2-axle dump truck semi-trailer

2-axle trailer in scale 1/16

suitable for the Büssing 8000 S13 ( item no. 251000 )

The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.

The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.

A lighting set is optionally available for the 2-axle trailer (item no. 251004).

Technical details:

Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.

Scope of delivery:

- Milling plates made of polystyrene for frame, bogie and flatbed
- Drop sides made of injection molded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tires
- Bracket with spare tire
- Platform with real wooden floor
- Tail lights with license plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions

Caution. Not suitable for children under 14 years.

item code: 251003

2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.

Technical details:

- Torsion-resistant steel frame in sandwich construction

- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent

- Bogie made of sheet steel in sandwich construction

- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering

- Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application

- The drawbar is held by two tension springs for easier attachment

- Coupling height 75 mm

- CNC milled aluminum side panels with detailed surface engravings

- The side walls are locked by neodymium magnets

- All 5 drop sides are functional

- 5 hinges per side wall

- 4 hinges on the rear drop side

- Real wood floor application

- Chrome rims with ball bearings and wide tires

- Solid underrun protection made of steel (left / right)

- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)

- Mudguards with splash guards

- Bumper rag set

- CNC machined aluminum rear bumper

- Decor set, detailed building instructions

Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g

Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm

item code: 907624

Attention! Not suitable for children under 14 years.

3-axle dump trucks Fliegl Stone Master

The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.

The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.

Technical details:

Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
 
Optional retrofit parts

Tilting spindle drive No. 907217

Motor for spindle drive No. 907166

Motorized support legs No. 907218

Motor for trailer supports No. 907199 - required 2x

item code : 907216