3-axle Material trailer 1/16
799,00 €
incl. 19% VAT plus Shipping
3-axle Material trailer, scale 1/16, kit, unpainted
Product details:
- Torsion-resistant steel frame in sandwich construction (3 and 1 mm steel, laser cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball bearings
- Real wood floor application
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Side walls are locked with neodymium magnets
- All 9 side walls are functional
- 4 hinges per side wall (hinges made of 1 mm sheet steel)
- Side wall posts can be removed
- Aluminium front wall
- Steel underride guard (left/right)
- Single-arm steel spare wheel holder with spare wheel
- 16 lashing eyes
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Loading area 941x167mm
Saddle height 90 – 100mm
Weight 5,500g
Warning! Not suitable for children under 14 years of age.
item code: 251050
In stock
3-axle Material trailer, scale 1/16, kit, unpainted
Product details:
- Torsion-resistant steel frame in sandwich construction (3 and 1 mm steel, laser cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball bearings
- Real wood floor application
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Side walls are locked with neodymium magnets
- All 9 side walls are functional
- 4 hinges per side wall (hinges made of 1 mm sheet steel)
- Side wall posts can be removed
- Aluminium front wall
- Steel underride guard (left/right)
- Single-arm steel spare wheel holder with spare wheel
- 16 lashing eyes
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Loading area 941x167mm
Saddle height 90 – 100mm
Weight 5,500g
Warning! Not suitable for children under 14 years of age.
| Weight | 7,940 kg |
|---|---|
| Dimensions | 104 × 23 × 9,5 cm |
You must be logged in to post a review.
You may also like…
Lighting set for semi-trailer 1/16
incl. 19% VAT
plus Shipping
Lighting set for semi-trailer 1/16, 12 volts, suitable for the building materials semi-trailer (item no. 251050), the stanchion semi-trailer (item no. 251060) and the semi-trailer chassis (item no. 251040).
Set consisting of:
2 clear marker lights
8 orange marker lights
1 pair of rear light boards
1 number plate light
Contents: 10 marker lights, 1 pair of rear light boards, 1 number plate board, instructions
Warning! Not suitable for children under 14 years of age.
item code: 251051
Trailer palette case
incl. 19% VAT
plus Shipping
Trailer palette case, scale 1/16 - 1/14.5, kit, made of laser-cut and CNC-bent sheet steel, true-to-original opening mechanism, space for 12 pallets, flap locked by neodymium magnets, delivery includes 6 wooden Euro pallets, suitable for building material trailer item code 251050, dimensions (LxWxH): 215x172x40mm, contents: 1 pallet box, 6 wooden Euro pallets, detailed assembly instructions
Warning! Not suitable for children under 14 years of age.
item code: 251053
Aluminium storage box
incl. 19% VAT
plus Shipping
Storage box, scale 1/16 - 1/14.5, milled from aluminium, magnetic closure, pre-assembled, suitable for building material trailer item code 251050 or for DIY projects, box dimensions (LxWxH): 60x34x42mm, with bracket (LxWxH) 64x41x42mm, Contents: 1 storage box, 2 brackets + mounting screws, instructions
Warning! Not suitable for children under 14 years of age.
item code: 251054
Related products
3-axle-semi-trailer chassis 1/16
incl. 19% VAT
plus Shipping
3-axle-semi-trailer chassis, 1/16 scale, kit, unpainted,
Ideal as a base for your own projects and ideas.
Product details:
Rigid steel frame in sandwich construction (3 mm and 1 mm steel, laser-cut)
SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
Aluminium rims with Fulda Multitonn II wide tyres, ball-bearing mounted
Mechanical trailer supports, pre-prepared for electric drive (gear motors not included in the kit)
Steel underrun protection (left/right)
Single-arm steel spare wheel holder with spare wheel
Mud flaps
Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 90 mm
Saddle height 90 – 100 mm
Weight 3,500 g
Warning! Not suitable for children under 14 years of age.
item Code: 251040
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
2-axle trailer
incl. 19% VAT
plus Shipping
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed
- Drop sides made of injection molded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tires
- Bracket with spare tire
- Platform with real wooden floor
- Tail lights with license plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
3-Axle Heavy Low Loader
incl. 19% VAT
plus Shipping
3-Axle Heavy Low Loader
A successful addition to the various TAMIYA tractors. The ramp can be folded down by hand to drive on.
The kit impresses with the following features:
CNC machined aluminum frame plus king pin
• Height adjustable trailer supports
• 3 axles with twin tires suspended from leaf springs
• ball bearing
• 4-chamber rear lights can be electrically retrofitted.
Suitable for all TAMIYA tractors.
The ramp can be folded down by hand to drive on.
The trailer is equipped with three axles with twin tires. The chassis is suspended with leaf springs. The CNC machined frame is made of aluminum. All supports are mechanically adjustable. The 4-chamber taillights can be electrically retrofitted.
Length: ca. 990 mm, Width:ca. 190 mm, Height: ca. 135mm, Weight:ca .4,5 kg
Attention! Not suitable for children under 14 years.
item code: 907000
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Liebherr LR 634 track loader
incl. 19% VAT
plus Shipping
Liebherr LR 634 Track Loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale.
item code: 907111
Reviews
There are no reviews yet.