2-Axle Material Trailer
575,00 €
incl. 19% VAT plus Shipping
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
– Torsion-resistant steel frame in sandwich construction
– Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
– Bogie made of sheet steel in sandwich construction
– Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
– Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
– The drawbar is held by two tension springs for easier attachment
– Coupling height 75 mm
– CNC milled aluminum side panels with detailed surface engravings
– The side walls are locked by neodymium magnets
– All 5 drop sides are functional
– 5 hinges per side wall
– 4 hinges on the rear drop side
– Real wood floor application
– Chrome rims with ball bearings and wide tires
– Solid underrun protection made of steel (left / right)
– Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
– Mudguards with splash guards
– Bumper rag set
– CNC machined aluminum rear bumper
– Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
item code: 907624
Attention! Not suitable for children under 14 years.
In stock
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
– Torsion-resistant steel frame in sandwich construction
– Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
– Bogie made of sheet steel in sandwich construction
– Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
– Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
– The drawbar is held by two tension springs for easier attachment
– Coupling height 75 mm
– CNC milled aluminum side panels with detailed surface engravings
– The side walls are locked by neodymium magnets
– All 5 drop sides are functional
– 5 hinges per side wall
– 4 hinges on the rear drop side
– Real wood floor application
– Chrome rims with ball bearings and wide tires
– Solid underrun protection made of steel (left / right)
– Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
– Mudguards with splash guards
– Bumper rag set
– CNC machined aluminum rear bumper
– Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
Attention! Not suitable for children under 14 years.
| Weight | 4,5 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Building material platform short for tractors
incl. 19% VAT
plus Shipping
Building material platform short for tractors, scale 1/14, suitable for the Tamiya Volvo FH16 timber transporter. A wood transporter can be converted into a building material transporter in no time at all. The basis of this platform structure is a steel frame with an integrated subframe for mounting on the TAMIYA Volvo FH16 chassis. The original fastening points / screw connections were used for the assembly. There is no need to drill holes manually. The detailed side walls are provided with surface engravings on both sides and are movably mounted in stable hinges. The side walls are "locked" by means of powerful neodymium magnets, two pieces are almost invisibly embedded in the side wall. The wooden application contained in the conversion kit underlines the detailing of the platform structure and can be aged and adjusted according to your own requirements.
- Base support / subframe made of steel (CNC milled)
- CNC milled side walls made of aluminum, with detailed surface engravings
- The drop sides are locked with neodymium magnets
- All 4 drop sides are functional
- 3 hinges per side wall
- Real wood floor application
- Dim. (lxwxh): 440x195x130mm
- Drop side height 75mm
- Weight: approx. 2.3kg Danger
Attention! Not suitable for children under 14 years.
item code: 907510
Construction platform long
incl. 19% VAT
plus Shipping
Construction platform long, scale 1/14, suitable for the Tamiya Volvo FH16 timber transporter.
Converted a timber transporter into a building material transporter in no time at all.
The basis of this platform construction is a steel frame with an integrated subframe for mounting on the TAMIYA Volvo FH16 chassis. The original attachment points / screw connections were used for the assembly. No holes need to be drilled manually. The detailed side walls are engraved on both sides with surface engravings and are movably supported in stable hinges. The side walls are "locked" by means of powerful neodymium magnets, two of which are almost invisibly embedded in the side wall. The wooden application included in the conversion kit underlines the detailing of the platform structure and can be aged and adjusted as desired.
- Base frame / subframe made of steel (CNC milled)
- CNC machined aluminum side panels with detailed surface engravings
- The side walls are locked with neodymium magnets
- All 5 side walls are functional
- 5 hinges per side wall
- 4 hinges on the tailgate
- Real wood floor application
- Dim. (lxwxh): 550x195x130mm
- side wall height 75mm
- Weight: approx.2.4kg
Attention! Not suitable for children under 14 years.
item code: 907509
Fittingset for 2-axle stanchion trailer
incl. 19% VAT
plus Shipping
Fittingset for 2-axle stanchion trailer
This optional accessory set is available to refine the 2-axle stanchion trailer.
The scope of delivery includes: a spare wheel (wide chrome rim with wide tires), aluminum spare wheel holder, 2 aluminum compressed air tanks (made of solid aluminum) and a lashing kit.
If you need additional lashing sets for your transport project / load securing, these are listed under item no. 907450 sold separately.
Attention! Not suitable for children under 14 years.
item code: 907623
RECATULAR SPOTLIGHT 12VOLT
incl. 19% VAT
plus Shipping
RECATULAR SPOTLIGHT, scale 1/14, with lighting board 12 Volt, , housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Item code : 907578
7 – chamber LED board 12 Volt
incl. 19% VAT
plus Shipping
7 – chamber LED board 7,2 Volt
incl. 19% VAT
plus Shipping
Alu front wheel wide round hole
incl. 19% VAT
plus Shipping
License plate light, scale 1/14
incl. 19% VAT
plus Shipping
Related products
3-axle-stanchion-trailer 1/16
incl. 19% VAT
plus Shipping
3-axle-stanchion-trailer, 1/16 scale, kit, unpainted,
Product details:
- Rigid steel frame in sandwich construction (3 mm and 1 mm steel, laser-cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball-bearing mounted
- Mechanical trailer supports, pre-prepared for electric drive (gear motors not included in the kit)
- CNC-machined aluminium stanchions, infinitely adjustable, secured with clamps
- Solid aluminium front panel
- Steel underrun protection (left/right)
- Single-arm steel spare wheel holder with spare wheel
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Saddle height 90 – 100 mm
Weight 4,500 g
Warning! Not suitable for children under 14 years of age.
item code: 251060
Draw Tube extens. Pole Trailer (56310)
incl. 19% VAT
plus Shipping
Draw Tube extens. Pole Trailer, scale 1/14, suitable for Tamiya telescopic semi-trailer (56310), metal kit
Product details:
Euro bumper with 7-chamber rear lights and number plate holder
Aluminium drawbar extension, easy to replace
For transporting goods up to a length of 1200 mm
Warning! Not suitable for children under 14 years of age.
item code: 907733
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
2-axle trailer
incl. 19% VAT
plus Shipping
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed
- Drop sides made of injection molded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tires
- Bracket with spare tire
- Platform with real wooden floor
- Tail lights with license plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
2-axis Dump Trailer
incl. 19% VAT
plus Shipping
2-axis Dump Trailer, 1/14 scale, fits the Arocs tipper Tamiya
Technical details:
• Kit
• Steel profile frame (laser cut and welded)
• Trough made of hard PVC (gray)
• 8-way ball-bearing wheels
• Fulda Variotonn off-road tires
• 7-chamber taillights
• Semitrailer axles with air spring dummies
• Automatic 2-hook rear panel lock
Length: 570mm, width: 190mm, height: 200mm, weight: 3.000g
item code: 907425
Attention! Not suitable for children under 14 years.
Goldhofer TU4 flatbed trailer
incl. 19% VAT
plus Shipping
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
Goldhofer Heavy-Loader BAU STN-L3
incl. 19% VAT
plus Shipping
DUMP TRUCK 3-AXLE TRAILER
incl. 19% VAT
plus Shipping


Reviews
There are no reviews yet.