Red curtains set
Red curtains set, scale 1/14, suitable for the Carson models Art.No. 907005 curtain side trailer I, Art.No. 907080 curtain side trailer II and item no. 907235 Fliegl Megarunner, the curtains are not printed, content: 1 curtains left, 1 curtains right
item code: 18361
Caution! Not suitable for children under 14 years of age.
White curtains set
White curtains set, scale 1/14, suitable for the Carson models Art.No. 907005 curtain side trailer I, Art.No. 907080 curtain side trailer II and item no. 907235 Fliegl Megarunner, the curtains are not printed, content: 1 curtains left, 1 curtains right
item code: 18360
Caution! Not suitable for children under 14 years of age.
Pivoted bogie with axle
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions
Technical details:
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber
-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm- Trailer axle with dummy air suspensionDanger!
Attention! Not suitable for children under 14 years.
item code: 907625
2-Axle Material Trailer
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm
- CNC milled aluminum side panels with detailed surface engravings
- The side walls are locked by neodymium magnets
- All 5 drop sides are functional
- 5 hinges per side wall
- 4 hinges on the rear drop side
- Real wood floor application
- Chrome rims with ball bearings and wide tires
- Solid underrun protection made of steel (left / right)
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
- Mudguards with splash guards
- Bumper rag set
- CNC machined aluminum rear bumper
- Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
item code: 907624
Attention! Not suitable for children under 14 years.
Rear light board with housing Volvo FH16 tow truck
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 tow truck, from 7.2 to 12 volts, the following light functions: rear light with position light, left and right indicators, reversing light, fog light and brake light, metal rear light mask, cable length approx. 80cm, content: 1 right rear light, 1 left rear light, 2 metal rear light masks, tape, instructions
Attention! Not suitable for children under 14 years.
item code: 907632
Towing bar trailer
Towing bar trailer, scale 1/14, made of reinforced plastic, one-piece, for self-construction or as a spare part suitable for the trailer Art.No. 907622 and 907624, dimensions: length 180mm, width 90mm, height 6mm, content: 1 drawbar, 2 tension springs
Attention! Not suitable for children under 14 years.
item code: 907626
Towing bar Low loader TU4
Towing bar Low loader TU4, scale 1/14, made of reinforced plastic, one-piece, for self-construction or as a spare part suitable for the Goldhofer TU4 low-loader trailer Art.No. 907400, dimensions: length 120mm, width 75mm, height 25mm, content: 1 drawbar
Attention! Not suitable for children under 14 years.
item code: 907627
Ramp set Low loader GH TU4
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
3-AXLE STANCHION TRAILER III, NEW SUSP.
3-AXLE STANCHION TRAILER III, NEW SUSP. The new 3-axle stanchion trailer from CARSON for transporting logs or similar long loads is a perfect addition to the TAMIYA tractors. The basis for the trailer is a newly developed torsion-resistant frame (sandwich construction) made of 3 and 1 mm laser-cut sheet steel. A new suspension is also included, this can optionally be raised by 8 mm and thus balances the level of the saddle to a higher tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. Depending on the load and requirements, the six aluminum stanchions can be steplessly positioned on the chassis or removed. These are loosened or fixed using the two countersunk grub screws. A massive steel front wall secures the load to the front of the tractor. Two work lights can be optionally mounted on the front wall and also on the rear frame, the fixings are already provided. A stable underrun protection and a spare wheel holder made of steel complete the detailing of the model.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid steel front wall
- Stakes (one-piece) milled from solid aluminum
- The stanchion bracket can be loosened using two grub screws and repositioned or removed as required.
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm - Solid underrun protection made of steel (left / right)
- One-arm spare wheel holder made of steel with spare wheel
- Chrome rims with ball bearings and wide off-road tires
- 7-chamber taillights and license plate holder included
- Decor set, detailed building instructions
Dimensions: LxWxH: 980 x 190 x 310 mm, weight: 5,100 g
Attention! Not suitable for children under 14 years.
item code: 907629
Cardan shaft 6 / 6
Cardan shaft 5 / 5
Cardan shaft 4 / 4
Nut protection ring
Building material platform short for tractors
Building material platform short for tractors, scale 1/14, suitable for the Tamiya Volvo FH16 timber transporter. A wood transporter can be converted into a building material transporter in no time at all. The basis of this platform structure is a steel frame with an integrated subframe for mounting on the TAMIYA Volvo FH16 chassis. The original fastening points / screw connections were used for the assembly. There is no need to drill holes manually. The detailed side walls are provided with surface engravings on both sides and are movably mounted in stable hinges. The side walls are "locked" by means of powerful neodymium magnets, two pieces are almost invisibly embedded in the side wall. The wooden application contained in the conversion kit underlines the detailing of the platform structure and can be aged and adjusted according to your own requirements.
- Base support / subframe made of steel (CNC milled)
- CNC milled side walls made of aluminum, with detailed surface engravings
- The drop sides are locked with neodymium magnets
- All 4 drop sides are functional
- 3 hinges per side wall
- Real wood floor application
- Dim. (lxwxh): 440x195x130mm
- Drop side height 75mm
- Weight: approx. 2.3kg Danger
Attention! Not suitable for children under 14 years.
item code: 907510
Volvo Underr.guard w/Tailight mount Tamiya Volvo FH16
Volvo Underr.guard w/Tailight mount Tamiya Volvo FH16, Scale 1/14, made of aluminum, with taillight holder, dim .: width 175mm, height approx. 50mm, is for a conversion to the building material plateau item no. 907509 required, contents: 1 underride guard, 2 taillight holders, fastening screws
item code: 907515
Warning! Not suitable for children under 14 years.
Construction platform long
Construction platform long, scale 1/14, suitable for the Tamiya Volvo FH16 timber transporter.
Converted a timber transporter into a building material transporter in no time at all.
The basis of this platform construction is a steel frame with an integrated subframe for mounting on the TAMIYA Volvo FH16 chassis. The original attachment points / screw connections were used for the assembly. No holes need to be drilled manually. The detailed side walls are engraved on both sides with surface engravings and are movably supported in stable hinges. The side walls are "locked" by means of powerful neodymium magnets, two of which are almost invisibly embedded in the side wall. The wooden application included in the conversion kit underlines the detailing of the platform structure and can be aged and adjusted as desired.
- Base frame / subframe made of steel (CNC milled)
- CNC machined aluminum side panels with detailed surface engravings
- The side walls are locked with neodymium magnets
- All 5 side walls are functional
- 5 hinges per side wall
- 4 hinges on the tailgate
- Real wood floor application
- Dim. (lxwxh): 550x195x130mm
- side wall height 75mm
- Weight: approx.2.4kg
Attention! Not suitable for children under 14 years.
item code: 907509
1/16 rear rim adapter for single tires
1/16 rear rim adapter for single tires, made of aluminum, suitable for the rear axle Art.No. 251210, with 2 bolt circles 21/22 mm, thread M1.6mm, hub cover with O-ring for easy dismantling, content: 2 rim adapters, 2 hub covers, 2 O-rings, 20 cap screws M1.6x4mm, suitable for our plastic and aluminum rims
Attention! Not suitable for children under 14 years.
item code: 220961
Cardan Shaft 135-165mm 6/5mm
Cardan Shaft 95-125mm 6/5mm
Cardan Shaft 73-101mm 6/5mm
Cardan Shaft 52-62mm 6/5mm
Cardan Shaft 48-54mm 6/5mm
Cardan Shaft 45-50mm 6/5mm
VOLVO FH16 REAR LIGHT
Volvo FH16 rear light, scale 1/14, suitable for the Volvo FH16 from Tamiya, from 7.2 to 12 volts, true-to-original light functions and look of the rear lights with the following functions: brake light, reversing light, fog light, parking light, indicator l + r, cable length approx 75cm, content: 1 set of housings with built-in circuit board
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907508