Goldhofer TU4 flatbed trailer
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
Cab lock MB Arocs,
Cardan taker, 4mm bore
Cardan taker, 4mm bore, made of steel, with transverse bore M3 for mounting on the drive shaft, suitable for the rear axle item code: 251210, for cardan shaft assembly item code: 224489, for double cardan item code: 224490 and to the planetary gears item code: 215589, 224503 and 224504, Contents: 2 drivers, 2 stud bolts M3x3
item code: 224499
Warning! Not suitable for children under 14 years.
MB Arocs headlamp 12V
MB Arocs headlamp 12V, suitable for the Arocs tractor and the Arcos tipper Tamiya, 6 light functions: turn signal front, side marker lamp with turn signal function (as the original vehicle lights the turn signal brighter than the marker lamp), parking lights, headlights, high beam and Fog lights, colored litz wire with a length of approx. 20cm, contents: 1 left and 1 right lighting board, mounting material, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907597
Warning! Not suitable for children under 14 years.
MB Arocs headlamp 7.2V
MB Arocs headlamp 7.2V, suitable for the Arocs tractor and the Arcos tipper Tamiya, 6 light functions: turn signal front, side marker lamp with turn signal function (as the original vehicle lights the turn signal brighter than the marker lamp), parking lights, headlights, high beam and Fog lights, colored litz wire with a length of approx. 20cm, contents: 1 left and 1 right lighting board, mounting material, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907596
Warning! Not suitable for children under 14 years.
Top light holder MB Arocs
Top light holder MB Arocs, scale 1/14, suitable for the Arocs of Tamiya, plastic top light holder, headlight housing in black, four holders for the additional mounting of worklights (item code: 907144 and 907578), Contents: 1 Top light holder, 4 headlamp housing , 4 clear glasses, 4 blue glasses, 4 holders, mounting material and instructions (delivery without bulbs)
item code: 907599
Warning! Not suitable for children under 14 years.
6-chamber tail light with lighting board 7.2 volt
6-chamber tail light with lighting board 7.2 volt, ready-made, suitable for the scale 1/16 – 1 / 14.5, with plastic inserts for better illumination of the individual chambers, equipped with SMD LEDs, common positive pole, 5 light functions: turn signal, brake light, Driving light + position light, reversing lamp and fog lamp, cable length approx. 60cm, dim .: LxWxH: 38x11x6,5mm, content: 1 tail light left, 1 tail light right, 4 fixing screws M2x6, instructions
item code: 191531
Warning! Not suitable for children under 14 years
6-chamber tail light with lighting board 12 volt
6-chamber tail light with lighting board 12 volt, ready-made, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, equipped with SMD LEDs, common positive pole, 5 light functions: turn signal, brake light, Driving light + position light, reversing lamp and fog lamp, cable length approx. 60cm, dim .: LxWxH: 38x11x6,5mm, content: 1 tail light left, 1 tail light right, 4 fixing screws M2x6, instructions
item code: 191532
Warning! Not suitable for children under 14 years
7-chamber tail light with lighting board 12 volts
7-chamber tail light with lighting board 12 volts, ready assembled, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive pole, 4 light functions: turn signals, Taillight, brake light and reversing light, cable length approx. 60cm, dim .: LxWxH: 32x12x7mm, content: 1 tail light left, 1 tail light right, 4 fastening screws M2x6, instructions
item code: 191537
Warning! Not suitable for children under 14 years
7-chamber tail light with lighting board 7.2 volts
7-chamber tail light with lighting board 7.2 volts, ready assembled, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive pole, 4 light functions: turn signals, Taillight, brake light and reversing light, cable length approx. 60cm, dim .: LxWxH: 32x12x7mm, content: 1 tail light left, 1 tail light right, 4 fastening screws M2x6, instructions
item code: 191536
Warning! Not suitable for children under 14 years
Tank bracket set
Tank bracket set, suitable for the 3-axle Arocs (not suitable for the new tipper) and Actros from Tamiya, for attaching the tanks to the frame when the original battery compartment is removed. Contents: 2 aluminum brackets, mounting screws, instructions
item no: 907584
Warning! Not suitable for children under 14 years.
Truck antenna set universal
3-speed gearbox with transfer case and self-locking differential
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
item code: 251106
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 2:1 with self-locking differential
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 1:1 with self-locking differential
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251200
Warning! Not suitable for children under 14 years.
1/16 rim adapter rear for double tires
Driven front axle with self-locking differential
Driven front axle with self-locking differential, very true to detail, for truck models in the scale 1/16.
The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing.
• Lifelike front axle
• high ground clearance thanks to a "slim" differential housing (height 35 mm)
• 13-times ball-bearing
• self-locking differential (shift servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model.
• 4 mm transmission / input shaft
• Axle shaft 6mm, fits the most popular rims in 1/16 scale
• simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit)
• Dimensions front axle LxWxH: 57 x 167 x 35 mm
• with flanged wheel hub, suitable for the most common rims in 1/16 scale
• Weight approx. 160 g
• Supplied as a kit with pre-assembled differential
• suitable for the most common axle suspensions, including attachment point for pendulum suspension systems
item code: 251215
Warning! Not suitable for children under 14 years.
Warning! Not suitable for children under 14 years. 
Rear axle with self-locking differential
Rear axle with self-locking differential, very true to detail, for truck models in the scale 1/16.
The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing.
• Exactly modeled rear axle
• high ground clearance thanks to a "slim" differential housing (height 35 mm)
• 11 ball bearings
• self-locking differential (shift servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model.
• 4 mm transmission / input shaft
• Axle shaft 6mm, fits the most popular rims in 1/16 scale
• simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit)
• Dimensions rear axle LxWxH: 46 x 165 x 35 mm
• Weight approx: 130 g
• Supplied as a kit with pre-assembled differential
• suitable for the most common axle suspensions, including attachment point for pendulum suspension systems
item code: 251210
Warning! Not suitable for children under 14 years.
Trailer support set small
Trailer support set small, scale 1/14, housing made of aluminum, steel stamp with clamping screw, aluminum base, fixing screws. Dim. : Housing 10x10x34,5mm with 2 mounting holes M3, punch 5 Ø x 32mm, foot 19 Ø x 3,5mm, total length retracted: 38mm, extended 63mm, content: 2 housings, 2 punches, 2 feet, 2 clamping screws and four fixing screws M3x6
item code: 907589
Warning! Not suitable for children under 14 years.
2-axle dump truck semi-trailer
2-axle dump truck semi-trailer, Tamiya scale, kit, tailgate with automatic 2-hook lock
- Trough and rear wall made of hard PVC, milled
- Air spring dummies
- Aluminum chassis, milled
- 8 times ball-bearing
- 4 semi-trailer rims, wide
- 4 wide tires
- 7-chamber taillights (without bulbs)
- license plate (illuminated)
- Plastic mudguards with holders
- Latch tailgate
- Aluminum underrun protection, milled
- Semi-trailer props, mechanically adjustable
- Pedestal aluminum / plastic
- Hydraulic cylinder dummy
item code : 907312
Warning! Not suitable for children under 14 years.
Warning! Not suitable for children under 14 years. 
3-axle Fliegl Megarunner
3-axle Fliegl Megarunner, in the Tamiya scale, kit, new aluminum door hinges with 270 ° opening angle, new door locks
The kit contains no painted parts
- Air spring dummies on all 3 axes
- steel frame, (laser cut)
- Tarpaulin red with Fliegl logo
- 6 semi-trailer rims, wide, chrome + 6 wide tires
- Wheels are 12 ball bearings
- 7-chamber taillights (without bulbs)
- Underride protection made of steel
- license plate (illuminated)
- Plastic mudguards with brackets
- Semi-trailer bumper with lasered Fliegl logo
- Semi-trailer props, mechanically height adjustable
- Spare wheel holder one-armed
- Detailed construction manual
Dimensions: 995x195x270mm Weight 6.000 gr. Max.load 10kg.
item code : 907235
Warning! Not suitable for children under 14 years.
Trailer door hinge
Number plate holder and buffer
License plate light, scale 1/16-1/14,5
SMD blue 7.2V with cable
SMD orange 7.2V wit cable
SMD white 7,2 Volt with cable
RECATULAR SPOTLIGHT 12VOLT
RECATULAR SPOTLIGHT, scale 1/14, with lighting board 12 Volt, , housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Item code : 907578
RECATULAR SPOTLIGHT 7.2VOLT
RECATULAR SPOTLIGHT, scale 1/16 to 1/14,5, with lighting board 7,2 Volt, housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Item code : 207077
SIGNAL LIGHT ROUND
WORKING HEAD LIGHT (SLEWABLE)
7 – chamber LED board 12 Volt
7 – chamber LED board 7,2 Volt
6 – CHAMBER – TAIL LAMPS
6 – chamber LED board 12 Volt
