1/14 Steered low loader axle
105,00 €
incl. 19% VAT plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
In stock
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
| Weight | 0,240 kg |
|---|---|
| Dimensions | 16 × 11 × 8 cm |
Product safety
You must be logged in to post a review.
You may also like…
Servo bracket set steering axle GH
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
Related products
Intermediate bearing block
incl. 19% VAT
plus Shipping
Intermediate bearing block, suitable for extra-long cardan shafts with an installation length of 165 mm to 330 mm, compatible with our cardan shafts, item nos. 251260 to 251287, double ball bearing, 5 mm steel shaft, total width 62 mm, height 15 mm, thickness 8 mm, shaft length 26 mm, contents: 1 bearing block, mounting screws
Warning! Not suitable for children under 14 years of age.
item code: 251240
Rear light set FH16 XL750 (4×2)
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 XL750 (4×2), from 7.2 to 12 volts, true to original light functions and look of the tail lights with the following functions: Brake light, reversing light, fog light, parking light, blinker l+r, cable length approx. 55cm, contents: 1 set of housing with built-in circuit board
Attention : Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907702
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
Trailer axle with lift kit + 8mm
incl. 19% VAT
plus Shipping
Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions
Item No. 907643
Caution! Not suitable for children under 14 years of age.
Pivoted bogie with axle
incl. 19% VAT
plus Shipping
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions
Technical details:
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber
-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm- Trailer axle with dummy air suspensionDanger!
Attention! Not suitable for children under 14 years.
item code: 907625
1/14 driven front axle with self-locking differential
incl. 19% VAT
plus Shipping
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
1/14 Rear axle w/Diff.-Lock&fixed drive
incl. 19% VAT
plus Shipping
1/14 Rear axle w/Diff.-Lock&fixed drive
Official licensed by ZF Friedrichshafen AG.
The CARSON drive concept for TAMIYA trucks in 1:14 scale
Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A huge advantage of these axles is that there is no need for additional space for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically when there is a traction loss. Officially licensed by ZF Friedrichshafen AG.
- Detailed rear axle
- Reinforced plastic axle housing
- High ground clearance thanks to a slim? Differential housing (height 33 mm)
- 12-way ball bearing
- Hardened steel bevel gears
- axle ratio 1: 2,66
- 5 mm transmission / input shaft
- Aluminum rim driver 12 mm hexagon
- Easy conversion to the axle with and without drive (both shafts and housing covers are included in the axle kit)
- Dimensions rear axle LxBxH: 44 x 135 x 33 mm
- Weight approx. 150 g
- Delivered as kit with pre-assembled differential
- Suitable for TAMIYA suspension and independent suspension
- Suitable for all TAMIYA and CARSON truck rims with 12 mm hexagonal driver
- Self-locking differential (shifter servo, linkages and Bowden cables are not required)
item code 907268
Reviews
There are no reviews yet.