7.4V/2600mAh Li-ion battery
19,99 € 17,99 €
incl. 19% VAT plus Shipping
7.4V/2600mAh Li-ion battery, fitted with a T-plug connector and XHP balancer, suitable for the Büssing S8000 S13 (item no. 251000) when used in conjunction with the lighting set (item no. 251002) or for the LR 634 loading caterpillar (item no. 907111), Contents: 1 Li-ion battery
Warning! Not suitable for children under 14 years of age.
item code: 608308
In stock
7.4V/2600mAh Li-ion battery, fitted with a T-plug connector and XHP balancer, suitable for the Büssing S8000 S13 (item no. 251000) when used in conjunction with the lighting set (item no. 251002) or for the LR 634 loading caterpillar (item no. 907111), Contents: 1 Li-ion battery
Warning! Not suitable for children under 14 years of age.
| Weight | 0,110 kg |
|---|---|
| Dimensions | 15 × 10 × 2 cm |
You must be logged in to post a review.
You may also like…
Lighting set for the Büssing 8000 S13
incl. 19% VAT
plus Shipping
Lighting set for the Büssing 8000 S13
consisting of:
1x electronic unit with the following features:
Toggle switch for switching the power supply on and off
battery connection cable with T-plug
terminal strips for the connection of the different lighting boards
Servo cable for the connection to the receiver (switching functions)
Plug connection for connecting the socket at the rear (trailer)
Switching functions: parking light, low beam, high beam, fog light, rear lights
Brake light function via the output from the speed controller (S10 from Servonaut)
Transmission of the rear and brake light function to the trailer (socket)
2x lighting boards for the main headlight with reflector (warm glowing)
2x lighting boards for the fog lights (yellow shining)
2x lighting boards for the rear lights (red shining)
1x cable set with plug connection for the transmission of the light functions to the trailer (socket with holder)
item code: 251002
Attention. Not suitable for children under 14 years.
Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
Related products
Conv. Box Body for Tractor Vol.FH16 (56360)
incl. 19% VAT
plus Shipping
Conv. Box Body, scale 1/14, suitable for Tamiya Volvo FH16 (56360), metal kit
Product details:
Box body made of CNC-milled aluminium parts
Subframe made of sheet steel, laser-cut and CNC-bent
Plastic side panels screwed together in a sandwich design
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Dimensions: LxWxH: 545 x 195 x 195 mm
Total weight: 3,200 g
Warning! Not suitable for children under 14 years of age.
item code: 907732
2-axle boxed trailer
incl. 19% VAT
plus Shipping
2-axle boxed trailer, scale 1/14, suitable for Volvo FH16 (56360), metal kit
Product details:
Torsion-resistant steel frame in sandwich construction
Frame made of 3 and 1 mm sheet steel, laser-cut and CNC-bent
Steel sheet bogie in sandwich construction
Bearing bogie (adjustable) with sliding pads for easy manoeuvring
Drawbar (one-piece) made of fibre-reinforced plastic with chequer plate application
The drawbar is held in place by two tension springs for easier coupling
Coupling height 75 mm
Box body made of CNC-milled aluminium parts
Plastic side panels screwed on in sandwich look
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Ball-bearing chrome rims with wide tyres
Solid steel underride guard (left/right)
Detailed semi-trailer axles with dummy air springs, optionally with + 8 mm lift (kit contains both versions with/without lift)
Mudguards with splash guards
Bumper mud flap set
CNC-milled aluminium rear bumper
Decor set, detailed assembly instructions
Dimensions: LxWxH: 545 x 195 x 290 mm
Total weight: 4,800 g
Warning! Not suitable for children under 14 years of age.
item code: 907731
Intermediate bearing block
incl. 19% VAT
plus Shipping
Intermediate bearing block, suitable for extra-long cardan shafts with an installation length of 165 mm to 330 mm, compatible with our cardan shafts, item nos. 251260 to 251287, double ball bearing, 5 mm steel shaft, total width 62 mm, height 15 mm, thickness 8 mm, shaft length 26 mm, contents: 1 bearing block, mounting screws
Warning! Not suitable for children under 14 years of age.
item code: 251240
Gear motor for low bed low loader
incl. 19% VAT
plus Shipping
Gear motor for low-bed low-loader, rated voltage 7.2 Volt, idling speed 136 rpm, continuous current 1.35A, peak torque 688mNm, reduction ratio 110:1, weight 88g, dimensions: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3, content : 1 gear motor
Attention! Not suitable for children under 14 years.
item code : 907703
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
Servo bracket set steering axle GH
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
1/14 Steered low loader axle
incl. 19% VAT
plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
Reviews
There are no reviews yet.