Gear motor for low bed low loader
99,99 €
incl. 19% VAT plus Shipping
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
item code : 907703
In stock
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
| Weight | 0105 kg |
|---|---|
| Dimensions | 14 × 85 × 4 cm |
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
Related products
Wide tyre insert
incl. 19% VAT
plus Shipping
Wide tyre insert, scale 1/8, this cellular rubber strip is suitable for insertion into truck tyres item nos. 218082 and 218084, giving the tyres better stability and load-bearing capacity, dimensions: 320 x 25 x 15 mm, contents: 1 strip
Warning! Not suitable for children under 14 years of age.
item code: 218089
Rear light set FH16 XL750 (4×2)
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 XL750 (4×2), from 7.2 to 12 volts, true to original light functions and look of the tail lights with the following functions: Brake light, reversing light, fog light, parking light, blinker l+r, cable length approx. 55cm, contents: 1 set of housing with built-in circuit board
Attention : Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907702
Scania SLT8x4 warning bar/strobo set
incl. 19% VAT
plus Shipping
Scania SLT8x4 warning bar/strobo set, suitable for the Scania SLT8x4 from Tamiya, for 7.2 or 12 volt, warning bar SMD LED circuit board with 40 SMD LEDs, 2 rotating beacons
with strobe function, contents: 1 warning bar circuit board, 2 rotating beacon inserts, installation instructions
Suitable electronics: 907685 Universal light module LBS (not included)
Attention : Not suitable for the MFC
Caution! Not suitable for children under 14 years of age.
item code: 907697
1/16 Steered low-loader axle
incl. 19% VAT
plus Shipping
Steered low-loader axle, scale 1/16, very sturdy design, axle parts made of hardened steel, aluminum linkages, steering heads with plain bearings, wheel studs Ø 5mm, track width adjustable between 163 and 165mm, steering angle up to a maximum of 45° possible, steering rod for connecting additional steel axles with M3 ball joints, two different hole patterns for adapting the leaf springs to the frame width, weight approx. 110g, total length: 142.5mm, height: 18.5mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 251225
Drive set for the Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Drive set for the Büssing 8000 S 13, consisting of a 7.2 volt underfloor motor with planetary gearbox from the company Servonaut, the motor is pre-disturbed , has an idle speed of 470 rpm, the rated speed is 390 rpm, rated torque: 34.6 Ncm, the matching motor holder made of aluminum and the cardan shaft made of stainless steel with appropriate length compensation, mounting hardware and installation instructions. Contents: 1 gear motor, 1 motor holder, 1 cardan shaft, installation instructions
Caution. Not suitable for children under 14 years.
item code: 251001
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
Reviews
There are no reviews yet.