Individual marker lights
35,90 €
incl. 19% VAT plus Shipping
Individual marker lights, scale 1/16 to 1/14.5, 7.2 to 12 volts, made of flexible rubber, white and red LEDs, with 10 cm of enameled wire, dimensions: Length 18 mm, height 9 mm, width 5 mm, base 9 x 4 mm, the light is attached using superglue, contents: 1 right-hand, 1 left-hand contour light, instructions
Warning! Not suitable for children under 14 years of age.
item code: 191520
In stock
Individual marker lights, scale 1/16 to 1/14.5, 7.2 to 12 volts, made of flexible rubber, white and red LEDs, with 10 cm of enameled wire, dimensions: Length 18 mm, height 9 mm, width 5 mm, base 9 x 4 mm, the light is attached using superglue, contents: 1 right-hand, 1 left-hand contour light, instructions
Warning! Not suitable for children under 14 years of age.
| Weight | 0,005 kg |
|---|---|
| Dimensions | 13 × 7 × 0,5 cm |
You must be logged in to post a review.
You may also like…
3-chamber tail light with lighting board
incl. 19% VAT
plus Shipping
3-chamber tail light with lighting board, scale 1/14, for 7,2 Volt, for 12 Volt use supplied diode, light functions: Rear light, brake light and turn signal, black perforated mask for LED - effect, cable length approx. 550mm, Ø of housing 11mm, height 7,5mm, fixing screw centered M2, content: 2 prefabricated housings with light inserts, circuit board and cable, 2x red glasses, 2x orange glasses, 2x perforated mask self-adhesive, 2x fixing screw, 1 diode at 12 Volt operating voltage
item code: 907679
Attention : Not suitable for the MFC from Tamiya
Attention. Not suitable for children under 14 years.
Related products
Scania SLT8x4 warning bar/strobo set
incl. 19% VAT
plus Shipping
Scania SLT8x4 warning bar/strobo set, suitable for the Scania SLT8x4 from Tamiya, for 7.2 or 12 volt, warning bar SMD LED circuit board with 40 SMD LEDs, 2 rotating beacons
with strobe function, contents: 1 warning bar circuit board, 2 rotating beacon inserts, installation instructions
Suitable electronics: 907685 Universal light module LBS (not included)
Attention : Not suitable for the MFC
Caution! Not suitable for children under 14 years of age.
item code: 907697
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
Reviews
There are no reviews yet.