Transfer gear box with differential
Transfer gear box
2-speed control gear box
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324
Item code: 242424
3-speed gearbox with transfer case
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
3-speed gearbox
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100