Plast. Parts Trailersus. w/8mm lift
29,99 €
incl. 19% VAT plus Shipping
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
item code: 907644
Caution! Not suitable for children under 14 years of age.
In stock
Description
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
Caution! Not suitable for children under 14 years of age.
Additional information
| Weight | 0,070 kg |
|---|---|
| Dimensions | 26 × 12 × 3 cm |
Product safety
Product safety
Shipping & Delivery
Related products
Rear light board with housing Volvo FH16 tow truck
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 tow truck, from 7.2 to 12 volts, the following light functions: rear light with position light, left and right indicators, reversing light, fog light and brake light, metal rear light mask, cable length approx. 80cm, content: 1 right rear light, 1 left rear light, 2 metal rear light masks, tape, instructions
Attention! Not suitable for children under 14 years.
item code: 907632
3-AXLE STANCHION TRAILER III, NEW SUSP.
incl. 19% VAT
plus Shipping
3-AXLE STANCHION TRAILER III, NEW SUSP. The new 3-axle stanchion trailer from CARSON for transporting logs or similar long loads is a perfect addition to the TAMIYA tractors. The basis for the trailer is a newly developed torsion-resistant frame (sandwich construction) made of 3 and 1 mm laser-cut sheet steel. A new suspension is also included, this can optionally be raised by 8 mm and thus balances the level of the saddle to a higher tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. Depending on the load and requirements, the six aluminum stanchions can be steplessly positioned on the chassis or removed. These are loosened or fixed using the two countersunk grub screws. A massive steel front wall secures the load to the front of the tractor. Two work lights can be optionally mounted on the front wall and also on the rear frame, the fixings are already provided. A stable underrun protection and a spare wheel holder made of steel complete the detailing of the model.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid steel front wall
- Stakes (one-piece) milled from solid aluminum
- The stanchion bracket can be loosened using two grub screws and repositioned or removed as required.
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm - Solid underrun protection made of steel (left / right)
- One-arm spare wheel holder made of steel with spare wheel
- Chrome rims with ball bearings and wide off-road tires
- 7-chamber taillights and license plate holder included
- Decor set, detailed building instructions
Dimensions: LxWxH: 980 x 190 x 310 mm, weight: 5,100 g
Attention! Not suitable for children under 14 years.
item code: 907629
1/14 Tire insert 15mm
incl. 19% VAT
plus Shipping
Tire insert 15mm, scale 1/14, suitable for the tires 907011, 907014 and for the original Tamiya tires in a narrow design, made of cellular rubber (medium strength), this keeps the truck tire in shape and gives additional stability. Depending on the load, the better walking behavior on road and off-road courses is noticeable through higher traction. Can be used for all TAMIYA tractors, semitrailers and trailers with narrow tires. Contents: 2 tire inserts 15mm
Attention! Not suitable for children under 14 years.
item code: 907516
1/14 driven front axle with self-locking differential
incl. 19% VAT
plus Shipping
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
Flat bed axle with bellow dummys
incl. 19% VAT
plus Shipping
Flat bed axle with bellow dummys, scale 1/14, kit from boosted fiber glass-plastik,axle shaft from metal, track width with tires 190mm, to need a width of frame from 76mm, diameter of the wheel axle 5mm, shipment from the kit include are 1 axle with fixing parts and construction manual
Item code : 907140
