2-axle trailer
219,00 €
incl. 19% VAT plus Shipping
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50’s it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
– Milling plates made of polystyrene for frame, bogie and flatbed
– Drop sides made of injection molded parts
– Steel axles with leaf spring suspension
– Trilex – double rims with Fulda Coloss tires
– Bracket with spare tire
– Platform with real wooden floor
– Tail lights with license plate holder
– Towing eye and drawbar made of reinforced plastic
– Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
In stock
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50’s it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
– Milling plates made of polystyrene for frame, bogie and flatbed
– Drop sides made of injection molded parts
– Steel axles with leaf spring suspension
– Trilex – double rims with Fulda Coloss tires
– Bracket with spare tire
– Platform with real wooden floor
– Tail lights with license plate holder
– Towing eye and drawbar made of reinforced plastic
– Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
| Weight | 2,10 kg |
|---|---|
| Dimensions | 60 × 21 × 8 cm |
Product safety
You must be logged in to post a review.
You may also like…
Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
Related products
3-axle Material trailer 1/16
incl. 19% VAT
plus Shipping
3-axle Material trailer, scale 1/16, kit, unpainted
Product details:
- Torsion-resistant steel frame in sandwich construction (3 and 1 mm steel, laser cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball bearings
- Real wood floor application
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Side walls are locked with neodymium magnets
- All 9 side walls are functional
- 4 hinges per side wall (hinges made of 1 mm sheet steel)
- Side wall posts can be removed
- Aluminium front wall
- Steel underride guard (left/right)
- Single-arm steel spare wheel holder with spare wheel
- 16 lashing eyes
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Loading area 941x167mm
Saddle height 90 - 100mm
Weight 5,500g
Warning! Not suitable for children under 14 years of age.
item code: 251050
3-axle trailer
incl. 19% VAT
plus Shipping
3-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1950 had a permissible total weight of 24 tons and was equipped with twin tyres.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-moulded plastic drop sides and is covered with a real wooden floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at coupling height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and number plate holder complete the picture.
Optionally a lighting set is available for the 3-axle trailer art.no. 251006 (not included in the kit).
Technical details:
Total length approx. 635mm, length flatbed approx. 520mm, width approx. 160mm, total height approx. 125mm, weight approx. 1,350g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed.
- Platform gates made of injection moulded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tyres
- Bracket with spare tyres
- Platform with real wood floor
- Rear lights with number plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Attention! Not suitable for children under 14 years.
item code: 251005
2-Axle Material Trailer
incl. 19% VAT
plus Shipping
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm
- CNC milled aluminum side panels with detailed surface engravings
- The side walls are locked by neodymium magnets
- All 5 drop sides are functional
- 5 hinges per side wall
- 4 hinges on the rear drop side
- Real wood floor application
- Chrome rims with ball bearings and wide tires
- Solid underrun protection made of steel (left / right)
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
- Mudguards with splash guards
- Bumper rag set
- CNC machined aluminum rear bumper
- Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
item code: 907624
Attention! Not suitable for children under 14 years.
3-Axle Heavy Low Loader
incl. 19% VAT
plus Shipping
3-Axle Heavy Low Loader
A successful addition to the various TAMIYA tractors. The ramp can be folded down by hand to drive on.
The kit impresses with the following features:
CNC machined aluminum frame plus king pin
• Height adjustable trailer supports
• 3 axles with twin tires suspended from leaf springs
• ball bearing
• 4-chamber rear lights can be electrically retrofitted.
Suitable for all TAMIYA tractors.
The ramp can be folded down by hand to drive on.
The trailer is equipped with three axles with twin tires. The chassis is suspended with leaf springs. The CNC machined frame is made of aluminum. All supports are mechanically adjustable. The 4-chamber taillights can be electrically retrofitted.
Length: ca. 990 mm, Width:ca. 190 mm, Height: ca. 135mm, Weight:ca .4,5 kg
Attention! Not suitable for children under 14 years.
item code: 907000
2-axis Dump Trailer
incl. 19% VAT
plus Shipping
2-axis Dump Trailer, 1/14 scale, fits the Arocs tipper Tamiya
Technical details:
• Kit
• Steel profile frame (laser cut and welded)
• Trough made of hard PVC (gray)
• 8-way ball-bearing wheels
• Fulda Variotonn off-road tires
• 7-chamber taillights
• Semitrailer axles with air spring dummies
• Automatic 2-hook rear panel lock
Length: 570mm, width: 190mm, height: 200mm, weight: 3.000g
item code: 907425
Attention! Not suitable for children under 14 years.
3-axle Fliegl Megarunner
incl. 19% VAT
plus Shipping
3-axle Fliegl Megarunner, in the Tamiya scale, kit, new aluminum door hinges with 270 ° opening angle, new door locks
The kit contains no painted parts
- Air spring dummies on all 3 axes
- steel frame, (laser cut)
- Tarpaulin red with Fliegl logo
- 6 semi-trailer rims, wide, chrome + 6 wide tires
- Wheels are 12 ball bearings
- 7-chamber taillights (without bulbs)
- Underride protection made of steel
- license plate (illuminated)
- Plastic mudguards with brackets
- Semi-trailer bumper with lasered Fliegl logo
- Semi-trailer props, mechanically height adjustable
- Spare wheel holder one-armed
- Detailed construction manual
Dimensions: 995x195x270mm Weight 6.000 gr. Max.load 10kg.
item code : 907235
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Liebherr LR 634 track loader
incl. 19% VAT
plus Shipping
Liebherr LR 634 Track Loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale.
item code: 907111
Reviews
There are no reviews yet.