License plate light, scale 1/14
Alu – pallet box
Alu - pallet box, scale 1/14, model kit flaps to open, with 6 Euro plastic pallets, dim .: length 180mm, width 190mm, height 70mm, suitable for a frame width of 96mm, suitable for semi-trailers from Carson, Contents: 1 set of milled aluminum, mounting screws, 6 plastic pallets, building instructions
item code : 907379
3 + 1-chamber rear light
Cascadia back light board 12V
Cascadia back light board 12V, suitable for the Cascadia from Tamiya, 5 light functions: turn signal left + right, running light, brake light and reversing lights, colored braided cable with a length of about 60cm, Contents: 1 lighting board, installation instructions
item code : 907562
Not compatible with the MFC from Tamiya
Cascadia back light board 7.2V
Cascadia back light board 7.2V, suitable for the Cascadia from Tamiya, 5 light functions: turn signal left + right, running light, brake light and reversing lights, colored braided cable with a length of about 60cm, Contents: 1 lighting board, installation instructions
item code : 907561
Not compatible with the MFC from Tamiya
Scania headlights board 7.2 volt
Scania headlights board 7.2 volt, suitable for the Scania from Tamiya, 5 light functions: Indicator front, side lights, headlights, high beams and fog lights, colored braided cable with a length of 20cm, Contents: 1 left and 1 right lighting board, mounting hardware, installation instructions
item code : 907565
Not compatible with the MFC from Tamiya
Truck fanfare set
Gear motor spindle drive Fliegl
Gear motor spindle drive Fliegl, rated voltage 7.2 volts, idle speed 262 rev / min, continuous current 1.5A peak torque 588mNm, reduction ratio 66: 1, weight 88g, dim .: total length 90mm, diameter 22mm, output shaft 6 Ø x 15mm, 3 mounting holes M3 , Contents: 1 gear motor
item code : 907166
electrical support legs set
electrical support legs set, 1:14 scale, housing made of aluminum, steel punch with clamping screw, aluminum base, fixing screws. Dim. : Housing 15x15x73mm with 2 mounting holes M3, stamp 8 diameter x 62mm, retracted foot 19 dia x 3.5mm, total length: 76.5, extended 114mm, Contents: 2 Housing, 2 punch, 2 feet, 2 clamp screws and four mounting screws M3x6
item code : 907218
Gearmotor e-Support
Spindle drive for Fliegl Stone Master
Spindle drive for Fliegl Stone Master, the toggle pin "Z bar" for the motorized drive of the trough gives the CARSON 3-axle dump trucks Fliegl Stone Master (Item code 907216) a more prototypical function. For Operating a geared motor No. 907166 required.
Technical specifications: Material aluminum with steel bolts / shafts
item code : 907217
