2-axle trailer
219,00 €
incl. 19% VAT plus Shipping
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50’s it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
– Milling plates made of polystyrene for frame, bogie and flatbed
– Drop sides made of injection molded parts
– Steel axles with leaf spring suspension
– Trilex – double rims with Fulda Coloss tires
– Bracket with spare tire
– Platform with real wooden floor
– Tail lights with license plate holder
– Towing eye and drawbar made of reinforced plastic
– Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
In stock
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50’s it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
– Milling plates made of polystyrene for frame, bogie and flatbed
– Drop sides made of injection molded parts
– Steel axles with leaf spring suspension
– Trilex – double rims with Fulda Coloss tires
– Bracket with spare tire
– Platform with real wooden floor
– Tail lights with license plate holder
– Towing eye and drawbar made of reinforced plastic
– Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
| Weight | 2,10 kg |
|---|---|
| Dimensions | 60 × 21 × 8 cm |
Product safety
You must be logged in to post a review.
You may also like…
Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
Related products
3-axle-semi-trailer chassis 1/16
incl. 19% VAT
plus Shipping
3-axle-semi-trailer chassis, 1/16 scale, kit, unpainted,
Ideal as a base for your own projects and ideas.
Product details:
Rigid steel frame in sandwich construction (3 mm and 1 mm steel, laser-cut)
SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
Aluminium rims with Fulda Multitonn II wide tyres, ball-bearing mounted
Mechanical trailer supports, pre-prepared for electric drive (gear motors not included in the kit)
Steel underrun protection (left/right)
Single-arm steel spare wheel holder with spare wheel
Mud flaps
Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 90 mm
Saddle height 90 – 100 mm
Weight 3,500 g
Warning! Not suitable for children under 14 years of age.
item Code: 251040
3-axle Material trailer 1/16
incl. 19% VAT
plus Shipping
3-axle Material trailer, scale 1/16, kit, unpainted
Product details:
- Torsion-resistant steel frame in sandwich construction (3 and 1 mm steel, laser cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball bearings
- Real wood floor application
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Mechanical trailer supports, already prepared for electric drive (gear motors not included in kit)
- Side walls are locked with neodymium magnets
- All 9 side walls are functional
- 4 hinges per side wall (hinges made of 1 mm sheet steel)
- Side wall posts can be removed
- Aluminium front wall
- Steel underride guard (left/right)
- Single-arm steel spare wheel holder with spare wheel
- 16 lashing eyes
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Loading area 941x167mm
Saddle height 90 - 100mm
Weight 5,500g
Warning! Not suitable for children under 14 years of age.
item code: 251050
Draw Tube extens. Pole Trailer (56310)
incl. 19% VAT
plus Shipping
Draw Tube extens. Pole Trailer, scale 1/14, suitable for Tamiya telescopic semi-trailer (56310), metal kit
Product details:
Euro bumper with 7-chamber rear lights and number plate holder
Aluminium drawbar extension, easy to replace
For transporting goods up to a length of 1200 mm
Warning! Not suitable for children under 14 years of age.
item code: 907733
3-axle trailer
incl. 19% VAT
plus Shipping
3-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1950 had a permissible total weight of 24 tons and was equipped with twin tyres.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-moulded plastic drop sides and is covered with a real wooden floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at coupling height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and number plate holder complete the picture.
Optionally a lighting set is available for the 3-axle trailer art.no. 251006 (not included in the kit).
Technical details:
Total length approx. 635mm, length flatbed approx. 520mm, width approx. 160mm, total height approx. 125mm, weight approx. 1,350g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed.
- Platform gates made of injection moulded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tyres
- Bracket with spare tyres
- Platform with real wood floor
- Rear lights with number plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Attention! Not suitable for children under 14 years.
item code: 251005
2-axle stanchion-trailer Riedler
incl. 19% VAT
plus Shipping
2-axle stake trailer Riedler
The 2-axle stanchion trailer from "Riedler Fahrzeugbau" reflects its attractive workmanship and appearance as in the original as well as in the model and makes the trailer an unmistakable companion on real roads, as well as in the model on the course.
In conjunction with the TAMIYA Volvo FH16 timber transporter, this articulated train becomes a workhorse and is in no way inferior to the original. The massive frame made of sheet steel in connection with the aluminum stake allow a payload of approx. 5,500g. So that the different lengths of wood also lie optimally on the stanchions, they can be moved and freely positioned on the chassis frame.
To refine the 2-axle stake trailer, an optional set (item no .: 907623, with spare wheel and holder, 2 compressed air tanks and a lashing set) is available.
For use on the TAMIYA Volvo FH16 tractor, the towing hitch with item no .: 907182 is required, the assembly is carried out on the existing frame end crossmember.
Product details:
- 1:14 scale
- Torsionally stiff steel frame in sandwich construction
- Frame made of 3 and 1 mm steel sheet laser cut
and CNC bent
- Turntable made of sheet steel in sandwich construction
- Stored turntable (adjustable) with sliding pad
for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with
Checker plate application
- For easier attachment, the drawbar is attached to two
Tension springs held in the coupling height of 75 mm
- Posts (one piece) milled from solid aluminum material
- Post bracket can be loosened using two grub screws
be repositioned or removed as needed
become.
- Trailer axles with dummy air springs
- Ball-bearing chrome rims with wide tires
- Solid aluminum underride protection (left / right)
- Mudguard splash guard and bumper grille set
- CNC milled aluminum rear bumper
- 7-chamber taillights, license plate holder and
Work lights included
- Decor set
Dim .: LxWxH: 620 x 190 x 305 mm
Weight: 2,600g
- Optional Available: 907623 Accessory set for 2-axle Riedler stanchions
* Official Licensed by Ernst Riedler Fahrzeugbau- und Vertriebs.m.b.H
Attention! Not suitable for children under 14 years.
item code: 907622
3-Axle Heavy Low Loader
incl. 19% VAT
plus Shipping
3-Axle Heavy Low Loader
A successful addition to the various TAMIYA tractors. The ramp can be folded down by hand to drive on.
The kit impresses with the following features:
CNC machined aluminum frame plus king pin
• Height adjustable trailer supports
• 3 axles with twin tires suspended from leaf springs
• ball bearing
• 4-chamber rear lights can be electrically retrofitted.
Suitable for all TAMIYA tractors.
The ramp can be folded down by hand to drive on.
The trailer is equipped with three axles with twin tires. The chassis is suspended with leaf springs. The CNC machined frame is made of aluminum. All supports are mechanically adjustable. The 4-chamber taillights can be electrically retrofitted.
Length: ca. 990 mm, Width:ca. 190 mm, Height: ca. 135mm, Weight:ca .4,5 kg
Attention! Not suitable for children under 14 years.
item code: 907000
2-axis Dump Trailer
incl. 19% VAT
plus Shipping
2-axis Dump Trailer, 1/14 scale, fits the Arocs tipper Tamiya
Technical details:
• Kit
• Steel profile frame (laser cut and welded)
• Trough made of hard PVC (gray)
• 8-way ball-bearing wheels
• Fulda Variotonn off-road tires
• 7-chamber taillights
• Semitrailer axles with air spring dummies
• Automatic 2-hook rear panel lock
Length: 570mm, width: 190mm, height: 200mm, weight: 3.000g
item code: 907425
Attention! Not suitable for children under 14 years.
Goldhofer TU4 flatbed trailer
incl. 19% VAT
plus Shipping
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
Reviews
There are no reviews yet.