Cardan taker, 4mm bore
10,90 €
incl. 19% VAT plus Shipping
Cardan taker, 4mm bore, made of steel, with transverse bore M3 for mounting on the drive shaft, suitable for the rear axle item code: 251210, for cardan shaft assembly item code: 224489, for double cardan item code: 224490 and to the planetary gears item code: 215589, 224503 and 224504, Contents: 2 drivers, 2 stud bolts M3x3
item code: 224499
Warning! Not suitable for children under 14 years.
In stock
Cardan taker, 4mm bore, made of steel, with transverse bore M3 for mounting on the drive shaft, suitable for the rear axle item code: 251210, for cardan shaft assembly item code: 224489, for double cardan item code: 224490 and to the planetary gears item code: 215589, 224503 and 224504, Contents: 2 drivers, 2 stud bolts M3x3
Warning! Not suitable for children under 14 years.
| Weight | 0,013 kg |
|---|---|
| Dimensions | 13 × 7 × 1 cm |
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Rear axle with self-locking differential
incl. 19% VAT
plus Shipping
Rear axle with self-locking differential, very true to detail, for truck models in the scale 1/16.
The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing.
• Exactly modeled rear axle
• high ground clearance thanks to a "slim" differential housing (height 35 mm)
• 11 ball bearings
• self-locking differential (shift servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model.
• 4 mm transmission / input shaft
• Axle shaft 6mm, fits the most popular rims in 1/16 scale
• simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit)
• Dimensions rear axle LxWxH: 46 x 165 x 35 mm
• Weight approx: 130 g
• Supplied as a kit with pre-assembled differential
• suitable for the most common axle suspensions, including attachment point for pendulum suspension systems
item code: 251210
Warning! Not suitable for children under 14 years.
Related products
1/14 Propeller shaft set (2) 6×4 Steel
incl. 19% VAT
plus Shipping
1/14 Propeller shaft set (2) 6x4 Steel
- Suitable for the Tamiya three-axle tractor
- This drive shaft set is required if a 3-axle tractor is equipped with two self-locking rear axles from Carson.
- Dim. Drive shaft: length 1, 95 mm; Length 2, 41 mm
- Material: steel hardened
- Package content: 2 drive shafts.
item code 907279
Reviews
There are no reviews yet.