2-web crawler, black, Scale 1/8
2-web crawler, black, Scale 1/8, made of fiberglass-reinforced plastic, chain plate is screwed to the connectors, chain pins and roller steel chain width 70mm, overall height 22mm, width connectors with bolt 31mm / without bolt 24mm, coil diameter 8mm, height chain plate 7mm, total length 131mm, 25mm pitch, content: 5 chain plates, 5 sentence connectors, 5 chain pins, 5 reel, 5 circlips, 20 hex bolts and square nuts M2 steel, manual
item code : 215081
2-web crawler, traffic gray, Scale 1/8
2-web crawler, traffic gray, Scale 1/8, made of fiberglass-reinforced plastic, chain plate is screwed to the connectors, chain pins and roller steel chain width 70mm, overall height 22mm, width connectors with bolt 31mm / without bolt 24mm, coil diameter 8mm, height chain plate 7mm, total length 131mm, 25mm pitch, content: 5 chain plates, 5 sentence connectors, 5 chain pins, 5 reel, 5 circlips, 20 hex bolts and square nuts M2 steel, manual
item code : 215080
MB Actros marker lights for 7.2 and 12 V
MB marker lights for 7.2 and 12 V., suitable for the Actros from Tamiya, 2 roof marker lights in white;, 2 side lights in orange for the side panel, cable length 30cm, capacity: 1 harness with 2 LED in white, 2 orange LED with cable, installation guide
Item code : 907560
Not compatible with the MFC from Tamiya
MB headlights board 12V
MB headlights board 12V, suitable for the Actros from Tamiya, 6 light functions: Turn signal, side marker light with turn signal function (as in the original vehicle turn signal lights brighter than the front position lamp), side lights, headlights, high beam and fog lights, coloured braided cable with a length of 25cm, contents: 1 left and 1 right lighting board, mounting hardware, installation instructions
Item code : 907559
MB Actros headlights board 7.2V
MB headlights board 7.2V, suitable for the Actros from Tamiya, 6 light functions: Turn signal, side marker light with turn signal function (as in the original vehicle turn signal lights brighter than the front position lamp), side lights, headlights, high beam and fog lights, coloured braided cable with a length of 20cm, contents: 1 left and 1 right lighting board, mounting hardware, installation instructions
Item code : 907558
Not compatible with the MFC from Tamiya
MB Actros – Arocs Rear light board 12 V
MB Actros - Arocs Rear light board 12 V, suitable for the Actros- Arocs from Tamiya ( not suitable for the Arocs tipper ), 4 light functions: turn signal, running light, brake light and reversing light, colored braided cable with a length of about 50cm, capacity: 1 left and 1 right lighting board, installation instructions
Attention: Not suitable for the MFC of Tamiya
Item code: 907557
MB Actros – Arocs Rear light board 7.2 V
Rear light board 7.2 V, suitable for the Actros- Arocs from Tamiya ( not suitable for the Arocs tipper ), 4 light functions: turn signal, running light, brake light and reversing light, colored braided cable with a length of about 50cm, capacity: 1 left and 1 right lighting board, installation instructions
Attention: Not suitable for the MFC of Tamiya
Item code: 907556
Ramp-Set Goldhofer
Ramp-Set Goldhofer, scale 1/14, ramp 3/4 - 1/2, steel, Folding and sliding, wooden pad, cylinder dummy's function, with support rods and attachments, dim. Ramp length 290mm, ramp width 47mm, overall height 220mm, capacity: 2 ramps long, 2 short ramps, 4 wooden support pads, 2 bars, 4 cylinder dummy's, 2 mounting brackets, rope and redirection, hinges, mounting hardware, instructions
Item code : 907376
Pole for Trailer hitch
Spindle drive rear ripper
Frame access cover fourwheeler
Frame access cover fourwheeler, scale 1/14, from VA-chequered plate lasered and formed, drill holes for MFC are designed and can be taken out if you need, suitable for the Volvo, Scania, MAN and MB fom Tamiya, measure: length 295mm, width 180mm, thickness 0,8mm, weight 220g, included: 1 access cover, 6 screws from VA
Item code: 907180
Flat Bed Twin Rim Chrome
HELLA AUXILIARY HEAD LIGHT CHROM, ANGEL EYES WHITE
Hella auxiliary head light chrom, with Angel Eyes, for 7,2 and 12 Volt, with two operation`s for the light, side light shine`s white, traveling light shine`s white, fixing holder 5mm, included: 2 housings with holder (chrome), 2 blue and 2 clear glasses, 2 reflector`s, 2 boards, 1 diode, fixing screws, instruction
Licensed by Hella
Item code : 907574
HELLA AUXILIARY HEAD LIGHT BLACK, ANGEL EYES WHITE
Hella auxiliary head light black, with Angel Eyes, for 7,2 and 12 Volt, with two operation`s for the light, side light shine`s white, traveling light shine`s white, fixing holder 5mm, included: 2 housings with holder (black), 2 blue and 2 clear glasses, 2 reflector`s, 2 boards, 1 diode, fixing screws, instruction
Licensed by Hella
Item code : 907573
Angel Eyes LED board for 7,2 und 12 Volt, white
Angel Eyes LED board for 7,2 und 12 Volt, white, two operation`s for the light, the ring from the side light`s shine white, the traveling light shine white, suitable for all top light and front light holder, also for the auxiliary head light`s, included: 2 board`s with a cable with a length from 20cm, 2 reflector, 1 diode for 12 Volt operation, instruction
Item code: 907555
Not compatible with the MFC from Tamiya
Splash guard – set
Underrun protection
Trailer hitch with drawbar
Trailer hitch with drawbar, scale 1:14, housing and drawbar made of plastic boosted with fibre glass, mechanics made of steel, it works by hand or with a servo, measure: width 30mm, height 30mm, depth 36mm, fixing plate: width 22mm, height 12mm, depth 7mm, includet: 1 couplingl, 1 drawbarl, fixing screws, instruction
Item code: 907182
Electronic unit LR 634
Electronic unit LR 634, included: 5 controller, the left and the right track forward and back, lift arm up and down, tilting forward and back, rear ripper up and down, infinitely variable, for operation the tilting and lifting with limit switch,signal for drive back, light effect, voltage control: 1 electronic unit, 1 limit switch lift arm, 1 limit stop tilting, cabling for the lighting, connecting cable, instruction
Item code: 907103
Grip handle ramp
Aluminum rims – set, drive system axle
Aluminum rims – set front axle
HELLA AUXILIRAY HEAD LIGHT BLACK, ANGEL EYES BLUE
Hella auxiliary head light black, with Angel Eyes, for 7,2 and 12 Volt, with two operation`s for the light, side light shine`s blue, traveling light shine`s white, fixing holder 5mm, included: 2 housings with holder (chrome), 2 blue and 2 clear glasses, 2 reflector`s, 2 boards, 1 diode, fixing screws, instruction
Licensed by Hella
Item code : 907571
HELLA AUXILIARY HEAD LIGHT CHROM, ANGEL EYES BLUE
Hella auxiliary head light chrom, with Angel Eyes, for 7,2 and 12 Volt, with two operation`s for the light, side light shine`s blue, traveling light shine`s white, fixing holder 5mm, included: 2 housings with holder (chrome), 2 blue and 2 clear glasses, 2 reflector`s, 2 boards, 1 diode, fixing screws, instruction
Licensed by Hella
Item code : 907572
Angel Eyes LED board for 7,2 und 12 Volt, blue
Angel Eyes LED board for 7,2 und 12 Volt, blue, two operation`s for the light, the ring from the side light`s shine blue, the traveling light shine white, suitable for all top light and front light holder, also for the auxiliary head light`s, included: 2 board`s with a cable with a length from 20cm, 2 reflector, 1 diode for 12 Volt operation, instruction
Item code : 907554
Not compatible with the MFC from Tamiya
Cap wheel hub wide rim
Top light LED board, 12 Volts
Top light LED board, 12 Volt, with a SMD and series resistance, length from the cable 20cm, diameter from the board 8mm, suitable for the front light and top light holder with item code: 907064, 907065, 907076, 907095, 907124 and 907134, also for the top light - set`s with item code: 907575 und 907052, included: 2 boards
Item code : 907399
RECATULAR SPOTLIGHT 12VOLT
RECATULAR SPOTLIGHT, scale 1/16 to 1/14,5, with lighting board 12 Volt, , housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Item code : 207078
RECATULAR SPOTLIGHT 7,2Volt
RECATULAR SPOTLIGHT, scale 1/14, with lighting board 7.2 Volt, , housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Caution! Not suitable for children under the age of 14.
Item code : 907144
Pylons
Top light LED board, 7,2 Volts
Top light LED board, 7,2 Volt, with a SMD and series resistance, length from the cable 20cm, diameter from the board 8mm, suitable for the front light and top light holder with item code: 907064, 907065, 907076, 907095, 907124, also for the top light - set`s with item code: 907575 und 907052, included: 2 boards
Item code : 907184
MAN taillight board 12V
MAN taillight board 7.2V
Gear actuation set LR 634
Gear actuation set LR 634 Included in the gear actuation set for the LR 634, are all the piece`s required for the actuation of the track loader. Sprocket`s are made from hardened steel, with ball bearing, motor-holder from aluminum, fixing parts and fixing instruction, we have a proper gear motor with item code: 907106 ( you need 2 of them ), includet:: 1 motor holder for right and 1 motor holder for left, a pair of bevel pinion`s pre-installed, drive shaft with cogging, screws and instruction
Item code: 907105
Spindle drive set lift & bucket LR 634
Spindle drive set lift & bucket LR 634, suitable for the Liebherr track loader LR 634 with item code: 907111. Spindle`s and driving pinion`s are from hardened steel, housing from aluminium, pre-installed, with all of the fixing parts and instruction, included: 1 lift spindle and 1 bucket spindle with a cylinder cap. Therefor suitable the gear motor`s with item code: 907108 for the bucket and 907066 for the lift (not included in this set).
Item code: 907102