Roxxy brushless motor
75,90 €
incl. 19% VAT plus Shipping
Roxxy brushless motor, for 1/8 scale, compatible with the 2-speed manual gearbox (item no. 220350), with an adapter plate for easy mounting on the gearbox, 1,100 rpm per volt, motor shaft 5 mm, motor power 680 watts, operating voltage 12 volts, milled aluminium adapter plate, contents: 1 brushless motor, 1x adapter plate, mounting hardware, instructions
Warning! Not suitable for children under 14 years of age.
item code: 220355
In stock
Roxxy brushless motor, for 1/8 scale, compatible with the 2-speed manual gearbox (item no. 220350), with an adapter plate for easy mounting on the gearbox, 1,100 rpm per volt, motor shaft 5 mm, motor power 680 watts, operating voltage 12 volts, milled aluminium adapter plate, contents: 1 brushless motor, 1x adapter plate, mounting hardware, instructions
Warning! Not suitable for children under 14 years of age.
You must be logged in to post a review.
You may also like…
2-speed manual gearbox
incl. 19% VAT
plus Shipping
2-speed manual gearbox, for 1/8 scale, very powerful, designed for brushless motor item no. 220355, suitable only for planetary shafts, total reduction ratio 1st gear 20:1, 2nd gear 10:1, flanged planetary stage with a reduction ratio of 10:1, for 5mm motor shafts, shifting via servo is possible whilst driving, housing and carrier milled from aluminium, output shaft SW5, 3-ball bearing, shafts and gears hardened, input speed max. 12,000 rpm, shift rod and mounting hardware included, Contents: 1 gearbox with planetary stage, mounting parts
Warning! Not suitable for children under 14 years of age.
item code: 220350
Related products
Rear light set FH16 XL750 (4×2)
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 XL750 (4×2), from 7.2 to 12 volts, true to original light functions and look of the tail lights with the following functions: Brake light, reversing light, fog light, parking light, blinker l+r, cable length approx. 55cm, contents: 1 set of housing with built-in circuit board
Attention : Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907702
Gear motor for low bed low loader
incl. 19% VAT
plus Shipping
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
item code : 907703
Servo bracket set steering axle low loader
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson lowbed low loader Art. no. 907700, steel holders, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907701
1/16 Steered low-loader axle
incl. 19% VAT
plus Shipping
Steered low-loader axle, scale 1/16, very sturdy design, axle parts made of hardened steel, aluminum linkages, steering heads with plain bearings, wheel studs Ø 5mm, track width adjustable between 163 and 165mm, steering angle up to a maximum of 45° possible, steering rod for connecting additional steel axles with M3 ball joints, two different hole patterns for adapting the leaf springs to the frame width, weight approx. 110g, total length: 142.5mm, height: 18.5mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 251225
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
Transfercase for 4-wheel drive
incl. 19% VAT
plus Shipping
Transfercase for 4-wheel drive, support set, the front axle can be connect with a servo, the output shaft have a diameter from 5mm and be feature with 4 ball bearings, speed reduction 2:1, this set is suitable for the 3-gear with item code 251100, instruction and fixing parts are included
Item code 251180
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.