Servo bracket set steering axle GH
31,49 €
incl. 19% VAT plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
In stock
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
| Weight | 0,055 kg |
|---|---|
| Dimensions | 15 × 8 × 1 cm |
You must be logged in to post a review.
You may also like…
1/14 Steered low loader axle
incl. 19% VAT
plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Related products
Wide tyre insert
incl. 19% VAT
plus Shipping
Wide tyre insert, scale 1/8, this cellular rubber strip is suitable for insertion into truck tyres item nos. 218082 and 218084, giving the tyres better stability and load-bearing capacity, dimensions: 320 x 25 x 15 mm, contents: 1 strip
Warning! Not suitable for children under 14 years of age.
item code: 218089
Half-round mudguard set
incl. 19% VAT
plus Shipping
Half-round mudguard set, scale 1/16, made of plastic, for trailers with single tires, dimensions: length 88mm, width 31mm, height 43mm, mounting hole spacing 55.5mm, steel retaining rods with M3 thread, for frame widths of 84mm, contents: 2 mudguards, 4 steel retaining rods, 1 instruction manual
Attention! Not suitable for children under 14 years of age.
item code: 220963
Rear light set FH16 XL750 (4×2)
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 XL750 (4×2), from 7.2 to 12 volts, true to original light functions and look of the tail lights with the following functions: Brake light, reversing light, fog light, parking light, blinker l+r, cable length approx. 55cm, contents: 1 set of housing with built-in circuit board
Attention : Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907702
Servo bracket set steering axle low loader
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson lowbed low loader Art. no. 907700, steel holders, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907701
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
Pivoted bogie with axle
incl. 19% VAT
plus Shipping
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions
Technical details:
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber
-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm- Trailer axle with dummy air suspensionDanger!
Attention! Not suitable for children under 14 years.
item code: 907625
1/14 driven front axle with self-locking differential
incl. 19% VAT
plus Shipping
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
Reviews
There are no reviews yet.