Shaft with length compensation from transfer case to front axle 72 mm (with compensation 77 - 82 mm)
- Material: hardened steel
Content: 4 drive shafts
item code: 907635
Caution! Not suitable for children under 14 years of age.
Drive shaft set (3) 4×4 with compensation
Drive shaft set (3) 4x4 with compensation, scale 1/14
This drive shaft set is required when converting a 2-axle tractor to four-wheel drive.
(Application: From the 2-speed compact transmission to the 2-speed transfer case and on to the front and rear axles)
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shaft is safely guided in the drivers.
Total length / (with length compensation):
- Shaft from 2-G gearbox to transfer case 50 mm
- Shaft with length compensation from transfer case to rear axle 59 mm (with compensation 59 - 64 mm)
- Shaft with length compensation from transfer case to front axle 77 mm (with compensation 77 - 82 mm)
Material: hardened steel
Content: 3 drive shafts
item code: 907634
Caution! Not suitable for children under 14 years of age.
Trailer splash guard
Trailer splash guard, scale 1/14, suitable for the Carson trailer item no. 907235 Megarunner and item no. 907629 Stake trailer, the set can also be used for self-construction Contents: 1 bracket, 1 pointed rag, decals, assembly material, instructions
Item code: 907646
Caution! Not suitable for children under 14 years of age.
Trailer Air-Tank (2)
Trailer Air-Tank (2), scale 1/14, turned from aluminum, suitable for the new stake trailer Art.No. 907629, for mounting on other models, drilling dimensions are included in the scope of delivery, length 65mm, diameter 19mm, mounting M3, Content: 2 air tanks, fastening material, instructions
item code: 907645
Caution! Not suitable for children under 14 years of age.
Plast. Parts Trailersus. w/8mm lift
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
item code: 907644
Caution! Not suitable for children under 14 years of age.
Trailer axle with lift kit + 8mm
Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions
Item No. 907643
Caution! Not suitable for children under 14 years of age.
Windshield wiper – set
Windshield wiper - set, scale 1/14, suitable for construction machines, buses, snowcats and so on, from plastic, included: a big doublearm-wiper and a small wiper, measure: small wiper: total length 42mm, wiper plade 31mm, arbor hole 2mm, big wiper: length from the wiper plade 60mm, from the arm 53mm, arbor hole 2mm, the set included 5 pices
item code: 207046
Caution! Not suitable for children under 14 years of age.
Bow holder end part left
Bow holder end part left, scale 1/14, made of plastic, suitable for the Carson tarpaulin trailer item code 907005, 907080, 907235, 907630, also ideally suited for self-built, dimensions: height 175mm, width 7mm, thickness 4mm, content: 1 bow holder end part left
item code: 18331
Caution! Not suitable for children under 14 years of age.
Bow holder end part right
Bow holder end part right, scale 1/14, made of plastic, suitable for the Carson tarpaulin trailer item code 907005, 907080, 907235, 907630, also ideally suited for self-built, dimensions: height 175mm, width 7mm, thickness 4mm, content: 1 bow holder end part right
item code: 18331
Caution! Not suitable for children under 14 years of age.
Bow holder middle part
Bow holder middle part, scale 1/14, made of plastic, suitable for the Carson curtains side trailer Art.No. 907005, 907080, 907235 and 907630, also ideally suited for self-built, dimensions: height 175mm, width 14mm, thickness 4mm, content: 1 bow holder middle part + 1 bracket
item code: 18330
Caution! Not suitable for children under 14 years of age.