3-speed gearbox with transfer case and self-locking differential

317,90 
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm. The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm. Contents: 1 manual gearbox with distributor, fixing screws, linkages item code: 251106 Warning! Not suitable for children under 14 years.

Four-wheel transfer case 2:1 with self-locking differential

137,50 
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages item code: 251205 Warning! Not suitable for children under 14 years.

Four-wheel transfer case 1:1 with self-locking differential

137,50 
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages item code: 251200 Warning! Not suitable for children under 14 years.

Transfer case 4WD 2:1

107,80 
Transfer case 4WD, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 2:1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages Item code 251195

Planetary gear metal

27,40 
Planetary gear metal, speed reduction 3:1, output shaft 4mm, housing from plastic, gear wheels from steel Item code 215589

Planetary gear metal

27,40 
Planetary gear metal, speed reduction 6:1, output shaft 4mm, housing from plastic Item code 224503

Planetary gear plastic

16,40 
Planetary gear plastic, speed reduction 6:1, output shaft 4mm, housing and gear wheels from plastic Item code 224504

TRANSFERCASE FOR 4WD DRIVE 1:1

107,80 
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages Item code 251190

Transfer gear box, shiftable

115,50 
Transfer gear box, shiftable, scale 1:8, perfect for off-road-driving, the front axle can be switching on or off with a servo, speed reduction 3:1, housing from aluminum, pinion`s from steel, hardened, with ball bearing, holder from aluminum Item code: 216933