Transfer gear box
79,20 €
incl. 19% VAT plus Shipping
Transfer gear box, scale 1:8, Housing from aluminum, pinion`s from steel, hardened, speed reduction 3:1, with ball bearing, 1 input and 2 output shaft`s with SW 5, holder from aluminum
Item code: 216127
In stock
Transfer gear box, scale 1:8, Housing from aluminum, pinion`s from steel, hardened, speed reduction 3:1, with ball bearing, 1 input and 2 output shaft`s with SW 5, holder from aluminum
| Weight | 0,252 kg |
|---|---|
| Dimensions | 20 × 14 × 6 cm |
| Lieferzeit | approx: 2-3 days |
You must be logged in to post a review.
Related products
1/8 transfer case with differential, reduction ratio 1:1
incl. 19% VAT
plus Shipping
Transfer case with longitudinal differential, scale 1/8, reduction ratio 1:1, permanent all-wheel drive, milled aluminum housing, hardened steel gears, multiple ball bearings, input and output shafts with 5mm hexagon, aluminum mounting bracket, weight: 330g, dimensions: housing (wxhxl) 69x44x50mm, total length with hexagon shafts 73mm, contents: 1 transfer case with bracket and mounting screws
item code: 216140
Caution! Not suitable for children under 14 years of age.
1/8 transfer case selectable, reduction ratio 1:1
incl. 19% VAT
plus Shipping
Transfer case selectable, scale 1/8, reduction ratio 1:1, front axle selectable via servo, milled aluminium housing, hardened steel gears, multiple ball bearings, input and output shafts with hexagon 5mm, shift shaft and shift rod made of 3mm steel, mounting bracket made of aluminium, weight: 360g, dim. Housing (wxhxl) 69x44x50mm, total length with hexagonal shafts 73mm, Contents: 1 transfer case with bracket, shift rod, ball heads and fixing screws
item code: 216130
Caution! Not suitable for children under 14 years of age.
Alum. Transfer-gearbox Tipper 6×6
incl. 19% VAT
plus Shipping
Alum. Transfer-gearbox Tipper 6x6, Scale 1/14, fits the Tamiya Arocs tipper, housing made of machined aluminum, 6 ball bearings, the reduction ratio is 3: 1, all hardened, contents: 1 transfer case, 3 gimbals, 2 blocks, 2 bushes, fixing screws
item code: 907610
Warning! Not suitable for children under 14 years.
Transfercase for 4-wheel drive
incl. 19% VAT
plus Shipping
Transfercase for 4-wheel drive, support set, the front axle can be connect with a servo, the output shaft have a diameter from 5mm and be feature with 4 ball bearings, speed reduction 2:1, this set is suitable for the 3-gear with item code 251100, instruction and fixing parts are included
Item code 251180
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.