3-axle-stanchion-trailer 1/16
549,00 €
incl. 19% VAT plus Shipping
3-axle-stanchion-trailer, 1/16 scale, kit, unpainted,
Product details:
– Rigid steel frame in sandwich construction (3 mm and 1 mm steel, laser-cut)
– SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
– Aluminium rims with wide Fulda Multitonn II tyres, ball-bearing mounted
– Mechanical trailer supports, pre-prepared for electric drive (gear motors not included in the kit)
– CNC-machined aluminium stanchions, infinitely adjustable, secured with clamps
– Solid aluminium front panel
– Steel underrun protection (left/right)
– Single-arm steel spare wheel holder with spare wheel
– Mud flaps
– Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Saddle height 90 – 100 mm
Weight 4,500 g
Warning! Not suitable for children under 14 years of age.
item code: 251060
In stock
3-axle-stanchion-trailer, 1/16 scale, kit, unpainted,
Product details:
– Rigid steel frame in sandwich construction (3 mm and 1 mm steel, laser-cut)
– SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
– Aluminium rims with wide Fulda Multitonn II tyres, ball-bearing mounted
– Mechanical trailer supports, pre-prepared for electric drive (gear motors not included in the kit)
– CNC-machined aluminium stanchions, infinitely adjustable, secured with clamps
– Solid aluminium front panel
– Steel underrun protection (left/right)
– Single-arm steel spare wheel holder with spare wheel
– Mud flaps
– Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Saddle height 90 – 100 mm
Weight 4,500 g
Warning! Not suitable for children under 14 years of age.
| Dimensions | 105 × 24 × 9 cm |
|---|
You must be logged in to post a review.
You may also like…
Lighting set for semi-trailer 1/16
incl. 19% VAT
plus Shipping
Lighting set for semi-trailer 1/16, 12 volts, suitable for the building materials semi-trailer (item no. 251050), the stanchion semi-trailer (item no. 251060) and the semi-trailer chassis (item no. 251040).
Set consisting of:
2 clear marker lights
8 orange marker lights
1 pair of rear light boards
1 number plate light
Contents: 10 marker lights, 1 pair of rear light boards, 1 number plate board, instructions
Warning! Not suitable for children under 14 years of age.
item code: 251051
Trailer palette case
incl. 19% VAT
plus Shipping
Trailer palette case, scale 1/16 - 1/14.5, kit, made of laser-cut and CNC-bent sheet steel, true-to-original opening mechanism, space for 12 pallets, flap locked by neodymium magnets, delivery includes 6 wooden Euro pallets, suitable for building material trailer item code 251050, dimensions (LxWxH): 215x172x40mm, contents: 1 pallet box, 6 wooden Euro pallets, detailed assembly instructions
Warning! Not suitable for children under 14 years of age.
item code: 251053
Aluminium storage box
incl. 19% VAT
plus Shipping
Storage box, scale 1/16 - 1/14.5, milled from aluminium, magnetic closure, pre-assembled, suitable for building material trailer item code 251050 or for DIY projects, box dimensions (LxWxH): 60x34x42mm, with bracket (LxWxH) 64x41x42mm, Contents: 1 storage box, 2 brackets + mounting screws, instructions
Warning! Not suitable for children under 14 years of age.
item code: 251054
Related products
Draw Tube extens. Pole Trailer (56310)
incl. 19% VAT
plus Shipping
Draw Tube extens. Pole Trailer, scale 1/14, suitable for Tamiya telescopic semi-trailer (56310), metal kit
Product details:
Euro bumper with 7-chamber rear lights and number plate holder
Aluminium drawbar extension, easy to replace
For transporting goods up to a length of 1200 mm
Warning! Not suitable for children under 14 years of age.
item code: 907733
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
3-AXLE STANCHION TRAILER III, NEW SUSP.
incl. 19% VAT
plus Shipping
3-AXLE STANCHION TRAILER III, NEW SUSP. The new 3-axle stanchion trailer from CARSON for transporting logs or similar long loads is a perfect addition to the TAMIYA tractors. The basis for the trailer is a newly developed torsion-resistant frame (sandwich construction) made of 3 and 1 mm laser-cut sheet steel. A new suspension is also included, this can optionally be raised by 8 mm and thus balances the level of the saddle to a higher tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. Depending on the load and requirements, the six aluminum stanchions can be steplessly positioned on the chassis or removed. These are loosened or fixed using the two countersunk grub screws. A massive steel front wall secures the load to the front of the tractor. Two work lights can be optionally mounted on the front wall and also on the rear frame, the fixings are already provided. A stable underrun protection and a spare wheel holder made of steel complete the detailing of the model.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid steel front wall
- Stakes (one-piece) milled from solid aluminum
- The stanchion bracket can be loosened using two grub screws and repositioned or removed as required.
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm - Solid underrun protection made of steel (left / right)
- One-arm spare wheel holder made of steel with spare wheel
- Chrome rims with ball bearings and wide off-road tires
- 7-chamber taillights and license plate holder included
- Decor set, detailed building instructions
Dimensions: LxWxH: 980 x 190 x 310 mm, weight: 5,100 g
Attention! Not suitable for children under 14 years.
item code: 907629
2-axle dolly rigid for Gigaliners
incl. 19% VAT
plus Shipping
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers.
- steel frame (laser cut and welded)
- 7 chamber taillights
- 8-way ball-bearing wheels
- Air spring dummies
- Saddle plate made of plastic
- Tiller made of aluminum, adjustable in length and height
Technical specifications:
Length: 365mm
Width: approx. 195mm
Height: about 85mm
item code : 907210
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Reviews
There are no reviews yet.