Wide base tyre Fulda Multitonn 2
26,49 € 23,84 €
incl. 19% VAT plus Shipping
Wide base tyre Fulda Multitonn 2, scale 1/14, diameter outside 83 mm, diameter inside 44 mm, width 27 mm, tube-chamber tire, with inscription, Quantity: 2 pieces
Item code : 907012
In stock
Wide base tyre Fulda Multitonn 2, scale 1/14, diameter outside 83 mm, diameter inside 44 mm, width 27 mm, tube-chamber tire, with inscription, Quantity: 2 pieces
| Weight | 1 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
You must be logged in to post a review.
Related products
Four-wheel transfer case 2:1 with self-locking differential
incl. 19% VAT
plus Shipping
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
Semitrailer rim chromed with hexagon socket
incl. 19% VAT
plus Shipping
Semitrailer rim chromed, scale 1/14, plastic, cover cap black, with hexagon socket, diameter 49mm, width 27,5mm, suitable for the wide base tyre with item code: 907012 , with this part it is posible to change fromtwin tyres to single tyres at all Tamiya trailers, Quantity: 2 rims, 2 cap (tyres are not included at this shipment)
Item code : 907053
TRANSFERCASE FOR 4WD DRIVE 1:1
incl. 19% VAT
plus Shipping
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251190
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
Reviews
There are no reviews yet.