2-Axle Material Trailer
575,00 €
incl. 19% VAT plus Shipping
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
– Torsion-resistant steel frame in sandwich construction
– Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
– Bogie made of sheet steel in sandwich construction
– Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
– Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
– The drawbar is held by two tension springs for easier attachment
– Coupling height 75 mm
– CNC milled aluminum side panels with detailed surface engravings
– The side walls are locked by neodymium magnets
– All 5 drop sides are functional
– 5 hinges per side wall
– 4 hinges on the rear drop side
– Real wood floor application
– Chrome rims with ball bearings and wide tires
– Solid underrun protection made of steel (left / right)
– Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
– Mudguards with splash guards
– Bumper rag set
– CNC machined aluminum rear bumper
– Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
item code: 907624
Attention! Not suitable for children under 14 years.
In stock
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
– Torsion-resistant steel frame in sandwich construction
– Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
– Bogie made of sheet steel in sandwich construction
– Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
– Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
– The drawbar is held by two tension springs for easier attachment
– Coupling height 75 mm
– CNC milled aluminum side panels with detailed surface engravings
– The side walls are locked by neodymium magnets
– All 5 drop sides are functional
– 5 hinges per side wall
– 4 hinges on the rear drop side
– Real wood floor application
– Chrome rims with ball bearings and wide tires
– Solid underrun protection made of steel (left / right)
– Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
– Mudguards with splash guards
– Bumper rag set
– CNC machined aluminum rear bumper
– Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
Attention! Not suitable for children under 14 years.
| Weight | 4,5 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Building material platform short for tractors
incl. 19% VAT
plus Shipping
Building material platform short for tractors, scale 1/14, suitable for the Tamiya Volvo FH16 timber transporter. A wood transporter can be converted into a building material transporter in no time at all. The basis of this platform structure is a steel frame with an integrated subframe for mounting on the TAMIYA Volvo FH16 chassis. The original fastening points / screw connections were used for the assembly. There is no need to drill holes manually. The detailed side walls are provided with surface engravings on both sides and are movably mounted in stable hinges. The side walls are "locked" by means of powerful neodymium magnets, two pieces are almost invisibly embedded in the side wall. The wooden application contained in the conversion kit underlines the detailing of the platform structure and can be aged and adjusted according to your own requirements.
- Base support / subframe made of steel (CNC milled)
- CNC milled side walls made of aluminum, with detailed surface engravings
- The drop sides are locked with neodymium magnets
- All 4 drop sides are functional
- 3 hinges per side wall
- Real wood floor application
- Dim. (lxwxh): 440x195x130mm
- Drop side height 75mm
- Weight: approx. 2.3kg Danger
Attention! Not suitable for children under 14 years.
item code: 907510
Construction platform long
incl. 19% VAT
plus Shipping
Construction platform long, scale 1/14, suitable for the Tamiya Volvo FH16 timber transporter.
Converted a timber transporter into a building material transporter in no time at all.
The basis of this platform construction is a steel frame with an integrated subframe for mounting on the TAMIYA Volvo FH16 chassis. The original attachment points / screw connections were used for the assembly. No holes need to be drilled manually. The detailed side walls are engraved on both sides with surface engravings and are movably supported in stable hinges. The side walls are "locked" by means of powerful neodymium magnets, two of which are almost invisibly embedded in the side wall. The wooden application included in the conversion kit underlines the detailing of the platform structure and can be aged and adjusted as desired.
- Base frame / subframe made of steel (CNC milled)
- CNC machined aluminum side panels with detailed surface engravings
- The side walls are locked with neodymium magnets
- All 5 side walls are functional
- 5 hinges per side wall
- 4 hinges on the tailgate
- Real wood floor application
- Dim. (lxwxh): 550x195x130mm
- side wall height 75mm
- Weight: approx.2.4kg
Attention! Not suitable for children under 14 years.
item code: 907509
Fittingset for 2-axle stanchion trailer
incl. 19% VAT
plus Shipping
Fittingset for 2-axle stanchion trailer
This optional accessory set is available to refine the 2-axle stanchion trailer.
The scope of delivery includes: a spare wheel (wide chrome rim with wide tires), aluminum spare wheel holder, 2 aluminum compressed air tanks (made of solid aluminum) and a lashing kit.
If you need additional lashing sets for your transport project / load securing, these are listed under item no. 907450 sold separately.
Attention! Not suitable for children under 14 years.
item code: 907623
RECATULAR SPOTLIGHT 12VOLT
incl. 19% VAT
plus Shipping
RECATULAR SPOTLIGHT, scale 1/14, with lighting board 12 Volt, , housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Item code : 907578
7 – chamber LED board 12 Volt
incl. 19% VAT
plus Shipping
7 – chamber LED board 7,2 Volt
incl. 19% VAT
plus Shipping
Alu front wheel wide round hole
incl. 19% VAT
plus Shipping
License plate light, scale 1/14
incl. 19% VAT
plus Shipping
Related products
Flatbed trailer III made of steel
incl. 19% VAT
plus Shipping
Flatbed trailer III, scale 1/14 Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid aluminum front wall
- Detailed trailer axles with dummy air springs, optionally with a +8mm lift
- Solid steel underride protection (left/right)
- Steel spare wheel holder with spare wheel
- Chrome rims with ball bearings and wide road tires
- 7-chamber taillights and license plate
- holder included 16 lashing eyes
- Real wood floor application
- 8mm aluminum bumper
- detailed assembly instructions + decal sheet
Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g
Item No. 907650
Caution! Not suitable for children under the age of 14.
2-axis Dump Trailer
incl. 19% VAT
plus Shipping
2-axis Dump Trailer, 1/14 scale, fits the Arocs tipper Tamiya
Technical details:
• Kit
• Steel profile frame (laser cut and welded)
• Trough made of hard PVC (gray)
• 8-way ball-bearing wheels
• Fulda Variotonn off-road tires
• 7-chamber taillights
• Semitrailer axles with air spring dummies
• Automatic 2-hook rear panel lock
Length: 570mm, width: 190mm, height: 200mm, weight: 3.000g
item code: 907425
Attention! Not suitable for children under 14 years.
2-axle dolly rigid for Gigaliners
incl. 19% VAT
plus Shipping
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers.
- steel frame (laser cut and welded)
- 7 chamber taillights
- 8-way ball-bearing wheels
- Air spring dummies
- Saddle plate made of plastic
- Tiller made of aluminum, adjustable in length and height
Technical specifications:
Length: 365mm
Width: approx. 195mm
Height: about 85mm
item code : 907210
Warning! Not suitable for children under 14 years.
2-axle dump truck semi-trailer
incl. 19% VAT
plus Shipping
2-axle dump truck semi-trailer, Tamiya scale, kit, tailgate with automatic 2-hook lock
- Trough and rear wall made of hard PVC, milled
- Air spring dummies
- Aluminum chassis, milled
- 8 times ball-bearing
- 4 semi-trailer rims, wide
- 4 wide tires
- 7-chamber taillights (without bulbs)
- license plate (illuminated)
- Plastic mudguards with holders
- Latch tailgate
- Aluminum underrun protection, milled
- Semi-trailer props, mechanically adjustable
- Pedestal aluminum / plastic
- Hydraulic cylinder dummy
item code : 907312
Warning! Not suitable for children under 14 years.
3-axle Fliegl Megarunner
incl. 19% VAT
plus Shipping
3-axle Fliegl Megarunner, in the Tamiya scale, kit, new aluminum door hinges with 270 ° opening angle, new door locks
The kit contains no painted parts
- Air spring dummies on all 3 axes
- steel frame, (laser cut)
- Tarpaulin red with Fliegl logo
- 6 semi-trailer rims, wide, chrome + 6 wide tires
- Wheels are 12 ball bearings
- 7-chamber taillights (without bulbs)
- Underride protection made of steel
- license plate (illuminated)
- Plastic mudguards with brackets
- Semi-trailer bumper with lasered Fliegl logo
- Semi-trailer props, mechanically height adjustable
- Spare wheel holder one-armed
- Detailed construction manual
Dimensions: 995x195x270mm Weight 6.000 gr. Max.load 10kg.
item code : 907235
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Goldhofer Heavy-Loader BAU STN-L3
incl. 19% VAT
plus Shipping
Liebherr LR 634 track loader
incl. 19% VAT
plus Shipping
Liebherr LR 634 Track Loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale.
item code: 907111


Reviews
There are no reviews yet.