3-axle low loader swan hand/low bed
850,00 €
incl. 19% VAT plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
– Torsion-resistant steel frame (sandwich construction)
– Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
– Low loader axles made of steel with leaf spring assemblies
– Incl. spindle drive for lowering and lifting the low bed
– Solid aluminum lifting device
– Ball bearing mounted plastic rims with double tires (solid rubber)
– Platform with real wood inlay
– Aluminum drive-on ramps
– Storage box with lid (magnetic lock)
– Two storage compartments under the platform for electronic components
– Prepared for the installation of steering axles
– 4 warning signs (adjustable)
– 12 retractable lashing eyes for load securing
– Rotating beacon holder on bracket (suitable for item no. 907579)
– Mud flaps
– Instructions and decal sheet
– Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
– Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
– Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
In stock
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
– Torsion-resistant steel frame (sandwich construction)
– Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
– Low loader axles made of steel with leaf spring assemblies
– Incl. spindle drive for lowering and lifting the low bed
– Solid aluminum lifting device
– Ball bearing mounted plastic rims with double tires (solid rubber)
– Platform with real wood inlay
– Aluminum drive-on ramps
– Storage box with lid (magnetic lock)
– Two storage compartments under the platform for electronic components
– Prepared for the installation of steering axles
– 4 warning signs (adjustable)
– 12 retractable lashing eyes for load securing
– Rotating beacon holder on bracket (suitable for item no. 907579)
– Mud flaps
– Instructions and decal sheet
– Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
– Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
– Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
| Weight | 9,6 kg |
|---|---|
| Dimensions | 102 × 20 × 8 cm |
Product safety
You must be logged in to post a review.
You may also like…
1/14 Steered low loader axle
incl. 19% VAT
plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
RECATULAR SPOTLIGHT 12VOLT
incl. 19% VAT
plus Shipping
RECATULAR SPOTLIGHT, scale 1/14, with lighting board 12 Volt, , housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Item code : 907578
HELLA FLASHING LIGHT ORANGE, FOR VERTICAL MOUNTING
incl. 19% VAT
plus Shipping
Hella flashing light orange, scale 1/14, for vertical mounting, 7 orange SMD's, 4.5 to 13.5 volts, 13 selectable programs, 6-round and 7 flash modes, aluminum housing, 4 different glasses to share information, dim. : Overall height 28mm, diameter 12mm, 4mm diameter pin, cable length 250mm, capacity: 1 Housing with electronics, 4 glasses, instructions
Licensed by Hella
item code : 907579
Related products
3-axle semi-trailer chassis Ver.III
incl. 19% VAT
plus Shipping
3-axle semi-trailer chassis Ver.III, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, laser cut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, ball-bearing chrome rims wide with wide tyres, new axle suspension optionally with lift +8 mm (included), aluminium semi-trailer supports adjustable (manually), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, the kit is supplied unpainted, assembly instructions
Dimensions: length approx. 980 mm, width approx. 190 mm, height approx. 110 mm, weight 3,500 g
Item code: 907730
Attention! Not suitable for children under 14 years.
3-axle box trailer Ver.III white
incl. 19% VAT
plus Shipping
3-axle box trailer Ver.III white, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, lasercut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, wide chrome rims with ball bearings and wide tyres, new axle suspension optionally with height adjustment +8 mm (included), aluminium trailer supports adjustable (manual), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, aluminium box body with plastic side panels in sandwich look (screwed together), aluminium door hinges (270° opening angle), loading door locking with magnets, the kit is supplied unpainted, assembly instructions, decal sheet
Dimensions: length approx. 980 mm, width approx. 195 mm, height approx. 300 mm, weight 7,400 g
item code: 907792
Caution! Not suitable for children under 14 years.
2-axle trailer
incl. 19% VAT
plus Shipping
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed
- Drop sides made of injection molded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tires
- Bracket with spare tire
- Platform with real wooden floor
- Tail lights with license plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
Flatbed trailer III made of steel
incl. 19% VAT
plus Shipping
Flatbed trailer III, scale 1/14 Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid aluminum front wall
- Detailed trailer axles with dummy air springs, optionally with a +8mm lift
- Solid steel underride protection (left/right)
- Steel spare wheel holder with spare wheel
- Chrome rims with ball bearings and wide road tires
- 7-chamber taillights and license plate
- holder included 16 lashing eyes
- Real wood floor application
- 8mm aluminum bumper
- detailed assembly instructions + decal sheet
Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g
Item No. 907650
Caution! Not suitable for children under the age of 14.
3-Axle Heavy Low Loader
incl. 19% VAT
plus Shipping
3-Axle Heavy Low Loader
A successful addition to the various TAMIYA tractors. The ramp can be folded down by hand to drive on.
The kit impresses with the following features:
CNC machined aluminum frame plus king pin
• Height adjustable trailer supports
• 3 axles with twin tires suspended from leaf springs
• ball bearing
• 4-chamber rear lights can be electrically retrofitted.
Suitable for all TAMIYA tractors.
The ramp can be folded down by hand to drive on.
The trailer is equipped with three axles with twin tires. The chassis is suspended with leaf springs. The CNC machined frame is made of aluminum. All supports are mechanically adjustable. The 4-chamber taillights can be electrically retrofitted.
Length: ca. 990 mm, Width:ca. 190 mm, Height: ca. 135mm, Weight:ca .4,5 kg
Attention! Not suitable for children under 14 years.
item code: 907000
Goldhofer TU4 flatbed trailer
incl. 19% VAT
plus Shipping
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
2-axle dolly rigid for Gigaliners
incl. 19% VAT
plus Shipping
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers.
- steel frame (laser cut and welded)
- 7 chamber taillights
- 8-way ball-bearing wheels
- Air spring dummies
- Saddle plate made of plastic
- Tiller made of aluminum, adjustable in length and height
Technical specifications:
Length: 365mm
Width: approx. 195mm
Height: about 85mm
item code : 907210
Warning! Not suitable for children under 14 years.
Reviews
There are no reviews yet.