Transfer gear box
79,20 €
incl. 19% VAT plus Shipping
Transfer gear box, scale 1:8, Housing from aluminum, pinion`s from steel, hardened, speed reduction 3:1, with ball bearing, 1 input and 2 output shaft`s with SW 5, holder from aluminum
Item code: 216127
In stock
Description
Transfer gear box, scale 1:8, Housing from aluminum, pinion`s from steel, hardened, speed reduction 3:1, with ball bearing, 1 input and 2 output shaft`s with SW 5, holder from aluminum
Additional information
| Weight | 0,252 kg |
|---|---|
| Dimensions | 20 × 14 × 6 cm |
| Lieferzeit |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
1/8 transfer case with differential, reduction ratio 2:1
incl. 19% VAT
plus Shipping
Transfer case with longitudinal differential, scale 1/8, reduction ratio 2:1, permanent all-wheel drive, milled aluminum housing, hardened steel gears, multiple ball bearings, input and output shafts with 5mm hexagon, aluminum mounting bracket, weight: 330g, dimensions: housing (wxhxl) 69x44x50mm, total length with hexagon shafts 73mm, contents: 1 transfer case with bracket and mounting screws
Caution! Not suitable for children under 14 years of age.
item code: 216145
1/8 transfer case with differential, reduction ratio 1:1
incl. 19% VAT
plus Shipping
Transfer case with longitudinal differential, scale 1/8, reduction ratio 1:1, permanent all-wheel drive, milled aluminum housing, hardened steel gears, multiple ball bearings, input and output shafts with 5mm hexagon, aluminum mounting bracket, weight: 330g, dimensions: housing (wxhxl) 69x44x50mm, total length with hexagon shafts 73mm, contents: 1 transfer case with bracket and mounting screws
item code: 216140
Caution! Not suitable for children under 14 years of age.
Four-wheel transfer case 2:1 with self-locking differential
incl. 19% VAT
plus Shipping
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
Transfercase for 4-wheel drive
incl. 19% VAT
plus Shipping
Transfercase for 4-wheel drive, support set, the front axle can be connect with a servo, the output shaft have a diameter from 5mm and be feature with 4 ball bearings, speed reduction 2:1, this set is suitable for the 3-gear with item code 251100, instruction and fixing parts are included
Item code 251180
2-speed control gear box
incl. 19% VAT
plus Shipping
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324
Item code: 242424
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
Reviews
There are no reviews yet.