Transfer gear box
79,20 €
incl. 19% VAT plus Shipping
Transfer gear box, scale 1:8, Housing from aluminum, pinion`s from steel, hardened, speed reduction 3:1, with ball bearing, 1 input and 2 output shaft`s with SW 5, holder from aluminum
Item code: 216127
In stock
Description
Transfer gear box, scale 1:8, Housing from aluminum, pinion`s from steel, hardened, speed reduction 3:1, with ball bearing, 1 input and 2 output shaft`s with SW 5, holder from aluminum
Additional information
| Weight | 0,252 kg |
|---|---|
| Dimensions | 20 × 14 × 6 cm |
| Lieferzeit |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
Alum. Transfer-gearbox Tipper 6×6
incl. 19% VAT
plus Shipping
Alum. Transfer-gearbox Tipper 6x6, Scale 1/14, fits the Tamiya Arocs tipper, housing made of machined aluminum, 6 ball bearings, the reduction ratio is 3: 1, all hardened, contents: 1 transfer case, 3 gimbals, 2 blocks, 2 bushes, fixing screws
item code: 907610
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 1:1 with self-locking differential
incl. 19% VAT
plus Shipping
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251200
Warning! Not suitable for children under 14 years.
Transfer case 4WD 2:1
incl. 19% VAT
plus Shipping
Transfer case 4WD, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 2:1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251195
Transfercase for 4-wheel drive
incl. 19% VAT
plus Shipping
Transfercase for 4-wheel drive, support set, the front axle can be connect with a servo, the output shaft have a diameter from 5mm and be feature with 4 ball bearings, speed reduction 2:1, this set is suitable for the 3-gear with item code 251100, instruction and fixing parts are included
Item code 251180
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.