2-speed manual gearbox
219,00 € 197,10 €
incl. 19% VAT plus Shipping
2-speed manual gearbox, for 1/8 scale, very powerful, designed for brushless motor item no. 220355, suitable only for planetary shafts, total reduction ratio 1st gear 20:1, 2nd gear 10:1, flanged planetary stage with a reduction ratio of 10:1, for 5mm motor shafts, shifting via servo is possible whilst driving, housing and carrier milled from aluminium, output shaft SW5, 3-ball bearing, shafts and gears hardened, input speed max. 12,000 rpm, shift rod and mounting hardware included, Contents: 1 gearbox with planetary stage, mounting parts
Warning! Not suitable for children under 14 years of age.
item code: 220350
In stock
2-speed manual gearbox, for 1/8 scale, very powerful, designed for brushless motor item no. 220355, suitable only for planetary shafts, total reduction ratio 1st gear 20:1, 2nd gear 10:1, flanged planetary stage with a reduction ratio of 10:1, for 5mm motor shafts, shifting via servo is possible whilst driving, housing and carrier milled from aluminium, output shaft SW5, 3-ball bearing, shafts and gears hardened, input speed max. 12,000 rpm, shift rod and mounting hardware included, Contents: 1 gearbox with planetary stage, mounting parts
Warning! Not suitable for children under 14 years of age.
| Dimensions | 15 × 10 × 10 cm |
|---|
You must be logged in to post a review.
You may also like…
Roxxy brushless motor
incl. 19% VAT
plus Shipping
Roxxy brushless motor, for 1/8 scale, compatible with the 2-speed manual gearbox (item no. 220350), with an adapter plate for easy mounting on the gearbox, 1,100 rpm per volt, motor shaft 5 mm, motor power 680 watts, operating voltage 12 volts, milled aluminium adapter plate, contents: 1 brushless motor, 1x adapter plate, mounting hardware, instructions
Warning! Not suitable for children under 14 years of age.
item code: 220355
Related products
Intermediate bearing block
incl. 19% VAT
plus Shipping
Intermediate bearing block, suitable for extra-long cardan shafts with an installation length of 165 mm to 330 mm, compatible with our cardan shafts, item nos. 251260 to 251287, double ball bearing, 5 mm steel shaft, total width 62 mm, height 15 mm, thickness 8 mm, shaft length 26 mm, contents: 1 bearing block, mounting screws
Warning! Not suitable for children under 14 years of age.
item code: 251240
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
Servo bracket set steering axle GH
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
Ramp set Low loader GH TU4
incl. 19% VAT
plus Shipping
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
3-speed gearbox with transfer case and self-locking differential
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
item code: 251106
Warning! Not suitable for children under 14 years.
1/14 Alloy 2-Speed Manual Transmission Compact
incl. 19% VAT
plus Shipping
1/14 Alloy 2-Speed Manual Transmission Compact
This compact 2-speed transmission is designed for use in TAMIYA 2- and 3-axle chassis in conjunction with the 2-speed transfer case. It offers you the possibility to convert or upgrade your model to all-wheel drive. It impresses with its simple installation, as existing bores/threads are used here. The small design allows the installation of the driven front axle (500907267 - front axle installation kit 500907280 is required.) .
Compact 2-speed manual transmission
2-speed: gear ratio 1:11.3 (1st gear) and 1:5.666 (2nd gear)
5-fold ball bearing
CNC machined aluminum housing
Hardened steel gears
Incl. aluminum motor mount for 540 motors (suitable for CARSON and TAMIYA standard and truck motors)
Incl. motor pinion (3,17mm) and mounting material
Easy mounting by using existing holes (2 screws) on the ladder frame
5 mm gearbox/output shaft
The gears are shifted by a micro-servo
Dimension gearbox (o. motor) LxWxH: 47 x 62 x 35 mm
Weight (without motor) approx. 165 g.
Switching servo and 540 motor are not included.
Caution! Not suitable for children under the age of 14.
item code: 907265
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.