Here you get going with your truck or trailer. You can find a rich selection of parts to upgrade your truck or trailer.
Gas cylinder 11kg
Half-round mudguard set
Half-round mudguard set, scale 1/16, made of plastic, for trailers with single tires, dimensions: length 88mm, width 31mm, height 43mm, mounting hole spacing 55.5mm, steel retaining rods with M3 thread, for frame widths of 84mm, contents: 2 mudguards, 4 steel retaining rods, 1 instruction manual
Attention! Not suitable for children under 14 years of age.
item code: 220963
Low loader wheel hub
Low loader wheel hub, scale 1/8, wheel hub and hub cap turned from aluminum, 10 threaded holes M3, 2x ball bearing seat 13 Ø, hub cap removable, brake drum indicated, dimensions: total length 55mm, Ø drum 45mm, Ø hub 22mm, bolt circle 28mm, contents: 1x wheel hub, 1x hub cap, 1x O-ring
Attention! Not suitable for children under 14 years.
item code: 220935
Gear motor for low bed low loader
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
item code : 907703
Low loader rim 1/8
Servo bracket set steering axle low loader
Servo holder set, suitable for the Carson lowbed low loader Art. no. 907700, steel holders, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907701
Fulda Ecotonn low loader tires 1/8
Servo bracket set steering axle GH
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
1/14 Steered low loader axle
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Wooden plateau Goldhofer
1/16 Steered low-loader axle
Steered low-loader axle, scale 1/16, very sturdy design, axle parts made of hardened steel, aluminum linkages, steering heads with plain bearings, wheel studs Ø 5mm, track width adjustable between 163 and 165mm, steering angle up to a maximum of 45° possible, steering rod for connecting additional steel axles with M3 ball joints, two different hole patterns for adapting the leaf springs to the frame width, weight approx. 110g, total length: 142.5mm, height: 18.5mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 251225
1/8 transfer case with differential, reduction ratio 2:1
Transfer case with longitudinal differential, scale 1/8, reduction ratio 2:1, permanent all-wheel drive, milled aluminum housing, hardened steel gears, multiple ball bearings, input and output shafts with 5mm hexagon, aluminum mounting bracket, weight: 330g, dimensions: housing (wxhxl) 69x44x50mm, total length with hexagon shafts 73mm, contents: 1 transfer case with bracket and mounting screws
Caution! Not suitable for children under 14 years of age.
item code: 216145