7-chamber rear light with clearance light 7.2V
75,90 €
incl. 19% VAT plus Shipping
7-chamber rear light with clearance light and 7.2-volt lighting board, suitable for 1/16 – 1/14.5 scale models, pre-assembled and ready to connect, clearance light made of flexible rubber, white and red LEDs, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive terminal, 4 light functions: indicator, tail light + clearance light, brake light and reversing light, cable length approx. 60 cm, dimensions: LxWxH: 51x12x7 mm, contents: 1 left rear light, 1 right rear light, instructions
Warning! Not suitable for children under 14 years of age.
item code: 191523
In stock
7-chamber rear light with clearance light and 7.2-volt lighting board, suitable for 1/16 – 1/14.5 scale models, pre-assembled and ready to connect, clearance light made of flexible rubber, white and red LEDs, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive terminal, 4 light functions: indicator, tail light + clearance light, brake light and reversing light, cable length approx. 60 cm, dimensions: LxWxH: 51x12x7 mm, contents: 1 left rear light, 1 right rear light, instructions
Warning! Not suitable for children under 14 years of age.
| Weight | 0,015 kg |
|---|---|
| Dimensions | 13 × 7 × 1 cm |
You must be logged in to post a review.
Related products
Rear light for trailers
incl. 19% VAT
plus Shipping
Rear light for trailers, scale 1/16 to 1/14.5, new design, with lighting circuit board, from 6 to 13.5 volts, light functions: parking light, brake light, indicator l+r, reversing light, fog light, dimensions (lxwxh): 32x12x7mm, cable length 700 mm, contents: 1 pair of rear lights with boards, mounting screws, instructions
Warning! Not suitable for children under 14 years of age.
item code: 191541
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
Ramp set Low loader GH TU4
incl. 19% VAT
plus Shipping
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
6-chamber tail light with lighting board 12 volt
incl. 19% VAT
plus Shipping
6-chamber tail light with lighting board 12 volt, ready-made, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, equipped with SMD LEDs, common positive pole, 5 light functions: turn signal, brake light, Driving light + position light, reversing lamp and fog lamp, cable length approx. 60cm, dim .: LxWxH: 38x11x6,5mm, content: 1 tail light left, 1 tail light right, 4 fixing screws M2x6, instructions
item code: 191532
Warning! Not suitable for children under 14 years
7-chamber tail light with lighting board 12 volts
incl. 19% VAT
plus Shipping
7-chamber tail light with lighting board 12 volts, ready assembled, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive pole, 4 light functions: turn signals, Taillight, brake light and reversing light, cable length approx. 60cm, dim .: LxWxH: 32x12x7mm, content: 1 tail light left, 1 tail light right, 4 fastening screws M2x6, instructions
item code: 191537
Warning! Not suitable for children under 14 years
7-chamber tail light with lighting board 7.2 volts
incl. 19% VAT
plus Shipping
7-chamber tail light with lighting board 7.2 volts, ready assembled, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive pole, 4 light functions: turn signals, Taillight, brake light and reversing light, cable length approx. 60cm, dim .: LxWxH: 32x12x7mm, content: 1 tail light left, 1 tail light right, 4 fastening screws M2x6, instructions
item code: 191536
Warning! Not suitable for children under 14 years
Reviews
There are no reviews yet.